第 1 到 260 筆結果,共 260 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2023 | Damage Monitoring of Composite Adhesive Joint Integrity Using Conductivity and Fiber Bragg Grating | CHOW-SHING SHIN ; Chen, Liang Wei | Polymers | 0 | 0 | |
2 | 2022 | Hygrothermal Damage Monitoring of Composite Adhesive Joint Using the Full Spectral Response of Fiber Bragg Grating Sensors | Shin C.-S; Lin T.-C.; CHOW-SHING SHIN | Polymers | |||
3 | 2021 | Design and evaluation of a 3D multi-manifold micromixer realized by a double-Archimedes-screw for rapid mixing within a short distance | Shin C.-S; Baldeck P.L; Nie Y.-M; Lee Y.-H; Lin Z.-D; Chiang C.-C; Lin C.-L.; CHOW-SHING SHIN | Journal of the Taiwan Institute of Chemical Engineers | |||
4 | 2021 | Adhesive joint integrity monitoring using the full spectral response of fiber bragg grating sensors | Shin C.-S; Lin T.-C.; CHOW-SHING SHIN | Polymers | |||
5 | 2021 | Fabrication and compressive behavior of a micro?lattice composite by high resolution dlp stereolithography | Shin C.S; Chang Y.C.; CHOW-SHING SHIN | Polymers | |||
6 | 2019 | Multiple Parameters Optical Sensing Using Fiber Ring Laser Based on Fiber Bragg Gratings and 1064 nm Semiconductor Optical Amplifier | Liaw, S.-K.; Li, D.-C.; Lee, H.-C.; Huang, Y.-Z.; Shin, C.-S.; Lee, Y.-W.; CHOW-SHING SHIN | Optics and Spectroscopy | |||
7 | 2019 | An improved impact source locating system using FBG Rosette Array | Chen, B.-L.; CHOW-SHING SHIN | Sensors (Switzerland) | |||
8 | 2018 | Alleviating distortion and improving the young's modulus in two-photon polymerization fabrications | Shin, C.-S.; Li, T.-J.; Lin, C.-L.; CHOW-SHING SHIN | Micromachines | |||
9 | 2017 | Monitoring fatigue damage of an adhesive joint using fiber optics sensors | Shin, C.S.; Yang, Y.J.; CHOW-SHING SHIN ; YAO-JOE YANG | Journal of Physics: Conference Series | 3 | 0 | |
10 | 2017 | The influence of heat treatment on cyclic fatigue and cutting efficiency of ProTaper Universal F2 instruments | Chih-Wen Chi; Eddie Hsiang-Hua Lai; Chao-Yuan Liu; Chun-Pin Lin; CHOW-SHING SHIN | Journal of Dental Sciences | |||
11 | 2017 | 製程參數對雙光子光致聚合微製造懸臂樑機械性質影響探討 | 單秋成 ; 黎子睿; 林志郎 | 中國機械工程學會第三十四屆全國學術研討會 | |||
12 | 2017 | Ultra low thermal coefficient broadband super-fluorescent fiber source with radiation insensitivity characteristic | Ting, Y.-C.; Wang, H.; Lu, T.-Y.; Lin, C.-J.; Liaw, S.-K.; Liu, R.-Y.; CHOW-SHING SHIN | 2017 International Workshop on Fiber Optics in Access Network | |||
13 | 2017 | Cyclic fatigue behavior of NiTi dental rotary files in clinical simulated root canal | Chih-Wen Chi; Chun-Chieh Lee; Chun-Pin Lin; CHOW-SHING SHIN | Journal of the Formosan Medical Association | |||
14 | 2017 | An energy modulating method for monitoring adhesive joint damage using fiber optics sensors | C S Shin; Y J Yang; S K Liaw; CHOW-SHING SHIN | 6th International Conference on Fracture, Fatigue and Wear FFW 2017 | |||
15 | 2017 | Cyclic fatigue behavior of nickel–titanium dental rotary files in clinical simulated root canals | Chi, C.-W.; Li, C.-C.; CHUN-PIN LIN ; CHOW-SHING SHIN | Journal of the Formosan Medical Association | 10 | 6 | |
16 | 2017 | Influence of heat treatment on cyclic fatigue and cutting efficiency of ProTaper Universal F2 instruments | Chi, C.-W.; EDDIE HSIANG HUA LAI ; Liu, C.-Y.; CHUN-PIN LIN ; CHOW-SHING SHIN | Journal of Dental Sciences | 13 | 7 | |
17 | 2016 | 銲接關鍵性劣化因子探討及檢查對策研究 | 沈育霖; 單秋成 | ||||
18 | 2016 | Pressurized line pipe wall thinning detection using a distributed fiber-optic sensing system | Shen, Y.-L.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
19 | 2016 | Tentative probes into some aspects of the pipeline rupture behind the 2014 Kaohsiung underground gas explosions | Shin, C.-S.; Jiang, H.-M.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
20 | 2016 | "光纖感測器在材料破壞偵測的應用”(Invited talk) | C S Shin; CHOW-SHING SHIN | 第十三屆破壞科學研討會 | |||
21 | 2016 | 銲接檢查技術手冊 | 沈育霖; 單秋成 | ||||
22 | 2015 | Laser direct writing 3D structures for microfluidic channels: Flow meter and mixer | CHOW-SHING SHIN | Progress in Biomedical Optics and Imaging - Proceedings of SPIE | 7 | 0 | |
23 | 2015 | Linear-Cavity Fiber Lasers Investigation and Application | S.-K. Liaw; CHOW-SHING SHIN | International Conference and Exhibition on Lasers, Optics & Photonics | |||
24 | 2015 | Laser direct writing 3D structuresfor microfluidic channels: flow meter and mixer | Chih-Lang Lin; Yi-Jui Liu; Zheng-Da Lin; Bo-Long Wu; Yi-Hsiung Lee; Chow-Shing Shin; Patrice L. Baldeck; CHOW-SHING SHIN | Microfluidics, BioMEMS, and Medical Microsystems | |||
25 | 2015 | A simple and direct reading flow meter fabricated by two-photon polymerization for microfluidic channel | Liu, Y.-J.; Yang, J.-Y.; Nie, Y.-M.; Lu, C.-H.; Huang, E.D.; Shin, C.-S.; Baldeck, P.; Lin, C.-L.; CHOW-SHING SHIN | Microfluidics and Nanofluidics | |||
26 | 2015 | Semiconductor-integrated-Fiber-Bragg-Gratings for Multi-parameter Network Sensing | S.-K. Liaw; CHOW-SHING SHIN | 3rd International Conference and Exhibition on Lasers, Optics & Photonics | |||
