第 1 到 107 筆結果,共 107 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2024 | Reaction Wheel Design for Precise Attitude Control of CubeSats Using Flexible PCB Windings and Halbach Magnet Array | Liu, Nai Wen; Hung, Kuo Yuan; Lyu, Bo Ting; SHIH-CHIN YANG ; Lin, Ying Po; Yu Chan, Chen | IEEE Transactions on Aerospace and Electronic Systems | |||
2 | 2023 | Torque Measurement and Control for Electric-Assisted Bike Considering Different External Load Conditions | Ho, Ping Jui; Yi, Chen Pei; Lin, Yi Jen; Chung, Wei Der; Chou, Po Huan; SHIH-CHIN YANG | Sensors | 1 | 1 | |
3 | 2023 | Novel Four-Phase Spherical Reaction Wheel Motor with Vector Control for Three-DOF CubeSat Attitude Determination and Control System | Lyu, Bo Ting; Lin, Yi Jen; SHIH-CHIN YANG ; Sie, Bo Huang; Chung, Wei Der | IECON Proceedings (Industrial Electronics Conference) | |||
4 | 2023 | Adaptive Disturbance Input Decoupling for Galvo Motor based on Resonance Frequency Estimation | Lin, Yi Jen; Chou, Po Huan; SHIH-CHIN YANG | 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023 | |||
5 | 2023 | Design of Dual-Three-Phase Synchronous Reluctance Starter Generator for Aircraft | Hung, Kuo Yuan; Liu, Nai Wen; SHIH-CHIN YANG | 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023 | |||
6 | 2023 | Ultra-Light Reaction Wheel with Dual-layer rotor and Single-side Halbach Magnet Array for CubeSat | Liu, Nai Wen; Hung, Kuo Yuan; Lyu, Bo Ting; SHIH-CHIN YANG | 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023 | |||
7 | 2023 | A CUSUM-based adaptive bearing fault features tracking method for RUL estimation | Yi, Chen Pei; Lin, Yi Jen; Ho, Ping Jui; Chung, Wei Der; Chou, Po Huan; SHIH-CHIN YANG | 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023 | |||
8 | 2023 | Motor Torque Control of Electric Assist Bike Considering External Resistances | Ho, Ping Jui; Yi, Chen Pei; Lin, Yi Jen; Chung, Wei Der; Chou, Po Huan; Sie, Bo Huang; SHIH-CHIN YANG | IECON Proceedings (Industrial Electronics Conference) | |||
9 | 2022 | Integration of Measurement Vector Insertion With Discontinuous PWM to Improve Saliency-Based Sensorless Drive Position Estimation | Chen, Jyun You; Hung, Kuo Yuan; Chen, Guan Ren; SHIH-CHIN YANG | IEEE Transactions on Power Electronics | 3 | 1 | |
10 | 2022 | Uniform and Localized Magnet Demagnetization Detection of Permanent Magnet Motor based on On-line Flux Estimation | Yi, Chen Pei; Ho, Ping Jui; Liu, Chia Jung; Lee, Feng Chi; SHIH-CHIN YANG | 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 | 0 | 0 | |
11 | 2022 | RC Filter Free Flux-based Sensorless BLDC Drive for Permanent Magnet Motor using Pulse Amplitude Modulation | Song, Ik Tiat; Huang, Ching Lon; Chen, Yi En; SHIH-CHIN YANG | 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 | 0 | 0 | |
12 | 2022 | Sensorless Disturbance Rejection for High-Precision Permanent Magnet Motor Motion System | Lin, Yi Jen; Chou, Po Huan; Hsu, Wei Chieh; Wu, Chi Jun; SHIH-CHIN YANG | 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 | 0 | 0 | |
13 | 2022 | Design of Satellite Reaction Wheel with Flexible PCB Windings for Angular Momentum Optimization | Liu, Nai Wen; Hung, Kuo Yuan; Lin, Yi Jen; SHIH-CHIN YANG | 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 | 0 | 0 | |
14 | 2022 | High-Resolution Permanent Magnet Drive Using Separated Observers for Acceleration Estimation and Control | Lin Y.-J; Chou P.-H; Yang S.-C.; SHIH-CHIN YANG | Sensors | |||
