| Issue Date | Title | Author(s) | Source | scopus | WOS | Fulltext/Archive link |
1 | 1999 | Analytical and numerical analyses for two-dimensional stress transfer | Hsueh C.H.; Fuller Jr. E.R.; Langer S.A.; Carter W.C.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
2 | 1999 | Surface-roughness induced residual stresses in thermal barrier coatings: computer simulations | Hsueh C.H.; Becher P.F.; Fuller Jr. E.R.; Langer S.A.; Carter W.C.; CHUN-HWAY HSUEH | Materials Science Forum | | | |
3 | 1999 | Criteria for formation of interface dislocations in a finite thickness epilayer deposited on a substrate | Zhang T.-Y.; Lee S.; Guido L.J.; Hsueh C.-H.; CHUN-HWAY HSUEH | Journal of Applied Physics | | | |
4 | 1999 | Effects of interface roughness on residual stresses in thermal barrier coatings | Hsueh, C.-H.; Haynes, J.A.; Lance, M.J.; Becher, P.F.; Ferber, M.K.; Fuller Jr.; E.R.; Langer, S.A.; Carter, W.C.; Cannon, W.R.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
5 | 1999 | Model experiment on a protrusion method for measurement of interface shear sliding stress in fiber-reinforced composite | Kagawa Y.; Hsueh C.-H.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
6 | 1999 | Influence of residual stress on thermal expansion behavior | Wang X.-L.; Hoffmann C.M.; Hsueh C.H.; Sarma G.; Hubbard C.R.; Keiser J.R.; CHUN-HWAY HSUEH | Applied Physics Letters | | | |
7 | 1999 | Toughening Behavior in Ceramics and Cermets | Becher P.F.; Sun E.Y.; Hsueh C.H.; Plucknett K.P.; Kim H.D.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Key Engineering Materials | | | |
8 | 1999 | Debonding behavior between ?]-Si3N4 whiskers and oxynitride glasses with or without an epitaxial ?]-SiAlON interfacial layer | Sun E.Y.; Becher P.F.; Hsueh C.-H.; Painter G.S.; Waters S.B.; Hwang S.-L.; Hoffmann M.J.; CHUN-HWAY HSUEH | Acta Materialia | | | |
9 | 1998 | Some applications of two-dimensional stress transfer analyses | CHUN-HWAY HSUEH | Acta Materialia | | | |
10 | 1998 | Microstructural design of silicon nitride with improved fracture toughness: II, Effects of yttria and alumina additives | Sun E.Y.; Becher P.F.; Plucknett K.P.; Hsueh C.-H.; Alexander K.B.; Waters S.B.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
11 | 1998 | Some considerations of asymmetric cracking in an applied-moment double cantilever beam | Hsueh C.H.; Sun Y E.; Becher P.F.; Li J.B.; CHUN-HWAY HSUEH | Journal of Materials Science | | | |
12 | 1998 | Microstructural design of silicon nitride with improved fracture toughness: I, Effects of grain shape and size | Becher P.F.; Sun E.Y.; Plucknett K.P.; Alexander K.B.; Hsueh C.-H.; Lin H.-T.; Waters S.B.; Westmoreland C.G.; Kang E.-S.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
13 | 1998 | Elastic strain energy change during matrix cracking in unidirectional, fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
14 | 1998 | Crack profiles in applied moment double cantilever beam tests | Hsueh C.H.; Sun E.Y.; Becher P.F.; Plucknett K.P.; CHUN-HWAY HSUEH | Journal of Materials Research | | | |
15 | 1998 | Interfacial shear debonding problems in fiber-reinforced ceramic composites | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Acta Materialia | | | |
16 | 1997 | Effects of interfacial roughness on fibre push-out | Hsueh C.H.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
17 | 1997 | Stress transfer in a model composite containing a single embedded fiber | Hsueh C.H.; Young R.J.; Yang X.; Becher P.F.; CHUN-HWAY HSUEH | Acta Materialia | | | |
18 | 1996 | R-curve response of silicon carbide whisker-reinforced alumina: microstructural influence | Sun E.Y.; Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Research Society Symposium | | | |
19 | 1996 | Influence of reinforcement content and diameter on the R-curve response in SiC-whisker-reinforced alumina | Becher P.F.; Hsueh C.-H.; Alexander K.B.; Sun E.Y.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
20 | 1996 | Criteria for progressive interfacial debonding with friction in fiber-reinforced ceramic composites | Hsueh Chun-Hway; CHUN-HWAY HSUEH | Materials Research Society Symposium | | | |
21 | 1996 | Experimental and theoretical aspects of slice compression tests | Hsueh C.H.; Brandon D.G.; Shafry N.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
22 | 1996 | Analyses of residual thermal stresses in ceramic matrix composites | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Ceramic Engineering and Science Proceedings | | | |
23 | 1996 | Debonding of interfaces between beta-silicon nitride whiskers and Si-Al-Y oxynitride glasses | Becher P.F.; Sun E.Y.; Hsueh C.-H.; Alexander K.B.; Hwang S.-L.; Waters S.B.; Westmoreland C.G.; CHUN-HWAY HSUEH | Acta Materialia | | | |
24 | 1996 | Residual thermal stresses in ceramic composites, part II: With short fibers | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
25 | 1996 | Residual thermal stresses in ceramic composites. Part I: With ellipsoidal inclusions | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