27 | 2015 | CARBON FIBER EPOXY ATHERMAL STRUCTURES FOR OPTICAL FIBER GRATING WAVELENGTH STABILIZATION | C S Shin; Yen-Chang Huang; Shien-Kuei Liaw; CHOW-SHING SHIN | 20th International Conference on Composite Materials | |||
28 | 2015 | 繩索垂降作業人員防護及安全技術研究 | 沈育霖; 單秋成 | ||||
29 | 2015 | 歐盟EN81-1與我國升降機規範之比較及妥適性探討 | 單秋成(Chiu-Cheng Shan); 沈育霖(Yu-Lin Shen); 趙子豪(Tzu-Hao Chao); 單秋成 | 勞動及職業安全衛生研究季刊 | |||
30 | 2014 | Post-impact fatigue damage monitoring using fiber bragg grating sensors | Shin, C.-S.; Liaw, S.-K.; Yang, S.-W.; CHOW-SHING SHIN | Sensors (Switzerland) | |||
31 | 2014 | Monitoring hygrothermal damage in graphite-epoxy laminate using fiber bragg grating | Tsai, P.K.; Shin, C.S.; Liaw, S.K.; CHOW-SHING SHIN | 16th European Conference on Composite Materials | |||
32 | 2014 | Tunable L-band fiber lasers using fiber bragg gratings and wavelength reflector | Liaw, S.-K.; Wu, W.-F.; CHOW-SHING SHIN | Microwave and Optical Technology Letters | |||
33 | 2014 | Monitoring the fatigue crack growth condition under a composite patch repair using fiber Bragg gratings | C S Shin; Yi-Chun Chen; CHOW-SHING SHIN | ECF20, 20th European Conference on Fracture | |||
34 | 2014 | Theoretical and experimental study of multifunction C+L band hybrid fiber amplifiers | Hsu, H.-Y.; Yu, Y.-L.; Liaw, S.-K.; Liu, R.-Y.; CHOW-SHING SHIN | Optics and Laser Technology | |||
35 | 2014 | An overview for recent development in tunable fiber lasers | Liaw, S.-K.; CHOW-SHING SHIN | 2014 International Symposium on Next-Generation Electronics | |||
36 | 2014 | 起重升降機具安全研究-無機房升降機 | 沈育霖; 單秋成 | ||||
37 | 2014 | Tunable fiber laser using fiber Bragg gratings integrated carbon fiber composite with large tuning range | Liaw S.-K.; CHOW-SHING SHIN ; WEN-FANG WU | Optics and Laser Technology | 20 | 19 | |
38 | 2013 | In-situ fatigue crack initiation monitoring in NiTi rotary endodontic instruments | Shin, C.S.; Liu, C.Y.; CHOW-SHING SHIN | Advanced Materials Research | 0 | 0 | |
39 | 2013 | A critical analysis on the cyclic fatigue testing of rotary endodontic instrument | CHOW-SHING SHIN ; Chang, Q.M.; CHUN-PIN LIN | Applied Mechanics and Materials | 0 | 0 | |
40 | 2013 | Frequency and temperature effects on fatigue of endodontic instruments | C. S. Shin; C. Y. Liu; C. P. Lin; CHOW-SHING SHIN | BMCE2013 | |||
41 | 2013 | Single-longitudinal-mode linear-cavity fiber laser using subring cavities and broadband fiber mirror | Wang, H.; Liaw, S.K.; Hsu, H.I.; Shin, C.S.; Liu, R.Y.; CHOW-SHING SHIN | IEEE International Symposium on Next-Generation Electronics 2013 | |||
42 | 2013 | Pump reflector based remote pumped bidirectional EDFA for WDM PON transport | Hong, S.-S.; Yu, Y.-L.; Liaw, S.-K.; CHOW-SHING SHIN | 2013 IEEE/CIC International Conference on Communications in China | |||
43 | 2013 | A Novel Fiber Bragg Grating Needle Pressure Sensor for Medical Applications | Shin, C. S.; Tseng, Y. T.; Liaw, S. K.; CHOW-SHING SHIN | Journal of Neuroscience and Neuroengineering | |||
44 | 2013 | Single Frequency Tunable Fiber Lasers for Optical Communications | S.K. Liaw; H. Wang; H. Y. Hsu; N. K. Chen; CHOW-SHING SHIN | 2013 2nd IEEE/CIC International Conference on Communications | |||
45 | 2013 | Optical-circulator-based single-frequency fiber laser using absorber and subring cavity in the linear cavity | Liaw, S.K.; Wang, H.; Hsu, H.I.; Shin, C.S.; Liu, R.Y.; CHOW-SHING SHIN | Progress in Electromagnetics Research Symposium | |||
46 | 2013 | Multifunction C+L band EDFA/RFA hybrid fiber amplifiers | Fan, C.-C.; Yu, Y.-L.; Liu, R.-Y.; Hsu, H.-Y.; Liaw, S.-K.; CHOW-SHING SHIN | 2013 IEEE 6th International Conference on Advanced Infocomm Technology | |||
47 | 2013 | WDM PON purpose remote pumped bidirectional EDFA using cascading FBGS as a pump reflector | Yu, Y.L.; Liaw, S.-K.; Liu, R.-Y.; CHOW-SHING SHIN | Microwave and Optical Technology Letters | |||
48 | 2012 | 複合材料貼片修補之智慧型結構完整性監測 | 單秋成 ; 陳怡君; 陳佩嫈 | 中國機械工程學會第二十九屆全國學術研討會 | |||
49 | 2012 | Integrity monitoring of composite patch repairs using fiber Bragg grating sensors | Shin, C.S.; Chen, Y.-C.; Chen, P.-Y.; CHOW-SHING SHIN | 15th European Conference on Composite Materials | |||
50 | 2012 | 以分佈式布里淵頻率漂移監測碳纖維複材受衝擊後內部損傷之應用 | 王楚葳; 單秋成 | 第十一屆破壞科學研討會 | |||
51 | 2012 | 應用光纖感測器及麥克風於鎳鈦旋轉器械疲勞破壞之監測 | 許仕均; 單秋成 | 第十一屆破壞科學研討會 | |||
52 | 2012 | 鎳鈦旋轉器械疲勞破壞之量化分析 | 劉昭沅; 單秋成 ; 林俊彬 | 第十一屆破壞科學研討會 | |||
53 | 2012 | 以光纖光柵感測器監測碳纖維複材經衝擊/疲勞破壞/貼片修補之缺陷發展 | 陳姵縈; 單秋成 | 第十一屆破壞科學研討會 | |||
54 | 2012 | Evaluating fatigue crack propagation properties using miniature specimens | Shin, C.-S.; Lin, S.-W.; Shin, Chow-Shing; Lin, Shi-Wei; CHOW-SHING SHIN | International Journal of Fatigue | |||
55 | 2012 | Application of fiber Bragg grating sensors in monitoring fatigue failure of NiTi rotary endodontic instruments | Liu, C.Y.; CHOW-SHING SHIN | Proceedings of SPIE - The International Society for Optical Engineering | |||