15 | 2021 | Disturbance Rejection of the Galvano Scanner System using Sensorless Acceleration Control and Disturbance Torque Compensation | Lin Y.-J; Chou P.-H; Wu C.-J; SHIH-CHIN YANG | 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021 | 0 | 0 | |
16 | 2021 | Transient Hall Sensor Fault Compensation for Hall-Based Field Oriented Control Motor Drive | Lin H.-C; Chen J.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG | 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings | |||
17 | 2021 | Torque Ripple Reduction for BLDC Permanent Magnet Motor Drive using DC-link Voltage and Current Modulation | Huang C.-L; SHIH-CHIN YANG | 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021 | 3 | 0 | |
18 | 2021 | Saliency-Based Sensorless Drive Using the Measurement Vector Insertion for PWM Voltage Injection | Chen J.-Y; Huang C.-L; Hung K.-Y; SHIH-CHIN YANG | 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021 | 1 | 0 | |
19 | 2021 | Sensorless Acceleration Estimation and Acceleration Feedback Control to Improve the Disturbance Torque Rejection on Galvano Motor System | Lin Y.-J; Chou P.-H; Wu C.-J; Yang S.-C.; SHIH-CHIN YANG | 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings | |||
20 | 2021 | Saliency-Based Permanent Magnet Machine Position Sensorless Drive Using Proposed PWM Injection and Shunt-Based Current Sensing for Position Estimation | Chen J.-Y; Yang S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
21 | 2021 | Sensorless lc filter implementation for permanent magnet machine drive using observer-based voltage and current estimation | Liang C.-M; Lin Y.-J; Chen J.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG | Sensors | 3 | ||
22 | 2020 | Model Reference Adaptive Control of Pulse Amplitude Modulated PM Motor Drive for High Power Transport Drone Applications | Huang C.-L; Wu C.-J; Yang S.-C.; SHIH-CHIN YANG | ECCE 2020 - IEEE Energy Conversion Congress and Exposition | |||
23 | 2020 | Phase voltage measurement for permanent magnet machine sensorless drive using controller capture modulator | Chen, G.-R.; Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
24 | 2020 | Design of high-speed permanent magnet motor considering rotor radial force and motor losses | Liu N.-W; Hung K.-Y; Yang S.-C; Lee F.-C; Liu C.-J.; SHIH-CHIN YANG | Energies | |||
25 | 2020 | 無人機馬達幅值調變低取樣頻率之無感測器適應性控制開發 | 黃靖倫; 楊士進; 張鈞傑; 林奕任; 陳俊佑; 周柏寰; 楊士進 | 機械工業雜誌 | |||
26 | 2020 | 極高速永磁同步電動機效率優化與設計 | 張正敏; 楊士進; 周柏寰; 洪國原; 劉乃文; 吳奇軍; 楊士進 | 機械工業雜誌 | |||
27 | 2020 | Permanent-magnet machine flux and torque response under the influence of turn fault | Hsu, C.-C.; Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
28 | 2020 | Full-Region Sensorless BLDC Drive for Permanent Magnet Motor using Pulse Amplitude Modulation with DC Current Sensing | Huang C; Wu C; Yang S.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
29 | 2020 | Saliency-Based Position Sensorless Drive for Permanent Magnet Machine with Low Cost Shunt Resistor Current Sensing using Modified PWM Voltage Injection | Chen J.-Y; Hung K.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG | ECCE 2020 - IEEE Energy Conversion Congress and Exposition | |||
30 | 2020 | Sensorless Vibration Harmonic Estimation of Servo System Based on the Disturbance Torque Observer | Huang C.-L; Yang S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
31 | 2020 | Permanent magnet motor design for satellite attitude control with high torque density and low torque ripple | Chou P.-H; Yang S.-C; Jhong C.-J; Huang J.-I; Chen J.-Y.; SHIH-CHIN YANG | IEEE Access | |||
