第 1 到 49 筆結果,共 49 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2024 | Modelling of thermal plasma-assisted carbon tetrafluoride abatement | Chien, Sheng Wei; SHIU-WU CHAU ; Živný, O.; Jeništa, J.; Chen, Shiaw Huei | Journal of Cleaner Production | |||
2 | 2023 | A mass-preserving level set method for simulating 2D/3D fluid flows with deformed interface | Wen, Hao Liang; Yu, Ching Hao; Sheu, Tony Wen Hann; SHIU-WU CHAU | Ocean Engineering | 0 | 0 | |
3 | 2023 | Normal Operating Performance Study of 15 MW Floating Wind Turbine System Using Semisubmersible Taida Floating Platform in Hsinchu Offshore Area | Tong, Hoi Yi; TSUNG-YUEH LIN ; SHIU-WU CHAU | Journal of Marine Science and Engineering | 1 | 1 | |
4 | 2022 | Modeling of argon-steam thermal plasma flow for abatement of fluorinated compounds | Jeništa, Jiří; SHIU-WU CHAU ; Chien, Sheng Wei; Zivný, Oldřich; Takana, Hidemasa; Nishiyama, Hideya; Bartlová, Milada; Aubrecht, Vladimír; Murphy, Anthony B. | Journal of Physics D: Applied Physics | 2 | 0 | |
5 | 2021 | Study on arc and flow characteristics of a non-transferred DC steam torch | Chau S.W; Lu S.Y; Wang P.J.; SHIU-WU CHAU | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A | |||
6 | 2021 | Comparison of Abatement Models for CF4Reacting with Nitrogen Thermal Plasma | Chau S.-W; Chien S.-W; Chen S.-H.; SHIU-WU CHAU | IEEE Transactions on Plasma Science | |||
7 | 2021 | Dynamic amplification of gust-induced aerodynamic loads acting on a wind turbine during typhoons in Taiwan | Lin T.-Y; Yang C.-Y; Chau S.-W; SHIU-WU CHAU ; TSUNG-YUEH LIN | Journal of Marine Science and Engineering | 0 | 0 | |
8 | 2020 | Power prediction of wind farms via a simplified actuator disk model | Chiang, Y.-C.; Hsu, Y.-C.; Chau, S.-W.; SHIU-WU CHAU | Journal of Marine Science and Engineering | |||
9 | 2020 | Development of an Equivalent Wind Farm Model for Frequency Regulation | Wu, Y.-K.; Zeng, J.-J.; Lu, G.-L.; Chau, S.-W.; Chiang, Y.-C.; SHIU-WU CHAU | IEEE Transactions on Industry Applications | 9 | ||
10 | 2019 | Abatement of fluorinated compounds in thermal plasma flow | Chen, S.-H.; ?ivn?, O.; Ma?l?ni, A.; Chau, S.-W.; SHIU-WU CHAU | Journal of Fluorine Chemistry | |||
11 | 2019 | Decomposition Modeling of Carbon Tetrafluoride with Nitrogen Thermal Plasma | Chau, S.-W.; Lin, Y.-T.; Chen, S.-H.; SHIU-WU CHAU | IEEE Transactions on Plasma Science | |||
12 | 2019 | Development of an Equivalent Wind-Farm Model for Frequency Regulation | Wu, Y.-K.; Zeng, J.-J.; Lu, G.-L.; Chau, S.-W.; Chiang, Y.-C.; SHIU-WU CHAU | 2019 IEEE Industry Applications Society Annual Meeting, IAS 2019 | |||
13 | 2017 | Modeling of perfluorocarbons decomposition in nitrogen thermal plasma | Chau, S.W.; Chen, S.H.; SHIU-WU CHAU | 22nd Symposium on Physics of Switching Arc | |||
14 | 2016 | Design and analysis of jacket substructures for offshore wind turbines | Chen, I.-W.; Wong, B.-L.; Lin, Y.-H.; Chau, S.-W.; HSIN-HAOU HUANG ; SHIU-WU CHAU | Energies | 25 | 23 | |
15 | 2016 | Design and test of additive manufacturing for coating thermoplastic PEEK material | Liu, C.Y.; Hsieh, Y.W.; Sun, T.J.; Zeng, J.W.; Wang, A.B.; Lee, N.T.; Chau, S.W.; Wei, W.C.; Liu, B.H.; SHIU-WU CHAU ; AN-BANG WANG ; WEN-CHENG J. WEI | IEEE International Conference on Industrial Technology | 7 | 0 | |
16 | 2016 | Modeling of Air Plasma in Direct-Current Torch at Nonatmospheric Pressure | Chau, S.-W.; Hsu, S.-C.; Chen, S.-H.; SHIU-WU CHAU | IEEE Transactions on Plasma Science | |||