56 | 2012 | An impact source locating system using fiber Bragg grating rosette array | Shin, C.S.; Chen, B.L.; CHOW-SHING SHIN | Proceedings of SPIE - The International Society for Optical Engineering | |||
57 | 2012 | 以布拉格光纖光柵經複材貼片修補之金屬結構疲勞裂縫的發展 | 陳怡君; 單秋成 | 第十一屆破壞科學研討會 | |||
58 | 2012 | Linear-cavity fiber laser in nearly single-frequency operation using faraday rotator mirror | Liaw, S.K.; CHOW-SHING SHIN ; Wang, H.; Hsu, K.H.; Lin, S.C.; Chen, N.-K.; Shin, C.S.; Tver'yanovich, Y. | Laser Physics | 5 | 4 | |
59 | 2011 | A critique on evaluating fatigue crack propagation properties using miniature specimens | Shin, C.-S.; CHOW-SHING SHIN | Advanced Materials Research | 2 | 0 | |
60 | 2011 | Foreign object impact monitoring on wind turbine blade using FBGs | Shin, C.S.; Chen, B.L.; Liaw, S.K.; CHOW-SHING SHIN | Proceedings of IEEE Sensors | |||
61 | 2010 | Linear-cavity fiber laser using subring-cavity incorporated saturable absorber for single-frequency operation | Liaw, S.K.; CHOW-SHING SHIN ; Wang, S.; Shin, C.S.; Yu, Y.L.; Chen, N.K.; Hsu, K.C.; Manshina, A.; Tver'yanovich, Y. | Laser Physics | 13 | 11 | |
62 | 2010 | Impact response of a wind turbine blade measured by distributed FBG sensors | Shin, C.S.; Chen, B.L.; Cheng, J.R.; Liaw, S.K.; CHOW-SHING SHIN | Materials and Manufacturing Processes | |||
63 | 2010 | Effect of temper, specimen orientation and test temperature on the tensile and fatigue properties of SiC particles reinforced PM 6061 Al alloy | Shin, C.S.; Huang, J.C.; Shin, C.S.; Huang, J.C.; CHOW-SHING SHIN | International Journal of Fatigue | |||
64 | 2010 | An FBG-based impact event detection system for structural health monitoring | Shin, C.S.; Chen, B.L.; Liaw, S.K.; CHOW-SHING SHIN | Advances in Civil Engineering | |||
65 | 2010 | Single-longitudinal-mode linear-cavity fiber laser using multiple subring-cavities | Liaw, S.K.; Wang, S.; Shin, C.S.; Chen, N.K.; Hsu, K.C.; Manshina, A.; Tver'yanovich, Y.; Su, C.-F.; Wang, L.K.; CHOW-SHING SHIN | Laser Physics | |||
66 | 2010 | Using distributed Brillouin fiber sensor to detect the strain and cracks of steel structures | Chen, C.-H.; Shen, Y.-L.; CHOW-SHING SHIN | Journal of Mechanics | |||
67 | 2010 | Using a distributed brillouin fiber sensor to detect strain and cracks in steel structures | C.-H. Chen; Y. L. Shen; CHOW-SHING SHIN | Journal of Mechanics | |||
68 | 2010 | An FBG based impact event logging and locating system for structural health monitoring | C. S. Shin; B. L. Chen; S. K. Liaw; CHOW-SHING SHIN | Journal of Advances in Civil Engineering | |||
69 | 2010 | Effect of temper, specimen orientation and test temperature on the tensile and fatigue properties of SiC reinforced PM 6061 Al alloy | C.S. Shin; J.C. Huang; CHOW-SHING SHIN | International Journal of Fatigue | |||
70 | 2010 | The Rapid Brazing of Stainless Steel Wire and Low Carbon Steel Wire by Using of Ultra-high Frequency Induction Heating | C. Y. Huang; C. S. Shin; Y. C. Chen; CHOW-SHING SHIN | J. the Taiwan Society for Metal Heat Treatment | |||
71 | 2010 | Fiber bragg gratings array for structural health monitoring | Chen, B.L.; Shin, C.S.; Chen, B.L.; Shin, C.S.; CHOW-SHING SHIN | Materials and Manufacturing Processes | |||
72 | 2010 | An optical fiber-based curvature sensor for endodontic files inside a tooth root canal | Shin, Chow-Shing; Lin, Min-Wei; Shin, C.-S.; Lin, M.-W.; CHOW-SHING SHIN | IEEE Sensors Journal | |||
73 | 2009 | Investigation of material fatigue behavior through cyclic ball indentation testing | CHOW-SHING SHIN | ASTM Special Technical Publication | 6 | 0 | |
74 | 2009 | Distributed sensing floor for an intelligent environment | Shen, Y.-L.; CHOW-SHING SHIN | IEEE Sensors Journal | |||
75 | 2009 | A comparison of interrogation schemes for impact event monitoring using fiber Bragg gratings | Shin, C.S.; Chen, B.L.; CHOW-SHING SHIN | Proceedings of SPIE - The International Society for Optical Engineering | |||
76 | 2008 | 核能電廠閥桿受力量規之研發 | 單秋成 ; 黃寬明; 郭鴻達 | 臺電工程月刊 | |||
77 | 2008 | 內埋式光纖感測器研究(3/3) | 單秋成 | ||||
78 | 2008 | 內埋式光纖感測器研究(2/3) | 單秋成 | ||||
79 | 2008 | 利用微型平板試片進行疲勞裂縫延伸測試探討(2/2) | 單秋成 | ||||
80 | 2008 | Surface fatigue crack growth suppression in cylindrical rods by artificial infiltration | Shin, C.S.; Cai, C. Q.; ShinCS | International Journal of Fatigue | |||
81 | 2008 | 複合材料衝擊、扭轉及膠合破壞檢測技術之比較 | 單秋成 ; 何彥儒; 楊仕偉; 鄭錦榮 | 臺電工程月刊 | |||
82 | 2008 | Surface fatigue crack growth suppression in cylindrical rods by artificial infiltration | Shin, C.S.; Cai, C.Q.; CHOW-SHING SHIN | International Journal of Fatigue | |||
83 | 2008 | Investigation of material fatigue behavior through cyclic ball indentation testing | CHOW-SHING SHIN | Journal of ASTM International | |||
84 | 2008 | An impact events monitoring system for wind turbine blades | Shin, C.S.; Chen, B.L.; Cheng, J.R.; CHOW-SHING SHIN | Advanced Materials Research | |||
85 | 2008 | Fiber Bragg gratings array for structural health monitoring | Chen, B.L.; CHOW-SHING SHIN | Advanced Materials Research | |||