32 | 2019 | High speed permanent magnet synchronous machine drive under insufficient sample frequency | Chen, W.-C.; Yang, S.-C.; Chou, P.-H.; Hsu, Y.-L.; Chen, J.-Y.; Chen, G.-R.; Chen, C.-S.; SHIH-CHIN YANG | 2019 IEEE International Electric Machines and Drives Conference | |||
33 | 2019 | Analysis of Saliency-Based Position Estimation for Permanent Magnet Machine with Saturation Reflected Non-Sinusoidal Inductance | Hung, K.-Y.; Liu, N.-W.; Yang, S.-C.; SHIH-CHIN YANG | 2019 IEEE 4th International Future Energy Electronics Conference, IFEEC 2019 | 0 | ||
34 | 2019 | Current Sensing Issues on Saliency-Based Position Sensorless Drive for Permanent Magnet Machine with PWM Voltage Injection | Chen, J.-Y.; Yang, S.-C.; Chen, G.-R.; SHIH-CHIN YANG | IECON Proceedings (Industrial Electronics Conference) | |||
35 | 2019 | Sensorless Vibration Frequency Estimation of Servo Drive System based on the Disturbance Torque Estimation | C.-L. Huang; S.-C. Yang; SHIH-CHIN YANG | IEEE Transaction on Industrial Electronics | |||
36 | 2019 | High-Precision Permaent Magent Motor Design for Satellite Attitude Control with High Torque Density and Low Torque Ripple | Chou, P.-H.; Yang, S.-C.; Jhong, C.-J.; Huang, J.-I.; Chen, J.-Y.; SHIH-CHIN YANG | IECON Proceedings (Industrial Electronics Conference) | |||
37 | 2019 | Comparison of High Speed Permanent Magnet Machine Sensorless Drive using Trapezoidal BLDC and Sinusoidal FOC under Insufficient PWM Frequency | Huang, C.-L.; Chen, G.-R.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG | 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019 | |||
38 | 2019 | 內藏式永磁同步馬達定力矩與定功率控制之開發 | 許煜亮; 周柏寰; 楊士進; 陳俊佑; 劉乃文; 楊士進 | 機械工業雜誌 | |||
39 | 2019 | 永磁同步電動機定子開路故障即時監測 | 周柏寰; 楊士進; 許煜亮; 洪國原; 陳冠任; 楊士進 | 機械工業雜誌 | |||
40 | 2019 | Implementation Issues of Flux Linkage Estimation on Permanent Magnet Machine Position Sensorless Drive at Low Speed | Chen, G.-R.; Chen, J.-Y.; Yang, S.-C.; SHIH-CHIN YANG | IEEE Access | |||
41 | 2019 | Implementation of low inductance permanent magnet machine drive with LC filter for field oriented control | Hsu, C.-C.; Yang, S.-C.; Chen, J.-Y.; SHIH-CHIN YANG | 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019 | |||
42 | 2019 | Advantages of Flux-based Position Sensorless Drive for Surface Permanent Magnet Machine | Chen, G.-R.; Yang, S.-C.; Chen, J.-Y.; SHIH-CHIN YANG | IECON Proceedings (Industrial Electronics Conference) | |||
43 | 2019 | Digital Implementation Issues on High Speed Permanent Magnet Machine FOC Drive under Insufficient Sample Frequency | Yang, S.-C.; Hsu, Y.-L.; Chou, P.-H.; Chen, J.-Y.; Chen, G.-R.; SHIH-CHIN YANG | IEEE Access | |||
44 | 2018 | Fault Detection and Tolerant Capability of Parallel-Connected Permanent Magnet Machines under Stator Turn Fault | Yang S.-C.; Hsu Y.-L.; Chou P.-H.; Hsu C.-C.; Chen G.-R.; Kang LI ; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | 9 | 8 | |
45 | 2018 | Automatic sport activity classification using deep learning and wearable inertial sensors | Y.-L. Hsu; S.-C. Yang; H.-C. Chang; S.-L. Lin; P.-H. Chou; Y.-J. Chiu; C.-C. Lin; H.-R. Lee; SHIH-CHIN YANG | 4th IEEE International Conference on Applied System Innovation 2018 (IEEE ICASI 2018) | |||
46 | 2018 | Development of an inertial-sensing-based robotic arm control system | Y.-L. Hsu; P.-H. Chou; H.-R. Lee; S.-C. Yang; H.-C. Chang; W.-L. Lee; G.-T. Chen; SHIH-CHIN YANG | 4th IEEE International Conference on Applied System Innovation 2018 (IEEE ICASI 2018) | |||
47 | 2018 | Human Daily and Sport Activity Recognition Using a Wearable Inertial Sensor Network | Hsu, Y.-L.; Yang, S.-C.; Chang, H.-C.; Lai, H.-C.; SHIH-CHIN YANG | IEEE Access | |||
