公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
2018 | Correlation between Fatigue Crack Growth behavior and fracture surface roughness on cold-rolled austenitic stainless steels in gaseous hydrogen | Chen, T.-C.; Chen, S.-T.; Tsay, L.-W.; Shiue, R.-K.; REN-KAE SHIUE | Metals | | | |
2012 | Developing corrosion-resistant joints applied in the plate heat exchanger | Shu, C.H.; Hsu, H.W.; Yeh, T.Y.; Chen, W.S.; Shiue, R.K.; REN-KAE SHIUE | Advanced Materials Research | | | |
2021 | The dilution effect in high-power disk laser welding the steel plate using a nickel-based filler wire | Chiang M.-F; Lo T.-Y; Chien P.-H; Chi C.-H; Chang K.-C; Yeh A.-C; Shiue R.-K.; REN-KAE SHIUE | Metals | | | |
2021 | Dissimilar brazing of Ti–15Mo–5Zr–3Al and commercially pure titanium using Ti–Cu–Ni foil | Yue G.-L; Chen T.-C; Shiue R.-K; Tsay L.-W.; REN-KAE SHIUE | Materials | | | |
2019 | Dissimilar infrared brazing of cocrfe(Mn)ni equiatomic high entropy alloys and 316 stainless steel | Lin, C.; Shiue, R.-K.; Wu, S.-K.; Lin, Y.-S.; REN-KAE SHIUE | Crystals | | | |
2019 | Dissimilar welding of T92/T91/T22 steels used in supercritical power plant | Kuo, H.-T.; Liu, Y.-C.; Huang, J.-Y.; Shiue, R.-K.; REN-KAE SHIUE | Key Engineering Materials | | | |
2024 | The Effect of Homogenization Heat Treatment on 316L Stainless Steel Cast Billet | Chu, Hung Yang; REN-KAE SHIUE ; Cheng, Sheng Yuan | Materials | | | |
2017 | Effect of low-temperature sensitization on hydrogen embrittlement of 301 stainless steel | Yu, C.; Shiue, R.-K.; Chen, C.; Tsay, L.-W.; REN-KAE SHIUE | Metals | | | |
2018 | The effect of normalizing temperature on the short-term creep rupture of the simulated HAZ in Gr.91 steelwelds | Wu, H.-W.; Wu, T.-J.; Shiue, R.-K.; Tsay, L.-W.; REN-KAE SHIUE | Metals | | | |
2021 | The effect of oxygen pressure in active brazing 8YSZ and Crofer 22H alloy | Huang L.-W; Wu Y.-Y; Shiue R.-K.; REN-KAE SHIUE | Journal of Materials Research and Technology | | | |
2016 | The effect of post-weld heat treatment on the microstructure and notched tensile fracture of Ti-15V-3Cr-3Al-3Sn to Ti-6Al-4V dissimilar laser welds | Hsieh, C.T.; Shiue, R.K.; Huang, R.-T.; Tsay, L.W.; REN-KAE SHIUE | Materials Science and Engineering A | | | |
2014 | The effect of post-weld heat treatment on the notched tensile fracture of Ti-6Al-4V to Ti-6Al-6V-2Sn dissimilar laser welds | Hsieh, C.T.; Chu, C.Y.; Shiue, R.K.; Tsay, L.W.; REN-KAE SHIUE | Materials and Design | | | |
2004 | The effect of residual thermal stresses on the fatigue crack growth of laser-annealed 304 stainless steels | Tsay, L.W.; Young, M.C.; Chou, F.Y.; Shiue, R.K.; REN-KAE SHIUE | Materials Chemistry and Physics | | | |
2004 | The effect of residual thermal stresses on the fatigue crack growth of laser-surface-annealed AISI 304 stainless steel. Part I: Computer simulation | Shiue, R.K.; Chang, C.T.; Young, M.C.; Tsay, L.W.; REN-KAE SHIUE | Materials Science and Engineering A | | | |
2001 | Effect of solder creep on the reliability of large area die attachment | Zhuang, W.D.; Chang, P.C.; Chou, F.Y.; Shiue, R.K.; REN-KAE SHIUE | Microelectronics Reliability | | | |
2010 | The Effect of Substrate Dissolution in Brazing CP-Ti and Ti-15-3 Using Clad Ti-15Cu-15Ni Filler | Wu, Z.Y.; Yeh, T.Y.; Shiue, R.K.; REN-KAE SHIUE | ISIJ International | 9 | 9 | |
2017 | The effect of tempering on low-temperature toughness of the direct quenched high-strength offshore steel | Tseng, T.-H.; Yu, C.; Shiue, R.-K.; Yang, T.-C.; Huang, C.-Y.; REN-KAE SHIUE | Key Engineering Materials | | | |
2018 | Effects of grain boundary microconstituents on heat-affected zone cracks in a Mar-M004 weldment | Chen, T.-C.; Cheng, Y.-H.; Tsay, L.-W.; Shiue, R.-K.; REN-KAE SHIUE | Metals | | | |
2021 | Effects of heat treatments on the microstructure and environment-induced cracking of CF8A steel in simulated BWR water | Chen T.-C; Huang J.-Y; Shiue R.-K; Tsay L.-W.; REN-KAE SHIUE | International Journal of Pressure Vessels and Piping | | | |
2020 | Effects of thermal simulation on the creep fracture of the mod. 9cr-1mo weld metal | Liao, C.-C.; Wang, C.-C.; Chen, T.-C.; Shiue, R.-K.; Tsay, L.-W.; REN-KAE SHIUE | Metals | | | |