86 | 2008 | A dynamic strain measurement system using fiber grating sensors and its application in structural health monitoring | Shin, C.S.; Chen, B.L.; Chiang, C.C.; CHOW-SHING SHIN | World Forum on Smart Materials and Smart Structures Technology, SMSST'07 | |||
87 | 2007 | 牙科根管銼機械性質評估與斷裂防治 (新制多年期第1年) | 單秋成 | ||||
88 | 2007 | Evaluating fatigue crack propagation properties using a cylindrical rod specimen | 單秋成(CHOW-SHING SHIN) ; Cai, C. Q. | International Journal of Fatigue | |||
89 | 2007 | Evaluating fatigue crack propagation properties using a cylindrical rod specimen | Shin, C.S.; Cai, C.Q.; CHOW-SHING SHIN | International Journal of Fatigue | |||
90 | 2007 | C-band continuously tunable lasers using tunable fiber Bragg gratings | Liaw, S.K.; CHOW-SHING SHIN | Optics and Laser Technology | |||
91 | 2007 | Hydrogen-enhanced cracking of 2205 duplex stainless steel | Tsay, L.W.; Young, M.C.; Shin, C.-S.; Chan, S.L.I.; CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | |||
92 | 2007 | An evaluation of stress-strain property prediction by automated ball indentation (ABI) testing | R.V. Prakash; CHOW-SHING SHIN | JOURNAL OF TESTING AND EVALUATION | |||
93 | 2007 | The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds | Young, M.C.; Tsay, L.W.; Shin, C.-S.; Chan, S.L.I.; CHOW-SHING SHIN | International Journal of Fatigue | |||
94 | 2007 | Fiber-Optic Sensing System for In-Vivo Measurement of Biological Parameter | 單秋成 | ||||
95 | 2007 | Fiber-Optic Sensing System for Measuring Curvature | 單秋成 | ||||
96 | 2006 | Fatigue crack propagation properties from small sized rod specimens | Shin, C.S.; Cai, C. Q.; ShinCS | Nuclear Engineering and Design | |||
97 | 2006 | Fatigue damage monitoring in polymeric composites using multiple fiber bragg gratings | Shin, C.S.; Chiang, C.C.; ShinCS | International Journal of Fatigue | |||
98 | 2006 | Embedded Fibre Bragg Grating Sensors for Internal Fatigue Damage Monitoring in Polymeric Composites | 單秋成(CHOW-SHING SHIN) ; Chiang, C. C. | Key Engineering Materials | |||
99 | 2006 | Fatigue crack propagation properties from small sized rod specimens | Cai, C. Q.; 單秋成(CHOW-SHING SHIN) | Nuclear Engineering and Design | |||
100 | 2006 | Application of NonDestructive Testing in Cyclic Fatigue of Endodontic Ni-Ti Rotary Instruments | Li, U.M.; 單秋成(CHOW-SHING SHIN) ; Lin, C.P.; Lan, W.H. | Dental Materials Journal | |||
101 | 2006 | Temperature compensated fiber Bragg grating using fiber reinforced polymetric composites | 單秋成 ; 江家慶; 林志豪; 廖顯奎 | Journal of the Chinese Institute of Engineer | |||
102 | 2006 | Fatigue damage monitoring in polymeric composites using multiple fiber bragg gratings | Shin, C.S.; Chiang, C.C.; CHOW-SHING SHIN | International Journal of Fatigue | |||
103 | 2006 | Fatigue crack propagation properties from small sized rod specimens | Shin, C.S.; Cai, C.Q.; CHOW-SHING SHIN | Nuclear Engineering and Design | |||
104 | 2006 | Embedded fibre Bragg grating sensors for internal fatigue damage monitoring in polymeric composites | Shin, C.S.; Chiang, C.C.; CHOW-SHING SHIN | Key Engineering Materials | |||
105 | 2006 | Embedded Fibre Bragg Grating Sensors for Internal Fatigue Damage Monitoring in Polymeric Composites | Shin, C.S.; Chiang, C.C.; CHOW-SHING SHIN | Key Engineering Materials | |||
106 | 2006 | Application of the embedded optical fiber Bragg grating sensors in detecting the internal fatigue damage of Gr/epoxy laminated composites | Chiang, C.-C.; Lin, C.-L.; CHOW-SHING SHIN | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
107 | 2006 | Temperature compensated fiber bragg grating using fiber reinforced polymeric composites | Shin, C.S.; Chiang, C.-C.; Lin, C.H.; Liaw, S.-K.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
108 | 2006 | Comparison of Single and Double Cladding Long Period Fiber Grating Sensor using an Intensity Modulation Interrogation System | 單秋成 ; 江家慶 | Optics Communications | |||
109 | 2006 | Fatigue Damage Monitoring in Polymeric Composites using multiple Fibre Bragg Gratings | 單秋成 ; 江家慶 | International Journal of Fatigue | |||
110 | 2006 | Device and Method of Temperature Compensating Optical Component | 單秋成 | ||||
111 | 2006 | Energy-Modulating Fiber Grating Sensor | 單秋成 | ||||
112 | 2006 | 用以量測彎曲度之光纖感測系統 | 單秋成 | ||||
113 | 2005 | A normalized area-compliance method for monitoring surface crack development in a cylindrical rod | Cai, C. Q.; 單秋成(CHOW-SHING SHIN) | International Journal of Fatigue | |||
114 | 2005 | A normalized area-compliance method for monitoring surface crack development in a cylindrical rod | Cai, C.Q.; CHOW-SHING SHIN | International Journal of Fatigue | |||
115 | 2005 | Deformation monitoring by using optical fiber grating sensor | 單秋成 ; 江家慶 | Journal of the Chinese Institute of Engineers | |||
116 | 2005 | Hydrogen-enhanced cracking of 2205 duplex stainless steel welds | Young, M.C.; Chan, S.L.I.; Tsay, L.W.; CHOW-SHING SHIN | Materials Chemistry and Physics | |||