48 | 2018 | Permanet Magnet Machine Electromagnetic Response and Tolerant Design to Stator Turn Fault | C.-C. Hsu; S.-C. Yang; SHIH-CHIN YANG | IECON 2018 - 44st Annual Conference of the IEEE Industrial Electronics Society | |||
49 | 2018 | Vibration measurement and suppression for laser galvanometers using a micro-electromechanical system-based accelerometer | Chou, P.-H.; Hsu, Y.-L.; Yang, S.-C.; Chang, H.-C.; Kuo, Y.-C.; Chiu, L.-F.; Chen, Y.-T.; SHIH-CHIN YANG | Sensors and Materials | |||
50 | 2018 | Tolerant design and electromagnetic response of permanent magnet machine with stator turn fault | Hsu, C.-C.; Yang, S.-C.; SHIH-CHIN YANG | 44th Annual Conference of the IEEE Industrial Electronics Society | |||
51 | 2018 | Sensorless Harmonic Estimation for Servo Drive with Vibration Load | Huang, C.-L.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG | 2018 IEEE Energy Conversion Congress and Exposition | |||
52 | 2018 | Comparative evaluation of a permanent magnet machine saliency-based drive with sine-wave and square-wave voltage injection | Chen, J.-Y.; Yang, S.-C.; Tu, K.-H.; SHIH-CHIN YANG | Energies | |||
53 | 2018 | Online Open-Phase Fault Detection for Permanent Magnet Machines With Low Fault Harmonic Magnitudes | Yang, S.-C.; Hsu, Y.-L.; Chou, P.-H.; Chen, G.-R.; Jian, D.-R.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
54 | 2018 | Integration of Capture Based Phase Voltage Measurement for Surface Permanent Magnet Machine Position Sensorless Drive | Chen, G.-R.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG | 2018 IEEE Energy Conversion Congress and Exposition | |||
55 | 2018 | EMF-based position sensorless drive with the instantaneous phase voltage measurement | G.-R. Chen; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG | the 10th Annual 2018 IEEE Energy Conversion Congress and Exposition (ECCE) | |||
56 | 2018 | Permanent magnet machine position sensorless drive at low speed with phase voltage measurement | Yang, S.-C.; Chen, G.-R.; Tu, K.-H.; SHIH-CHIN YANG | 44th Annual Conference of the IEEE Industrial Electronics Society | |||
57 | 2018 | Sensorless Harmonic Estimation for Servo Drive System with Vibrational Load | C.-L. Huang; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG | the 10th Annual 2018 IEEE Energy Conversion Congress and Exposition (ECCE) | |||
58 | 2018 | Advantage of Permanent Magnet Machine Position Sensorless Drive with Phase Voltage Measurement | S.-C. Yang; G.-R. Chen; T.-K. Tu; SHIH-CHIN YANG | IECON 2018 - 44st Annual Conference of the IEEE Industrial Electronics Society | |||
59 | 2018 | Advantages of Winding Fault Tolerant Capability on Permanent Magnet Machines with Two Neutral Points in Stator Windings | S.-C. Yang; Y.-L. Hsu; P.-H. Chou; C.-X. Liu; G.-R. Chen; K. Li; SHIH-CHIN YANG | IEEE Transaction on Industry Applications | |||
60 | 2017 | Position estimation capability on saliency-based sensorless drive of permanent magnet machine using different injection signals | Yang, S.-C.; Yang, S.-M.; You, Z.-C.; Tsai, Y.-Y.; SHIH-CHIN YANG ; YAO-YANG TSAI | 2017 IEEE International Electric Machines and Drives Conference | 1 | 0 | |
61 | 2017 | Development of a smart home system based on multi-sensor data fusion technology | Chou, P.-H.; Hsu, Y.-L.; Lee, W.-L.; Kuo, Y.-C.; Chang, C.-C.; Cheng, Y.-S.; Chang, H.-C.; Lin, S.-L.; Yang, S.-C.; Lee, H.-H.; SHIH-CHIN YANG | 2017 IEEE International Conference on Applied System Innovation: Applied System Innovation for Modern Technology | |||
