https://scholars.lib.ntu.edu.tw/handle/123456789/390946
標題: | High specific capacity retention of graphene/silicon nanosized sandwich structure fabricated by continuous electron beam evaporation as anode for lithium-ion batteries | 作者: | Mori, Tatsuhiro CHIH-JUNG CHEN Hung, Tai-Feng Mohamed, Saad Gomaa Lin, Yi-Qiao Lin, Hong-Zheng Sung, James C. Hu, Shu-Fen Liu, Ru-Shi RU-SHI LIU |
關鍵字: | Anode material; Electron beam evaporation; Graphene/silicon multilayer structures; Layer-by-layer structures; Lithium-ion batteries | 公開日期: | 2015 | 卷: | 165 | 起(迄)頁: | 166-172 | 來源出版物: | Electrochimica Acta | 摘要: | A graphene/silicon (Si) multilayer sandwich structures are fabricated using electron beam (EB) deposition without air exposure. The graphene and Si thin films are formed on Cu current correctors through a continuous process in high-vacuum EB chamber. Synthesized graphene should be suggested to the stacked multiple layer from Raman analysis. The fabricated multilayer films are used as anodes. In the beginning, the half-cell, which used a seven-layer of each thickness 50-nm graphene and Si film, exhibits good specific capacity retention over 1000 mA h g-1 after 30 charge/discharge cycles. The capacity value changed with the number of graphene and Si layers. In this study, the number of layers that exhibited optimal properties is seven. Morphological investigation showed a fine layer-by-layer structure. The relationship between different thicknesses of graphene and Si is investigated at 7 L. A 100-nm thickness exhibited optimal properties. Finally, the optimal 7 L and 100-nm thick graphene/Si exhibited high discharge capacitance >1600 mA h g-1 at a current density of 100 mA g-1 after 30 cycles. Initial coulombic and reversible efficiencies exceed 84%. The capacity retention (30th/1st discharge value) at 100 nm and 7 L exceeds 90%. Finally, the soft package battery is assembled by combining the fabricated graphene and Si electrode as anode, LiCoO2 as cathode, separator and liquid electrolyte. It can be used for commercial light-emitting diode (LED) lighting even under bending status. © 2015 Elsevier Ltd. All rights reserved. |
URI: | http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000353499400025&KeyUID=WOS:000353499400025 http://scholars.lib.ntu.edu.tw/handle/123456789/390946 |
DOI: | 10.1016/j.electacta.2015.02.219 | SDG/關鍵字: | Anodes; Copper; Electric batteries; Electrodes; Electron beams; Evaporation; Fabrication; Film preparation; Graphene; Light emitting diodes; Lithium; Lithium alloys; Lithium compounds; Lithium-ion batteries; Multilayer films; Multilayers; Physical vapor deposition; Sandwich structures; Secondary batteries; Silicon; Anode material; Charge/discharge cycle; Electron beam evaporation; High specific capacity; Layer by layer structure; Liquid electrolytes; Multilayer structures; Specific capacities; Lithium batteries |
顯示於: | 化學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。