117 | 2005 | Energy-Modulating Fiber Grating Sensor | 單秋成 ; 江家慶 | ||||
118 | 2005 | 光纖感測器原理及在複合材料上之應用 | 沈育霖; 單秋成 | 工業安全衛生 | |||
119 | 2004 | 光纖元件之溫度補償方法 | 單秋成 ; 林志豪; 江家慶; 廖顯奎; 曾昱璋; 陳宣臣 | ||||
120 | 2004 | 光纖元件之溫度補償方法 | 單秋成 | ||||
121 | 2004 | 光纖元件之溫度補償方法 | 單秋成 | ||||
122 | 2004 | Experimental and Finite Element analyses on stress intensity factors of elliptical surface crack in a circular shaft under tension and bending | SHIN CS ; Cai, C. Q. | International Journal of Fracture | |||
123 | 2004 | Fatigue crack propagation testing using subsized rotating bending specimens | 單秋成(CHOW-SHING SHIN) ; Chen, P. C. | Nuclear Engineering and Design | |||
124 | 2004 | A discussion on "The stress intensity factor study of an elliptical cracked shaft" by Y.S. Shih and J.J. Chen | Cai, C.Q.; CHOW-SHING SHIN | Nuclear Engineering and Design | 7 | 5 | |
125 | 2004 | Effect of temper, specimen orientation and test temperature on tensile and fatigue properties of wrought and PM AA6061-alloys | Huang, J.C.; 單秋成(CHOW-SHING SHIN) ; Chan, S.L.I. | International Journal of Fatigue | |||
126 | 2004 | An improved cohesive zone model for residual notched strength prediction of composite laminates with different orthotropic lay-ups | Shin, C.S.; Wang, C.M.; CHOW-SHING SHIN | Journal of Composite Materials | |||
127 | 2004 | Fatigue crack propagation testing using subsized rotating bending specimens | Shin, C.S.; Chen, P.C.; CHOW-SHING SHIN | Nuclear Engineering and Design | |||
128 | 2004 | Experimental and finite element analyses on stress intensity factors of an elliptical surface crack in a circular shaft under tension and bending | Shin, C.S.; Cai, C.Q.; CHOW-SHING SHIN | International Journal of Fracture | |||
129 | 2004 | Effect of temper, specimen orientation and test temperature on tensile and fatigue properties of wrought and PM AA6061-alloys | Huang, J.C.; Shin, C.S.; Chan, S.L.I.; CHOW-SHING SHIN | International Journal of Fatigue | |||
130 | 2004 | Fatigue Damage Monitoring in Polymeric Composites using multiple Fibre Bragg Gratings | C.S. Shin; C.C.Chiang; CHOW-SHING SHIN | Third International Conference on Fatigue of Composites (ICFC3)Kyoto, Japan | |||
131 | 2004 | An electronically controlled transmission-line phase shifter | Shin, Chang-Seok; Nevels, Robert; Strieter, Frederick; Biard, J. Robert; CHOW-SHING SHIN | Microwave and Optical Technology Letters | |||
132 | 2004 | Fictitious Crack Growth Model and Residual Strength Prediction Of Composite Laminates with Sharp Notches | Wang, C. M.; 單秋成(CHOW-SHING SHIN) | Journal of Composites Materials | |||
133 | 2004 | 能量量測型長週期光纖光柵溫度感應器 | 單秋成 | ||||
134 | 2004 | 光纖元件之溫度補償方法 | 單秋成 ; 林志豪; 江家慶; 廖顯奎; 曾昱璋; 陳宣臣 | ||||
135 | 2004 | 複材內部損傷探測(3/3) | 單秋成 | ||||
136 | 2004 | An Improved Cohesive Zone Model for Residual Notched Strength Prediction of Composite Laminates with Different Orthotropic Lay-ups | 單秋成(CHOW-SHING SHIN) ; Wang, C. M. | Journal of Composites Materials | |||
137 | 2004 | 能量量測型長週期光纖光柵溫度感應器 | 單秋成 ; 江家慶 | ||||
138 | 2003 | 小尺寸試片疲勞性質測試技術研究(1/2) | 單秋成 | ||||
139 | 2003 | 複材內部損傷探測(2/3) | 單秋成 | ||||
140 | 2002 | 臺中電廠主汽機抽汽逆止閥之損壞原因研究 | 馬劍清 ; 單秋成 ; 張志毅; 蔡賜慶; 楊仁和; 陳慶東; 陳景林; 鍾年勉 | 臺電工程月刊 | |||
141 | 2002 | 複材內部損傷探測(1/3) | 單秋成 | ||||
142 | 2002 | 複合材料內部損傷之偵測 | 單秋成 ; 王楚明; 林志郎 | 強化塑膠 | |||
143 | 2002 | A comparison of as-fatigue and re-consolidation residual properties for notched quasi-isotropic [0/45/90/ - 45]2S and cross-ply [0/90]4S AS4/PEEK composite laminates | Shin, C.S.; Wang, C.M.; CHOW-SHING SHIN | Composites Part A: Applied Science and Manufacturing | |||
144 | 2002 | Residual properties of notched [0/90]4S AS4/PEEK composite laminates after fatigue and re-consolidation | Wang, C.M.; CHOW-SHING SHIN | Composites Part B:Engineering | |||
145 | 2002 | Residual Properties of Notched [0/90]4s AS4/PEEK Composite Laminates after fatigue and re-consolidation | Wang, C. M.; 單秋成(CHOW-SHING SHIN) | Composites | |||
146 | 2002 | A comparison of as-fatigue and Re-consolidation Residual Properties of Notched Quasi-isotropic [0/45/90/-45]2s and Cross-ply [0/90]4s AS4/PEEK Composite Laminates | 單秋成(CHOW-SHING SHIN) ; Wang, C. M. | Composites | |||
147 | 2002 | 碳化矽強化鋁基複材高溫疲勞性質探討(2/2) | 單秋成 | ||||
148 | 2001 | 裂紋填充在疲勞裂紋止裂之探討 | 單秋成 | 工程科技通訊 | |||
149 | 2001 | 核二廠反應器爐心頂部導架之結構完整性分析與可靠度評估 | 徐貴炎; 吳文方 ; 單秋成 ; 黃振國 | 臺電工程月刊 | |||
150 | 2001 | 光纖光柵在複合材料內部缺陷與內部應力、溫度監測之應用 | 單秋成 ; 林志郎 | 檢測科技 | |||
151 | 2001 | 碳化矽強化鋁基複材高溫疲勞性質探討(1/2) | 單秋成 | ||||
152 | 2001 | Fatigue life extension by electroless nickel infiltration plating | Shin, C.S.; Chen, Z.Z.; CHOW-SHING SHIN | International Journal of Fatigue | |||
153 | 2001 | 經使用劣化後GR/PEEK 複合材料之修補(3/3)─子計畫四:含缺陷 Gr/PeeK 複材修補後之機械性質探討 | 單秋成 | ||||
154 | 2001 | Fatigue life extension by electroless nickel infiltration plating | 單秋成(CHOW-SHING SHIN) ; Chen, Z. Z. | International Journal of Fatigue | |||
155 | 2000 | 反應器冷卻水泵軸破損及防治研究─子計畫五:表面裂縫疲勞修補技術研發 | 單秋成 | ||||
156 | 2000 | Model for evaluating the effect of fatigue crack repair by the infiltration method | CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | 26 | 18 | |