17 | 2015 | Numerical study of flow past two counter rotating cylinders using immersed boundary method | Chern, M.-J.; Purnadiana, F.R.; Noor, D.-Z.; Horng, T.-L.; Chau, S.-W.; Odhiambo, E.; SHIU-WU CHAU | Journal of Marine Science and Technology (Taiwan) | |||
18 | 2014 | Nonequilibrium modeling of steam plasma in a nontransferred direct-current torch | Chau, S.-W.; Tai, C.-M.; Chen, S.-H.; SHIU-WU CHAU | IEEE Transactions on Plasma Science | |||
19 | 2014 | The dynamic behavior of microdroplet formation on the top surface of micropillar during a dewetting process | Dwiyantoro, B.A.; Chau, S.W.; SHIU-WU CHAU | Journal of Computational and Theoretical Nanoscience | |||
20 | 2013 | The dependence of microdroplet size on the parameters governing the dewetting process on circular micropillar arrays | Dwiyantoro, B.A.; Chau, S.-W.; SHIU-WU CHAU | Journal of Mechanical Science and Technology | |||
21 | 2013 | The influence of cross-sectional shape and orientation of micropillar surface on microdroplet formation by a dewetting process | Dwiyantoro, B.A.; Chau, S.-W.; SHIU-WU CHAU | Journal of Engineering and Technological Sciences | |||
22 | 2013 | Thin-film deposition modeling of hydrogenated amorphous silicon in the afterglow of argon plasma | Chau, S.W.; Pham, Q.T.; Nguyen, M.N.; SHIU-WU CHAU | Computers and Fluids | |||
23 | 2012 | Fabrication of Mg-based bulk metallic glass molds by thermal imprint process | Chang, F.-Y.; Cheng, C.-Y.; Chau, S.-W.; Chu, J.P.; Chen, Y.-C.; SHIU-WU CHAU | Intermetallics | |||
24 | 2012 | The dynamic behavior of droplet formation on micropillar surface during a dewetting process | Dwiyantoro, B.A.; Chau, S.-W.; SHIU-WU CHAU | IEEE Conference on Nanotechnology | |||
25 | 2012 | Determination of thermal response on mold surface and recommendation of feasible heating time and gas flow rate for a circular cavity by gas preheating | Chau, S.W.; SHIU-WU CHAU | International Polymer Processing | 0 | 0 | |
26 | 2011 | Modeling steady axis-symmetric thermal plasma flow of air by a parallelized magneto-hydrodynamic flow solver | Chau, S.W.; Hsu, K.L.; SHIU-WU CHAU | Computers and Fluids | |||
27 | 2011 | Modeling of axis-symmetric steam plasma flow in a non-transferred torch | Chau, S.W.; Lu, S.Y.; Wang, P.J.; SHIU-WU CHAU | Computer Physics Communications | |||
28 | 2010 | Patterning nanowire and micro-/nanoparticle array on micropillar-structured surface: Experiment and modeling | Lin, C.H.; Guan, J.; Chau, S.W.; Chen, S.C.; Lee, L.J.; SHIU-WU CHAU | Biomicrofluidics | |||
29 | 2009 | Numerical study on scale effect of form factor | Kouh, J.-S.; Chen, Y.-J.; Chau, S.-W.; SHIU-WU CHAU | Ocean Engineering | |||
30 | 2009 | Experimental and numerical analysis of DNA nanostrand array formation by molecular combing on microwell-patterned surface | Lin, C.H.; Guan, J.; Chau, S.W.; Lee, L.J.; SHIU-WU CHAU | Journal of Physics D: Applied Physics | |||
31 | 2009 | Numerical simulations and verifications of cyclic and transient temperature variations in injection molding process | Li, H.-M.; Chen, S.-C.; Shen, C.; Chau, S.-W.; Lin, Y.; SHIU-WU CHAU | Polymer - Plastics Technology and Engineering | |||
32 | 2009 | Parallel molecular dynamics simulation of Head-on collision of two nanoscale droplets with low relative speed | Juang R.-R; Lee Y.-M; Chiang C.-H; Wu J.-S; Hsu Y.L; SHIU-WU CHAU | Journal of Computational and Theoretical Nanoscience | 3 | 3 | |