62 | 2017 | Fault Detection and Tolerant Capability of Permanent Magnet Machines with Two Neutral Points | S.-C. Yang; Y.-L. Hsu; P.-H. Chou; C.-X. Liu; G.-R. Chen; K. Li; SHIH-CHIN YANG | the 9th Annual 2017 IEEE Energy Conversion Congress and Exposition (ECCE) | |||
63 | 2017 | On-Line Stator Open-Phase Fault Detection and Tolerant Control for Permanent Magnet Machines Using the Neutral Point Voltage | Yang, S.-C.; Chen, G.-R.; Jian, D.-R.; SHIH-CHIN YANG | IEEE Access | |||
64 | 2017 | Application of nonparametric weighted feature extraction for an inertial-signal-based human activity recognition system | Hsu, Y.-L.; Lin, S.-L.; Chou, P.-H.; Lai, H.-C.; Chang, H.-C.; Yang, S.-C.; SHIH-CHIN YANG | 2017 IEEE International Conference on Applied System Innovation: Applied System Innovation for Modern Technology | |||
65 | 2017 | 雷射振鏡馬達振動分析及除振技術之研究 | 周柏寰; 許煜亮; 張興政; 楊士進; 陳昱態; 朱玉鳳; 楊士進 | 機械工業雜誌 | |||
66 | 2017 | Position sensing of permanent magnet machine position sensorless drive at high speed with low sample over rotor operating frequency ratio | Chen G.-R.; Yang S.-C.; Kang LI ; SHIH-CHIN YANG | 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia | 1 | 0 | |
67 | 2017 | Fault detection and tolerant capability of parallel connected permanent magnet machines under stator turn fault | Yang S.-C.; Hsu Y.-L.; Chou P.-H.; Liu C.-X.; Chen G.-R.; Kang LI ; SHIH-CHIN YANG | 2017 IEEE Energy Conversion Congress and Exposition | 1 | 0 | |
68 | 2017 | Position and speed estimation of permanent magnet machine sensorless drive at high speed using an improved phase-locked loop | Chen G.-R.; Yang S.-C.; Hsu Y.-L.; Kang LI ; SHIH-CHIN YANG | Energies | 17 | 16 | |
69 | 2017 | Development of the vibration analysis and suppression technology for laser galvanometers based on inertial sensing technology | Chen, W.-C.; Hsu, Y.-L.; Chou, P.-H.; Lee, H.-H.; Chang, H.-C.; Yang, S.-C.; Chen, C.-S.; SHIH-CHIN YANG | 2017 SICE International Symposium on Control Systems | |||
70 | 2017 | Design of a High Starting Torque Single-Phase DC-Excited Flux Switching Machine | You, Z.-C.; Yang, S.-M.; Yu, C.-W.; Lee, Y.-H.; Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
71 | 2017 | High-Speed Position-Sensorless Drive of Permanent-Magnet Machine Using Discrete-Time EMF Estimation | Yang, S.-C.; Chen, G.-R.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
72 | 2017 | Full Speed Region Sensorless Drive of Permanent-Magnet Machine Combining Saliency-Based and Back-EMF-Based Drive | Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
73 | 2017 | Design and implementation of a smart home system using multisensor data fusion technology | Hsu, Y.-L.; Chou, P.-H.; Chang, H.-C.; Lin, S.-L.; Yang, S.-C.; Su, H.-Y.; Chang, C.-C.; Cheng, Y.-S.; Kuo, Y.-C.; SHIH-CHIN YANG | Sensors (Switzerland) | |||
74 | 2017 | Comparison of open-Phase fault detection for permanent magnet machine drives using different fault signals | Yang, S.-C.; Hsu, Y.-L.; Chou, P.-H.; Jian, D.-R.; Chen, G.-R.; SHIH-CHIN YANG | 2017 IEEE Energy Conversion Congress and Exposition | |||
75 | 2017 | Design Consideration on the Square-Wave Voltage Injection for Sensorless Drive of Interior Permanent-Magnet Machines | Yang, S.-C.; Yang, S.-M.; Hu, J.-H.; SHIH-CHIN YANG | IEEE Transactions on Industrial Electronics | |||
76 | 2017 | Robust initial position estimation of permanent magnet machine with low saliency ratio | Yang, S.-C.; Yang, S.-M.; Hu, J.-H.; SHIH-CHIN YANG | IEEE Access | |||