157 | 2000 | A model for evaluating the effect of fatigue crack repair by the infiltration method | 單秋成(CHOW-SHING SHIN) ; Cai, C. Q. | Fatigue & Fracture of Engineering Materials & Structures | |||
158 | 2000 | 裂紋填充在疲勞裂紋止裂之探討(2/2) | 單秋成 | ||||
159 | 1999 | 裂紋填充在疲勞裂紋止裂之探討(1/2) | 單秋成 | ||||
160 | 1999 | A modified model for the estimation of fatigue life derived from random vibration theory | Liou, H. Y.; Wu, W. F.; 單秋成(CHOW-SHING SHIN) | Probabilistic Engineering Mechanics | 0 | 0 | |
161 | 1999 | Fatigue crack propagation in the elastic-plastic regime in a low alloy structural steel | Shin, C.-S.; Li, R.-Z.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
162 | 1999 | A novel method for repairing fatigue crack | CHOW-SHING SHIN | Journal of Structural Engineering (Madras) | |||
163 | 1999 | Fatigue Crack Propagation in the Elastic-plastic Regime in a Low Alloy Structural Steel | SHIN CS ; Li; R. Z. | Fracture Mechanics and Fatigue Special Issue of the Journal of the Chinese Institute of Engineers | |||
164 | 1999 | A Novel Method For Repairing Fatigue Crack; Recent Developments in Fatigue and Fracture Mechanics-based Analysis and Design of Structures | SHIN CS ; Chen, Z. Z. | Journal of Structural Engineering | |||
165 | 1999 | 經使用劣化後Gr/PEEK複合材料之修補─子計畫三:含缺陷 Gr/PEEK 複材修補後之機械性質探討(I) | 單秋成 | ||||
166 | 1999 | 疲勞裂縫自動量測系統之發展 | 單秋成 ; 王俊博 | 檢測科技 | |||
167 | 1999 | Modified model for the estimation of fatigue life derived from random vibration theory | Liou H.Y.; Wu W.F ; CHOW-SHING SHIN | Probabilistic Engineering Mechanics | 38 | 32 | |
168 | 1999 | 在3.5%鹽水中形成裂縫間氧化物對疲勞裂縫生長之影響 | 周漢興; 單秋成 ; 宋佩瑄; 許伯秋; 張力 | 中正嶺學報 | |||
169 | 1998 | Mechanical properties of a low temperature cured ceramic matrix composite | SHIN CS ; Wang, J. B. | Materials Chemistry and | |||
170 | 1998 | Effect of artificial closure materials on crack growth retardation | Song, P.S.; Hwang, S.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
171 | 1998 | 熱塑性及熱固性複合材料組件疲勞與破壞之分析與評估(III)─子計畫三:熱塑性及熱固性複合材料受溫度循環及衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
172 | 1998 | Fatigue damage repair by artificial introduction of crack closure | Shin, C.S.; Huang, K.C.; Li, R.Z.; CHOW-SHING SHIN | Key Engineering Materials | |||
173 | 1998 | 疲勞破壞修補之探討 | 單秋成 | ||||
174 | 1998 | Fatigue damage repair by artificial introduction of crack closure | Shin, C. S.; Huang, K. C.; Li, R. Z.; CHOW-SHING SHIN | Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics | |||
175 | 1998 | Effect of artificial closure materials on crack growth retardation | Song, P. S.; Hwang, S.; SHIN CS | Engineering Fracture Mechanics | |||
176 | 1998 | Artificial retardation of fatigue crack growth by the infiltration of cracks by foreign materials | SHIN CS ; Huang, K. C.; Li, R. Z. | Fatigue & Fracture of Engineering Materials & Structures | |||
177 | 1998 | Mechanical properties of a low-temperature-cured ceramic matrix composite | CHOW-SHING SHIN | Materials Chemistry and Physics | |||
178 | 1998 | Artificial retardation of fatigue crack growth by the infiltration of cracks by foreign materials | Shin, C.S.; Huang, K.C.; Li, R.Z.; CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | |||
179 | 1997 | On the elastic longitudinal stress estimation in the neighbourhood of notches | Kujawski, D.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
180 | 1997 | 氧化鋁─NIAL 複合材料之開發研究─子計畫四:AL2O3─NIAL 複合材料之機械性質研究 | 單秋成 | ||||
181 | 1997 | 熱塑性及熱固性複合材料組件疲勞與破壞之分析及評估(II)─子計畫三:熱塑性及熱固性複合材料受溫度循環及衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
182 | 1996 | 熱塑性與熱固性複合材料受溫度循環及溫度衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
183 | 1996 | A12O3/NiA1複合材料之機械性質研究 | 單秋成 ; Shin, Chow-Ching | ||||
184 | 1996 | Effects of anisotropy on the hydrogen diffusivity and fatigue crack propagation of a banded ferrite/pearlite steel | Tau, L.; Chan, S.L.I.; CHOW-SHING SHIN | Hydrogen Effects in Materials | |||
185 | 1996 | Continuous Service Reassurance of Steam Turbine Blades | CHOW-SHING SHIN | Engineering Failure Analysis | |||
186 | 1996 | Hydrogen enhanced fatigue crack propagation of bainitic and tempered martensitic steels | Tau, L.; Chan, S.L.I.; CHOW-SHING SHIN | Corrosion Science | |||
187 | 1996 | Fatigue damage repair: A comparison of some possible methods | Shin, C.S.; Wang, C.M.; Song, P.S.; CHOW-SHING SHIN | International Journal of Fatigue | |||
188 | 1996 | Enhancement in fatigue life through electroplated nickel-induced crack closure | Song, Pey-Shiuan; Hwang, Shin; Shin, Chow-Shing; CHOW-SHING SHIN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
189 | 1996 | 熱塑性及熱固性複合材料組件疫勞與破壞之分析及評估─熱塑性與熱固性複合材料組件疲勞與破壞之分析與評估-子計畫三:熱塑性與熱固性複合材料受溫度循 | 單秋成 | ||||
190 | 1996 | 氧化鋁-NiAl複合材料之開發研究─Al2O3-NiAl複合材料之開發研究子計畫四:A1203-NiAl複合材料之機械性質研究 | 單秋成 | ||||
191 | 1995 | 疲勞裂縫之修補與現場修補系統之開發(II) | 單秋成 | ||||
192 | 1995 | 隨機負荷下鋼鐵在充氫環境中腐蝕疲勞之研究 | 陳立業; 單秋成 | 防蝕工程 | |||