26 | 1996 | Crack-wake interfacial debonding criteria for fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Acta Materialia | | | |
27 | 1995 | Foreword | Hsueh C.-H. ; Hui D. | Composites Engineering | 1 | 0 | |
28 | 1995 | Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites - Part II Cracking due to residual stresses | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
29 | 1995 | Analyses of fiber push-out tests performed on Nicalon/SiC composites with tailored interfaces | Hsueh C.H.; Rebillat F.; Lamon J.; Lara-Curzio E.; CHUN-HWAY HSUEH | Composites Engineering | | | |
30 | 1995 | Matrix cracking with bonded interfaces in unidirectional fibre-reinforced composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
31 | 1995 | Analyses of slice compression tests for aligned ceramic matrix composites-II. Type II boundary condition | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | | | |
32 | 1995 | Thermal expansion anisotropy in hot-pressed SiC-whisker-reinforced alumina composites | Becher P.F.; Hsueh C.-H.; Waters S.B.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
33 | 1995 | Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
34 | 1995 | Using Microstructure to Attack the Brittle Nature of Silicon Nitride Ceramics | Becher, P.F.; Hwang, S.-L.; Hsueh, C.-H.; CHUN-HWAY HSUEH | MRS Bulletin | | | |
35 | 1995 | Stress transfer from axially loaded fiber to matrix in a microcomposite | Hsueh Chun-Hway; CHUN-HWAY HSUEH | Materials Research Society Symposium | | | |
36 | 1995 | Internal Stresses and the Martensite Start Temperature in Alumina?Zirconia Composites: Effects of Composition and Microstructure | Alexander K.B.; Becher P.F.; Wang X.?L.; Hsueh C.?H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
37 | 1995 | A modified analysis for stress transfer in fibre-reinforced composites with bonded fibre ends | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
38 | 1995 | Determination of the R?Curve from the Strength?XIndentation Load Relation | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
39 | 1995 | Modeling of elastic stress transfer in fiber-reinforced composites | CHUN-HWAY HSUEH | Trends in Polymer Science | | | |
40 | 1995 | Matrix cracking stresses of unidirectional ceramic matrix composites | CHUN-HWAY HSUEH | Key Engineering Materials | | | |
41 | 1994 | Pull-out of a ductile fibre from a brittle matrix - Part I Shear lag model | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
42 | 1994 | Sintering of regular two-dimensional arrays of particles surface and grain boundary diffusion | Zhang W.; Schneibel J.H.; Hsueh C.-H.; CHUN-HWAY HSUEH | Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties | | | |
43 | 1994 | An asymptotic approach for debonding at the fiber-matrix interface | CHUN-HWAY HSUEH | Materials Science and Engineering A | 3 | 3 | |
44 | 1994 | A 2-Dimensional Stress Transfer Model for Platelet Reinforcement | Hsueh, Ch; CHUN-HWAY HSUEH | Composites Engineering | | 29 | |
45 | 1994 | Consideration of radial dependences of axial stresses in the shear-lag model for fibre pull-out | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
46 | 1994 | Theoretical and experimental studies of fiber pull-out of SiC fiber-reinforced glasses | Hsueh C.H.; Tsuda H.; Enoki M.; Kishi T.; CHUN-HWAY HSUEH | Journal of the European Ceramic Society | | | |
47 | 1994 | Slice Compression Tests Versus Fiber Push-In Tests | CHUN-HWAY HSUEH | Journal of Composite Materials | | | |
48 | 1994 | Pull-out of a ductile fibre from a brittle matrix - Part II A simplified model | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
49 | 1993 | The relative residual fibre displacement after indentation loading and unloading of fibre-reinforced ceramic composites | Hsueh C.H.; Ferber M.K.; Wereszczak A.A.; CHUN-HWAY HSUEH | Journal of Materials Science | | | |
50 | 1993 | Embedded-end debonding during fiber pull-out | CHUN-HWAY HSUEH | Materials Science and Engineering A | 7 | 4 | |
51 | 1993 | Evaluations of residual axial stresses and interfacial friction in Nicalon fibre-reinforced macro-defect-free cement composites | Hsueh C.H.; Ferber M.K.; CHUN-HWAY HSUEH | Journal of Materials Science | | | |
52 | 1993 | Some considerations of two-way debonding during fibre pull-out | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
53 | 1993 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IX: A simple treatment of Poisson's effect for frictional interfaces | Chun-Hway Hsueh; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
54 | 1993 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites, X: with an elastic interfacial coating | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
55 | 1993 | Analyses of slice compression tests for aligned ceramic matrix composites | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | | | |
56 | 1993 | Evaluation of Interfacial Properties of Fiber?Reinforced Ceramic Composites Using a Mechanical Properties Microprobe | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
