第 1 到 34 筆結果,共 34 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2022 | Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors | Chang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI | International Journal of Advanced Manufacturing Technology | |||
2 | 2014 | An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate | Chen, P.-C.; Pan, C.-W.; Lee, W.-C.; Li, K.-M.; KUAN-MING LI | International Journal of Advanced Manufacturing Technology | |||
3 | 2013 | An improved remote sensing technique for estimating tool-chip interface temperatures in turning | Li, K.-M.; Wang, C.; Chu, W.-Y.; KUAN-MING LI | Journal of Materials Processing Technology | |||
4 | 2022 | Applied IrO2 Buffer Layer as a Great Promoter on Ti-Doping V2O5 Electrode to Enhance Electrochromic Device Properties | Ko, Tien Fu; Chen, Po Wen; KUAN-MING LI ; HONG-TSU YOUNG | Materials | 4 | 5 | |
5 | 2022 | Characterization analysis of 532 nm laser drilling of silicon-based glass heterogeneous integration composites | Lin, Che Shu; Tai, Chih Ho; Chen, Rou Jhen; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen Tse | International Journal of Advanced Manufacturing Technology | 0 | 0 | |
6 | 2004 | Design of an LTCC Tri-Band Transceiver Module for GPRS Mobile Applications | Lin, Y.-S.; Liu, C.-C.; Li, K.-M.; Chen, C.H.; KUAN-MING LI | IEEE Transactions on Microwave Theory and Techniques | |||
7 | 2021 | Developing the smart sorting screw system based on deep learning approaches | Lin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI | Applied Sciences (Switzerland) | |||
8 | 2014 | Effect of tool wear in ultrasonic vibration-assisted micro-milling | Li, K.-M.; Wang, S.-L.; KUAN-MING LI | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | |||
9 | 2023 | Establishment of Real-Time Adaptive Control Strategy for Milling Parameters | Tai, Chih Ho; Tsai, Ying Te; KUAN-MING LI | IEEE Access | |||
10 | 2010 | Experimental evaluation of minimum quantity lubrication in near micro-milling | Li, K.-M.; Chou, S.-Y.; Li, Kuan-Ming; Chou, Shih-Yen; KUAN-MING LI | Journal of Materials Processing Technology | |||
11 | 2012 | Experimental study on vibration-assisted grinding | Li, K.-M.; Hu, Y.-M.; Yang, Z.-Y.; Chen, M.-Y.; KUAN-MING LI | Journal of Manufacturing Science and Engineering | |||
12 | 2012 | Flank wear model for near dry turning under built-up edge effect | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
13 | 2021 | High-performance complementary electrochromic device based on iridium oxide as a counter electrode | Ko T.-F; Chen P.-W; Li K.-M; Young H.-T; Chang C.-T; Hsu S.-C.; KUAN-MING LI | Materials | |||
14 | 2013 | Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategy | Tang, C.-W.; Li, K.-M.; Yang, M.; Liao, H.-C.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI | Microelectronics Reliability | |||
15 | 2012 | Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching process | Tang, C.-W.; Li, K.-M.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI | Micro and Nano Letters | |||
16 | 2022 | Industrial Anomaly Detection with Skip Autoencoder and Deep Feature Extractor | Tang, Ta Wei; Hsu, Hakiem; Huang, Wei Ren; KUAN-MING LI | Sensors | 2 | 3 | |
17 | 2023 | An innovative integrated approach to automatic defect detection system of cell phone case manufacturing in an empirical implementation | Liao, Chao Chang; Hsu, Chih Ching; HONG-TSU YOUNG ; KUAN-MING LI | Journal of Intelligent Manufacturing | 0 | 0 | |
18 | 2012 | Innovative through-silicon-via formation approach for wafer-level packaging applications | Tang, C.W.; Young, H.T.; Li, K.M.; Tang, Chao Wei; Young, Hong Tsu; Li, Kuan Ming; HONG-TSU YOUNG ; KUAN-MING LI | Journal of Micromechanics and Microengineering | |||
19 | 2021 | Integrating object detection and image segmentation for detecting the tool wear area on stitched image | Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI | Scientific Reports | 10 | 7 | |
20 | 2015 | Investigation of silicon-based light emitting diode sub-mounts: Enhanced performance and potential for improved reliability | HONG-TSU YOUNG ; KUAN-MING LI | Materials Science in Semiconductor Processing | 3 | 3 | |
21 | 2022 | Laser surface modification on rGO/ZnO composite materials for NO2 gas sensing | Lin, Che Shu; Hsieh, Hsin Fang; CHIEN-FANG DING ; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen Tse | Materials Chemistry and Physics | 5 | 5 | |
22 | 2017 | Low-cost camera based laser power monitoring and stabilizing for micro-hole drilling | Ding C.-F. ; Lee M.-S.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | 7 | 7 | |
23 | 2017 | A miniaturized nickel oxide thermistor via aerosol jet technology | Wang C.; Hong G.-Y.; Li K.-M.; KUAN-MING LI ; HONG-TSU YOUNG | Sensors (Switzerland) | 26 | 20 | |
24 | 2007 | Modeling of cutting forces in near dry machining under tool wear effect | KUAN-MING LI | International Journal of Machine Tools and Manufacture | 74 | 62 | |
25 | 2006 | Modeling of cutting temperature in near dry machining | KUAN-MING LI | Journal of Manufacturing Science and Engineering | 57 | 46 | |
26 | 2019 | On the Thermal Memory Effect Reduction of Power Amplifiers Using Pulse Modulation | Wang T.-H.; Chen Y.-H.; Chang C.-W.; Li K.-M.; Chen J.-H. ; Staudinger J.; KUAN-MING LI | IEEE Microwave and Wireless Components Letters | |||
27 | 2014 | Optimization of micromilling microchannels on a polycarbonate substrate | Chen, P.-C.; Pan, C.-W.; Lee, W.-C.; Li, K.-M.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | |||
28 | 2015 | Parameter optimization of micromilling brass mold inserts for microchannels with Taguchi method | Chen, P.-C.; Chen, Y.-C.; Pan, C.-W.; Li, K.-M.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | |||
29 | 2007 | Performance profiling of minimum quantity lubrication in machining | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | International Journal of Advanced Manufacturing Technology | |||
30 | 2007 | Predictive modeling of flank wear in turning under flood cooling | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | Journal of Manufacturing Science and Engineering | |||
31 | 2007 | Predictive Models for Flank Wear in Turning under Flood Cooling Condition | Kuan-Ming Li; Steven Y. Liang; KUAN-MING LI | Journal of Manufacturing Science and Engineering, Transactions of the ASME | |||
32 | 2012 | Study on minimum quantity lubrication in micro-grinding | Li, K.-M.; Lin, C.-P.; KUAN-MING LI | International Journal of Advanced Manufacturing Technology | |||
33 | 2022 | Ultraviolet Laser Sintering of Printed Nickel Oxide Nanoparticles for Thin-Film Thermistor via Aerosol Jet Printing Technology | Chang, Yi Tse; Hung, Kuan Yi; Chien, Chih Hsuan; HONG-TSU YOUNG ; Hsiao, Wen Tse; KUAN-MING LI | Applied Sciences (Switzerland) | 0 | 0 | |
34 | 2018 | 逆向工程應用於飛航事故調查之研究 | 陳子杰(Tsu-Chieh Chen); 袁瑋辰(Wei-Chen Yuan); 李貫銘(Kuan-Ming Li); 莊禮彰(Li-Chang Chuang); 王聖智(Sheng-Jhih Wang); 李貫銘 | 航空安全及管理季刊 |