193 | 1994 | Effects of Anisotropy on the Hydrogen Induced Fatigue Propagation of a Banded Ferrite/Pearlite Steel | Chan, S. L. I.; Tau L.; 單秋成 ; Shin, Chow-Ching | The 12th International Corrosion Congress | |||
194 | 1994 | 高強度低合金鋼之低週疲勞累積破損分析 | 黃玉寶; 陳興民; 單秋成 ; 王建義; 楊春欽 | 中華民國第三屆破壞科學研討會 | |||
195 | 1994 | An Investigation on Various Infiltration Methods for Fatigue Crack Repair | Song, P. S.; Wong, C. M.; 單秋成 ; Shin, Chow-Ching | The 1994 Far East Conference on NDT and ROCSNT 9th Annual Conference | |||
196 | 1994 | Experimental and analytical fracture assessment of 165mm diameter AISI 304 seamless piping containing circumferential through-walled crack | C. S. Shin; R. P. Tseng; W.T. Jao; CHOW-SHING SHIN | The International Journal of Pressure Vessels and Piping | |||
197 | 1994 | Experimental calibration of stress intensity factor for piping with cirucumferential through-wall crack | C. S. Shin; C.M. Wang; CHOW-SHING SHIN | The International Journal of Pressure Vessel and piping | |||
198 | 1994 | A practical method to estimate the stress concentration of notches | Shin, C.S.; Man, K.C.; Wang, C.M.; CHOW-SHING SHIN | International Journal of Fatigue | |||
199 | 1994 | Probabilistic analysis of fatigue crack propagation under random loading | Wu, W.-F.; Shin, C.S.; Shen, J.-J.; CHOW-SHING SHIN | Journal of Pressure Vessel Technology | |||
200 | 1994 | A Practical method to estimate the stress concentration factors of notches | C. S. Shin; K. C. Man; C.M. Wang; CHOW-SHING SHIN | The International Journal of Fatigue | |||
201 | 1994 | Experimental and analytical fracture assessment of 165-mm diameter AISI 304 seamless piping containing a circumferential through-wall crack | Shin, C.S.; Tseng, R.P.; Jao, W.T.; CHOW-SHING SHIN | International Journal of Pressure Vessels and Piping | |||
202 | 1994 | The effect of infiltration induced crack closure on crack growth retardation | Sheu, B.C.; Song, P.S.; CHOW-SHING SHIN | Scripta Metallurgica et Materiala | |||
203 | 1994 | 疲勞裂縫之修補與現場修補系統之開發 | 單秋成 | ||||
204 | 1994 | Experimental calibration of stress intensity factor for piping with circumferential through-wall crack | Shin, C.S.; Wang, C.M.; CHOW-SHING SHIN | International Journal of Pressure Vessels and Piping | |||
205 | 1994 | Effects of Anisotropy on the Hydrogen Induced Fatigue Crack Propagation of a Banded Ferrite/Pearlite Steel | Tau, L.; Chan, S. L. I.; 單秋成 ; Shin, Chow-Ching | Journal of Marine Science and Technology | |||
206 | 1994 | A Study on Possible Fatigue Crack Repair Methods | SHIN CS ; 單秋成 ; Shin, Chow-Ching | Fracture Mechanics for Hydroelectric Power System Symposium '94 | |||
207 | 1994 | Fatigue Crack Growth from Stress Concentrations and Fatigue Life Prediction in Notched Components | 單秋成 ; Shin, Chow-Ching | Handbook of Fatigue Crack Propagation in Metallic Structures | |||
208 | 1994 | A reliability assessment of reactor pressure vessels | Wu W.F ; Shin C.S. ; Tsai C.H. | International Journal of Pressure Vessels and Piping | 1 | 1 | |
209 | 1994 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析 | 吳文方(W. F. Wu); 單秋成(C. S. Shin); 陳宗權(T. C. Chen); 陳弘毅(H. Y. Chen); 單秋成 | 中國航空太空學會學刊 | |||
210 | 1993 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析(Ⅱ) | 吳文方 ; 單秋成 ; 陳文平; 黃敏豪; Wu, Wen-Fang | ||||
211 | 1993 | 壓應力疲勞預裂與陶電斷裂韌性探討 | 單秋成 ; 蔣榮德 | ||||
212 | 1993 | An Experimental Study and Reliability Analysis of Fatigue Crack Propagation under Random Loading | 吳文方 ; 單秋成 ; Shen, Jyh-Jeng; Wu, Wen-Fang ; Shin, Chow-Ching | The 6th of International Conference on Structural Safety and Reliability | |||
213 | 1993 | An improved dc potential drop system for crack length measurement | Shin, C.-S.; Huang, W.-H.; Chen, H.-Y.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
214 | 1993 | On the mechanisms and behaviour of overload retardation in AISI 304 stainless steel | Shin, C.S.; Hsu, S.H.; CHOW-SHING SHIN | International Journal of Fatigue | |||
215 | 1993 | Engineering Assessment Methods in the Prediction of Elastic-Plastic Fracture Behaviour | 單秋成 ; Wu, P. L.; Jao, W. T.; Shin, Chow-Ching | The Journal of the Chinese Society of Mechanical Engineers | |||
216 | 1992 | Approximate Calculation of Stress Concentration Factor and Stress Distribution Ahead of Notches | Wong, T. M.; Man, K. C.; 單秋成 ; Shin, Chow-Ching | Ninth National Corference on Mechanical Engineering, the Chinese Society of Mechanical Engineers | |||
217 | 1992 | 壓應力疲勞預裂與陶瓷斷裂韌性探討 | 單秋成 ; 徐鵬凱 | ||||
218 | 1992 | 管材斷裂及疲勞特性探討 | 單秋成 ; 曾瑞鵬 | ||||
219 | 1992 | 陶瓷材料斷裂韌性測試方法之探討 | 單秋成 ; 徐鵬凱; 韋文誠 ; Wei, Wen-Cheng | 中華民國第二屆破壞科學研討會論文集 | |||
220 | 1992 | 帶狀組織及夾雜物對疲勞裂縫成長速率影響之研究 | 陶霖; 陳立業; 單秋成 | 中國材料科學學會81年年會論文集 | |||
221 | 1992 | A Re-Appraisal of the Net Section Plastic Collapse Method in the Assessment of Elastic-Plastic Fracture | 單秋成 ; Jao, W. T.; Wu, P. L.; Shin, Chow-Ching | The Journal of the Chinese Society of Mechanical Engineers | |||
222 | 1992 | Fatigue life extension by an artificially induced retardation mechanism | Shin, C.S.; Hsu, S.H.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