33 | 2008 | Erratum: Comment on "metastable extension of the liquid-vapor phase equilibrium curve and surface tension" (Journal of Chemical Physics (2007) 126 (214505)) | Juang, R.R.; Chau, S.W.; SHIU-WU CHAU | Journal of Chemical Physics | |||
34 | 2008 | DNA stretching and immobilization through the air/water dewetting process | Liao, W.-C.; Hu, X.; Wang, W.; Lee, L.J.; Lin, C.-H.; Chau, S.-W.; SHIU-WU CHAU | AIChE Annual Meeting, Conference Proceedings | |||
35 | 2008 | Determination of Yarn Interlacing Frequency of Triangular Interlacing Nozzles through a Compressible Flow Simulation | Chau, S.-W.; Liao, W.-L.; SHIU-WU CHAU | Textile Research Journal | |||
36 | 2008 | Three-dimensional simulation of primary and secondary penetration in a clip-shaped square tube during a gas-assisted injection molding process | Chau, S.-W.; SHIU-WU CHAU | Polymer Engineering and Science | |||
37 | 2007 | Experimental study on copper cathode erosion rate and rotational velocity of magnetically driven arcs in a well-type cathode non-transferred plasma torch operating in air | Chau, S.W.; Hsu, K.L.; Lin, D.L.; Tzeng, C.C.; SHIU-WU CHAU | Journal of Physics D: Applied Physics | |||
38 | 2007 | Modeling and experimental validation of a 1.2 MW DC transferred well-type plasma torch | Chau, S.W.; Hsu, K.L.; Lin, D.L.; Chen, J.S.; Tzeng, C.C.; SHIU-WU CHAU | Computer Physics Communications | |||
39 | 2007 | Study on the cooling enhancement of LED heat sources via an electrohydrodynamic approach | Chau, S.W.; Lin, C.H.; Yeh, C.H.; Yang, C.; SHIU-WU CHAU | IECON Proceedings (Industrial Electronics Conference) | |||
40 | 2006 | Numerical study on juncture vortex of submarine's sail | Kouh, J.-S.; Chen, Y.-J.; Tsai, S.-Y.; Chien, H.-P.; Chau, S.-W.; SHIU-WU CHAU | Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology | |||
41 | 2006 | A study on mixing efficiency in a two-channel circular micromixer | Chang, M.; Hu, Y.-H.; Chau, S.-W.; Lin, K.-H.; SHIU-WU CHAU | Journal of Mechanics | |||
42 | 2006 | Three-dimensional simulation of melt filling and gas penetration in gas-assisted injection molding process using a finite volume formulation | Chau, S.W.; Lin, Y.W.; SHIU-WU CHAU | Journal of Polymer Engineering | |||
43 | 2006 | Development of a super class high-speed purse seiner | Tsai J.F; Kouh J.S; SHIU-WU CHAU ; Hsu T.F; Chen C.C. | Journal of Taiwan Society of Naval Architects and Marine Engineers | 0 | ||
44 | 2004 | Investigation of cavitation inception characteristics of hydrofoil sections via a viscous approach | Chau, S.-W.; Hsu, K.-L.; Kouh, J.-S.; Chen, Y.-J.; SHIU-WU CHAU | Journal of Marine Science and Technology | |||
45 | 2004 | The fluid property dependency on micro-fluidic characteristics in the deposition process for microfabrication | Chau, S.W.; Hsu, K.L.; Chen, S.C.; Liou, T.M.; Shih, K.C.; SHIU-WU CHAU | Biosensors and Bioelectronics | |||
46 | 2002 | Three-dimensional simulations of the droplet formation during the inkjet printing process | Liou, T.M.; Shih, K.C.; Chau, S.W.; Chen, S.C.; SHIU-WU CHAU | International Communications in Heat and Mass Transfer | |||
47 | 2002 | Application of two-phase fluid approach for free-surface ship flow simulation | Chen, Y.-J.; Chau, S.-W.; Kouh, J.-S.; SHIU-WU CHAU | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
48 | 1993 | Computer-aided geometric design and panel generation for hull forms based on rational cubic B?zier curves | Kouh, J.S.; Chau, S.W.; SHIU-WU CHAU | Computer Aided Geometric Design | |||
49 | 1988 | 電腦輔助船體外板展開應用研究 | 李常聲; 郭真祥; 趙修武 |