77 | 2017 | Vibration Measurement and Suppression for Laser Galvanometers Using a Mems-Based Accelerometer | Y.-L. Hsu; S.-C. Yang; P.-H. Chou; H.-C. Chang; Y.-C. Kuo; L.-F. Chiu; SHIH-CHIN YANG | the 3rd International Conference on Inventions (ICI) | |||
78 | 2016 | Online Turn Fault Detection of Interior Permanent-Magnet Machines Using the Pulsating-Type Voltage Injection | Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
79 | 2016 | Design issues for permanent magnet machine sensorless drive combining saliency-based and back-EMF-based control in the entire speed range | Yang, S.-C.; Hsu, Y.-L.; Chen, G.-R.; SHIH-CHIN YANG | Proceedings of the IEEE International Conference on Industrial Technology | |||
80 | 2016 | Design Consideration of Interior Permanent Magnet Machine Sensorless Drive using Square-Wave Voltage Injection | S.-C. Yang; S.-M. Yang; J.-H. Hu; SHIH-CHIN YANG | The 8th IEEE Energy Conversion Congress and Exposition | |||
81 | 2016 | A wearable inertial measurement system with complementary filter for gait analysis of patients with stroke or Parkinson's disease | Chang, H.-C.; Hsu, Y.-L.; Yang, S.-C.; Lin, J.-C.; Wu, Z.-H.; SHIH-CHIN YANG | IEEE Access | |||
82 | 2016 | Online stator turn fault detection for inverter-fed electric machines using neutral point voltages difference | Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
83 | 2016 | Design consideration of interior permanent magnet machine position sensorless drive using square-wave voltage injection | Yang, S.-C.; Yang, S.-M.; Hu, J.-H.; SHIH-CHIN YANG | IEEE Energy Conversion Congress and Exposition | |||
84 | 2016 | High speed operation of permanent magnet machine position sensorless drive using discretized EMF estimator | Yang, S.-C.; Chen, G.-R.; SHIH-CHIN YANG | IEEE Energy Conversion Congress and Exposition | |||
85 | 2015 | On-Line Turn Fault Detection of Interior Permanent Magnet Machines Using the Pulsating-Type Voltage Injection | Yang, S.-C.; SHIH-CHIN YANG | 2015 IEEE Energy Conversion Congress and Exposition | |||
86 | 2015 | Performance evaluation of stator winding fault detection in the inverter-fed permanent magnet machine using high frequency voltage injection | Yang, S.-C.; SHIH-CHIN YANG | 41st Annual Conference of the IEEE Industrial Electronics Society | |||
87 | 2015 | Saliency-Based Position Estimation of Permanent Magnet Synchronous Machines using Square-Wave Voltage Injection, IEEE Transactions on Industry Applications | S.-C. Yang; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
88 | 2015 | On-line stator turn fault detection for inverter-fed electric machines using neutral point voltage differences | Yang, S.-C.; SHIH-CHIN YANG | 2015 IEEE 2nd International Future Energy Electronics Conference | |||
89 | 2015 | Saliency-Based Position Estimation of Permanent-Magnet Synchronous Machines Using Square-Wave Voltage Injection With a Single Current Sensor | Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
90 | 2014 | Initial rotor position estimation of permanent magnet synchronous machines using square-wave voltage injection with a single current sensor | Yang, S.-C.; SHIH-CHIN YANG | IEEE Applied Power Electronics Conference and Exposition | |||
91 | 2012 | Analysis of iron and magnet losses in surface-permanent-magnet machines resulting from injection-based self-sensing position estimation | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
92 | 2012 | Surface permanent magnet synchronous machine position estimation at low speed using eddy-current-reflected asymmetric resistance | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEE Transactions on Power Electronics | |||