57 | 1992 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites. VIII: The energy-based debonding criterion | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
58 | 1992 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites VII:improved analyses for bonded interfaces | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
59 | 1992 | Strength versus energy debonding criteria at fiber/matrix interfaces | CHUN-HWAY HSUEH | Composites Engineering | | | |
60 | 1992 | Modifications of fibre pull-out analysis | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
61 | 1992 | Requirements of frictional debonding at fiber/matrix interfaces for tough ceramic composites | CHUN-HWAY HSUEH | Composites Engineering | | | |
62 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part VI. Interpretation of fiber pull-out curves | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
63 | 1991 | Interfacial properties of SiC-borosilicate glass composites evaluated from pushout and pullout tests | Hsueh C.-H.; Bright J.D.; Shetty D.K.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
64 | 1991 | Some applications of fibre pullout analyses | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
65 | 1991 | Toughening Behavior and Interfacial Properties of Fiber-Reinforced Ceramic Composites | CHUN-HWAY HSUEH | Journal of Energy Resources Technology, Transactions of the ASME | | | |
66 | 1991 | Thermal stresses due to thermal expansion anisotropy in materials with preferred orientation | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
67 | 1991 | Some considerations of bridging stresses for fiber-reinforced ceramics | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Composites Engineering | | | |
68 | 1991 | Some Considerations of Determination of Residual Stresses and Young's Moduli in Ceramic Coatings | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
69 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IV: sliding due to residual stresses | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
70 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part V. With a viscous interface | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
71 | 1991 | Thermal and mechanical induced stresses in superconducting YBa 2Cu3Ox coatings on fibers | Hsueh C.H.; Becher P.F.; Lackey W.J.; CHUN-HWAY HSUEH | Journal of Applied Physics | | | |
72 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites III: With residual radial and axial stresses | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
73 | 1990 | Evaluation of interfacial shear strength, residual clamping stress and coefficient of friction for fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | | | |
74 | 1990 | Effects of Friction in Ceramic Coating/Fiber Composites | Lu M.-C.; Hsueh C.-H.; CHUN-HWAY HSUEH | Journal of Composite Materials | | | |
75 | 1990 | Effects of interfacial bonding on sliding phenomena during compressive loading of an embedded fibre | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
76 | 1990 | Interfacial friction analysis for fibre-reinforced composites during fibre push-down (indentation) | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
77 | 1990 | Toughening behavior and interfacial properties of fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | American Society of Mechanical Engineers, Petroleum Division | | | |
78 | 1990 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
79 | 1990 | Theoretical comparison of two loading methods in fiber pull-out tests | CHUN-HWAY HSUEH | Materials Science and Engineering A | 16 | 17 | |
80 | 1990 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites II: Non-constant interfacial bond strength | CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
81 | 1990 | Fibre pullout against push-down for fibre-reinforced composites with frictional interfaces | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
82 | 1989 | Theoretical and experimental analysis of the toughening behavior of whisker reinforcement in ceramic matrix composites | Becher P.F.; Becher P.F.; Hsueh C.H.; Angelini P.; Tiegs T.N.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
83 | 1989 | Erratum: Thermal Expansion Coefficients of Unidirectional Fiber-Reinforced Ceramics (Journal of the American Ceramic Society (1988) 71:10 (9c438-9c441)) | Hsueh, C.-H.; Becher, P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
84 | 1989 | Analytical analyses of stress transfer in fibre-reinforced composites with bonded and debonded fibre ends | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
85 | 1989 | Effects of Aspect Ratios of Ellipsoidal Inclusions on Elastic Stress Transfer of Ceramic Composites | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
86 | 1989 | Some considerations of evaluation of interfacial frictional stress from the indentation technique for fibre-reinforced ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
87 | 1989 | Elastic stress transfer from fiber to coating in a fiber-coating system | Hsueh C.-H.; Lu M.-C.; CHUN-HWAY HSUEH | Materials Science and Engineering A | | | |