223 | 1992 | 拉伸超載後疲勞裂縫封閉行為量測方法之探討 | 單秋成 ; 徐森煌 | 中華民國力學學會期刊 | |||
224 | 1992 | Fracture and Fatigue Life Analysis of a Low Pressure Stage Turbine Blade | 單秋成 ; Lee, T. K.; Shin, Chow-Ching | Second Symposium on Fracture Science, the Chinese Society of Materials Science | |||
225 | 1992 | Fracture Toughness Testing of Ceramic Materials | 韋文誠 ; SHIN CS ; Hsu, P. H.; Wei, Wen-Cheng | Conference of Fracture Mechanics | |||
226 | 1991 | 疲勞裂縫延伸受高峰應力影響後之減速現象(II) | 單秋成 ; 徐林煌; 楊博昌 | ||||
227 | 1991 | 管材斷裂實驗能力建立及管材斷裂特性探討 | 單秋成 | ||||
228 | 1991 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析 | 吳文方 ; 單秋成 ; 黃文翰; 沈致正; 楊博昌; Wu, Wen-Fang | ||||
229 | 1991 | 疲勞裂縫延伸受高峰應力影響後之減速現象 | 單秋成 | ||||
230 | 1991 | 高峰拉伸負載後疲勞封閉行為量測方法之探討 | 單秋成 ; 徐森煌 | 中國機械工程學會第八屆學術研討會論文集 | |||
231 | 1991 | A Re-Appraisal of the Net Section Plastic Collapse Method in the Assessment of Elastic-Plastic Fracture | 單秋成 ; Jao, W. T.; Wu, P. L.; Shin, Chow-Ching | Eigth National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers | |||
232 | 1991 | Some aspects of corner fatigue crack growth from holes | CHOW-SHING SHIN | International Journal of Fatigue | |||
233 | 1991 | The Stress Intensity Factors of Corner Cracks Emanating from Holes | 單秋成 ; Shin, Chow-Ching | Engineering Fracture Mechanics | |||
234 | 1990 | 彈塑性破壞工程評估方法研究 | 單秋成 | ||||
235 | 1990 | 電廠壽命延長評估 | 單秋成 | 材料與社會 | |||
236 | 1990 | The stress intensity of corner cracks emanating from holes | CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
237 | 1990 | The Fatigue and Fracture of a Zine Die Casting Alloy | 單秋成 ; Fleck, N. A.; Shin, Chow-Ching | International Journal of Fatigue | |||
238 | 1990 | Failure Analysis:Principles and Case Studies | 單秋成 ; Shin, Chow-Ching | ||||
239 | 1989 | Fatigue and fracture of a zinc die casting alloy | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | International Journal of Fatigue | |||
240 | 1989 | A Comparison of Various Stress Intensity Factor Extraction Methods from Finite Element Stress Analysis | Chen, L. S.; 單秋成 ; Shin, Chow-Ching | MRL Bulletin of Research & Development, Materials Research Laboratories | |||
241 | 1988 | 深一機壽命評估與延長 | 單秋成 ; 洪健龍; 陳志冠; 吳耀輝; 張木柱; 蕭乾道 | ||||
242 | 1988 | 火力電廠壽命延長評估 | 單秋成 ; 吳耀輝; 吳志明; 蕭乾道; 張朝成; 顏宏儒; 陳志冠; 張木柱 | ||||
243 | 1988 | The Degradation of Cr-Mo-V Rotor Steel | Shih, C. Y.; Chen, C. K.; 單秋成 ; Chang, L.; Shin, Chow-Ching | Electricity-the Energy for Future Progresser | |||
244 | 1988 | FATIGUE CRACK GROWTH BEHAVIOUR OF A ZINC?ALUMINIUM ALLOY AT HIGH HOMOLOGOUS TEMPERATURES | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Fatigue & Fracture of Engineering Materials & Structures | |||
245 | 1988 | Fatigue crack growth at stress concentrations-the role of notch plasticity and crack closure | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
246 | 1988 | EXPERIMENTAL METHOD TO EVALUATE THE STRESS INTENSITY OF CORNER CRACKS. | Shin, C.S.; Chen, C.K.; CHOW-SHING SHIN | MRL bulletin of research and development | |||
247 | 1988 | SOME OBSERVATIONS ABOUT THE SIZE EFFECT IN THE FATIGUE OF NOTCHED SPECIMENS. | CHOW-SHING SHIN | MRL bulletin of research and development | |||
248 | 1987 | Fatigue Crack Growth Behaviour of a Zinc-Aluminium Alloy at High Homologous Temperatures | 單秋成 ; Smith, R. A.; Shin, Chow-Ching | Fatigue & Fracture of Engineering Materials & Structures | |||
249 | 1987 | Size Effect in the Fatigue of Notched Specimens:An Investigation from the Crack Propagation Point of View | 單秋成 ; Shin, Chow-Ching | Morris Cohen Symposium on Metallurgy | |||
250 | 1987 | Some observations about the size effect in the fatigue of notched specimens | CHOW-SHING SHIN | Scripta Metallurgica | |||
251 | 1987 | OVERLOAD RETARDATION IN A STRUCTURAL STEEL | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | Fatigue & Fracture of Engineering Materials & Structures | |||
252 | 1987 | The Stress Intensity Factors of Corner Cracks | 單秋成 ; Chen, C. K.; Shin, Chow-Ching | Annual Conference of Chinese Society for Materials Science | |||
253 | 1986 | Fatigue Analysis and Control | 單秋成 ; Shin, Chow-Ching | ||||
254 | 1986 | Overload Retardation in a Structural Steel | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | |||
255 | 1986 | A discussion on various estimations of elastic stress distributions and stress concentration factors for sharp edge notches | CHOW-SHING SHIN | International Journal of Fatigue | |||
256 | 1985 | 不等振幅疲勞特性探討 | 單秋成 | ||||
257 | 1985 | Fatigue crack growth under compressive loading | Fleck, N.A.; Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
258 | 1985 | Fatigue crack growth from sharp notches | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | International Journal of Fatigue | |||
259 | 1985 | Stress Intensity Factors for Cracks Emanating from Notches | 單秋成 ; Smith, R. A.; Shin, Chow-Ching | International Symposium on Microstructure and Mechanical Behaviour of Materials | |||
260 | 1983 | Fatigue Properties of Anneal Hardened Cu-30Zn | 單秋成 ; Shin, Chow-Ching |