93 | 2012 | Comparison of Resistance-Based and Inductance-Based Self-Sensing Control for Surface Permanent Magnet Machine Using High Frequency Signal Injection | S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
94 | 2012 | Comparison of resistance-based and inductance-based self-sensing controls for surface permanent-magnet machines using high-frequency signal injection | Yang, S.-C.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | 52 | 35 | |
95 | 2012 | Surface permanent-magnet machine self-sensing at zero and low speeds using improved observer for position, velocity, and disturbance torque estimation | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
96 | 2012 | Analysis of Iron and Magnet Losses in SPM Machine Resulting From Injection-based Self-Sensing Position Estimation | S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
97 | 2012 | SPM Machine Self-Sensing Position Estimation at Low Speed using Eddy Current Reflected Asymmetric Resistance | S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG | IEEE Transactions on Power Electronics | |||
98 | 2012 | SPM Machine Self-Sensing using Improved Observer for Position, Velocity and Disturbance Torque Estimation | S.-C. Yang; R.D. Lorenz; SHIH-CHIN YANG | IEEE Transaction on Industry Applications | |||
99 | 2012 | Concurrent designs of surface permanent magnet machines for self-sensing position estimation and power-conversion | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEJ Journal of Industry Applications | |||
100 | 2011 | Surface-permanent-magnet synchronous machine design for saliency-tracking self-sensing position estimation at zero and low speeds | Yang, S.-C.; Suzuki, T.; Lorenz, R.D.; Jahns, T.M.; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
101 | 2011 | Analysis of iron and magnet losses in surface permanent magnet machines resulting from injection-based self-sensing position estimation | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future | |||
102 | 2011 | Comparison of resistance-based and inductance-based self-sensing control for surface permanent magnet machine using high frequency signal injection | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future | |||
103 | 2011 | SPM Machine Design for Saliency-Tracking Self-Sensing Position Estimation at Zero and Low Speeds | S.-C. Yang; T. Suzuki; R.D. Lorenz; T.M. Jahns; SHIH-CHIN YANG | IEEE Transactions on Industry Applications | |||
104 | 2011 | Surface permanent magnet machine self-sensing at zero and low speeds using improved observer for position, velocity, and disturbance torque estimation | Yang, S.-C.; Lorenz, R.D.; SHIH-CHIN YANG | 2011 IEEE International Electric Machines and Drives Conference | |||
105 | 2010 | Employing complementary split-ring resonators for the wide stopband microstrip lowpass filter design | Tang, Ching-Wen; Yang, Shih-Chin; SHIH-CHIN YANG | Microwave and Optical Technology Letters | |||
106 | 2010 | Surface permanent magnet synchronous machine design for saliency-tracking self-sensing position estimation at zero and low speeds | Yang, S.-C.; Suzuki, T.; Lorenz, R.D.; Jahns, T.M.; SHIH-CHIN YANG | 2010 IEEE Energy Conversion Congress and Exposition | |||
107 | 2007 | Design and control optimization of surface-mounted permanent-magnet machines with high torque and low ripples | Yang, S.-C.; Yang, Y.-P.; SHIH-CHIN YANG | IECON Proceedings (Industrial Electronics Conference) | 2 | 0 |