88 | 1989 | Stress-displacement relation of fiber for fiber-reinforced ceramic composites during (indentation) loading and unloading | Hsueh C.-H.; Ferber M.K.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Research | | | |
89 | 1988 | Comment on ?§Sintering with Rigid Inclusions?? | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
90 | 1988 | Thermal Expansion Coefficients of Unidirectional Fiber?Reinforced Ceramics | Hsueh C.?H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
91 | 1988 | Residual stress and strain in pyrolytic boron nitride resulting from thermal anisotropy | Naito N.; Hsueh C.H.; CHUN-HWAY HSUEH | Journal of Materials Science | | | |
92 | 1988 | Toughening Behavior in Whisker?Reinforced Ceramic Matrix Composites | BECHER P.F.; HSUEH C.?H.; ANGELINI P.; TIEGS T.N.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
93 | 1988 | Analytical Evaluation of Interfacial Shear Strength for Fiber?Reinforced Ceramic Composites | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
94 | 1988 | Evaluation of Bridging Stress from R?Curve Behavior for Nontransforming Ceramics | Hsueh C.?H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
95 | 1988 | Sintering of Whisker?Reinforced Ceramics and Glasses | Hsueh, C.?H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
96 | 1988 | Effects of Interfacial Films on Thermal Stresses in Whisker?Reinforced Ceramics | HSUEH C.?H.; BECHER P.F.; ANGELINI P.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
97 | 1988 | Elastic load transfer from partially embedded axially loaded fibre to matrix | CHUN-HWAY HSUEH | Journal of Materials Science Letters | | | |
98 | 1988 | Some Considerations of Nonideal Transformation?Zone Profile | HSUEH C.?H.; BECHER P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
99 | 1987 | Liquid?Phase Sintering of Ceramics | MARION, J.E.; HSUEH, C.H.; EVANS, A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
100 | 1987 | High?Temperature Stress Corrosion Cracking in Ceramics | CAO, H.C.; DALGLEISH, B.J.; HSUEH, C.?H.; EVANS, A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
101 | 1986 | Creep During Sintering of Porous Compacts | RAHAMAN M.N.; DE JONGHE L.C.; HSUEH C.H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
102 | 1986 | Mathematical Model of Viscosity Measurements for Viscoelastic Solids | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
103 | 1986 | Transient stresses in bimodal compacts during sintering | De Jonghe, L.C.; Rahaman, M.N.; Hsueh, C.H.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
104 | 1986 | Sintering behaviour of powder compacts with multiheterogeneities | CHUN-HWAY HSUEH | Journal of Materials Science | | | |
105 | 1986 | Influence of Multiple Heterogeneities on Sintering Rates | Hsueh, C.?H.; Evans, A.G.; Mcmeeking, R.M.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
106 | 1986 | Behavior of Large Pores During Sintering and Hot Isostatic Pressing | EVANS, A.G.; HSUEH, C.H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
107 | 1986 | Viscoelastic stresses and sintering damage in heterogeneous powder compacts | Hsueh, C.H.; Evans, A.G.; Cannon, R.M.; Brook, R.J.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
108 | 1985 | Sintering of a ceramic film on a rigid substrate | CHUN-HWAY HSUEH | Scripta Metallurgica | | | |
109 | 1985 | Residual Stresses and Cracking in Metal/Ceramic Systems for Microelectronics Packaging | HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
110 | 1985 | Residual Stresses in Meta/Ceramic Bonded Strips | HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
111 | 1985 | Fatigue crack propagation in oil environments- II. A model for crack closure induced by viscous fluids | Tzou, J.-L.; Hsueh, C.H.; Evans, A.G.; Ritchie, R.O.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
112 | 1985 | Effects of heterogeneity shape on sintering induced stresses | CHUN-HWAY HSUEH | Scripta Metallurgica | | | |
113 | 1984 | Particle Rotation in Early Sintering | HSUEH C.?H.; DE JONGHE L.C.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
114 | 1983 | Experimental Assessment of Pore Breakaway During Sintering | SAKARCAN M.; HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | | | |
115 | 1983 | Oxidation induced stresses and some effects on the behavior of oxide films | Hsueh C.H.; Evans A.G.; CHUN-HWAY HSUEH | Journal of Applied Physics | | | |
116 | 1983 | Microstructure evolution during sintering: The role of evaporation/condensation | Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
117 | 1983 | A damage model of creep crack growth in polycrystals | Thouless, M.D.; Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
118 | 1982 | Microstructure development during final/intermediate stage sintering-I. Pore/grain boundary separation | Hsueh, C.H.; Evans, A.G.; Coble, R.L.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |
119 | 1981 | Overview 14 Creep fracture in ceramic polycrystals-II. effects of inhomogeneity on creep rupture | Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | | | |