第 1 到 129 筆結果,共 129 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2015 | Atom probe study of chromium oxide spinels formed during intergranular corrosion | La Fontaine, A.; Yen, H.-W.; Felfer, P.J.; Ringer, S.P.; Cairney, J.M.; HUNG-WEI YEN | Scripta Materialia | |||
2 | 2014 | Atomic-scale observation of parallel development of super elasticity and reversible plasticity in GaAs nanowires | Bao, P.; Wang, Y.; Cui, X.; Gao, Q.; Yen, H.-W.; Liu, H.; Kong Yeoh, W.; Liao, X.; Du, S.; Hoe Tan, H.; Jagadish, C.; Zou, J.; Ringer, S.P.; Zheng, R.; HUNG-WEI YEN | Applied Physics Letters | |||
3 | 2009 | Characterization of interphase-precipitated nanometer-sized carbides in a Ti-Mo-bearing steel | Yen, H.-W.; Huang, C.-Y.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 114 | 96 | |
4 | 2020 | Comparative corrosion behavior of Fe 50 Mn 30 Co 10 Cr 10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5 wt% NaCl solution | Lu, C.-W.; Lu, Y.-S.; Lai, Z.-H.; Yen, H.-W.; Lee, Y.-L.; HUNG-WEI YEN ; YUEH-LIEN LEE | Journal of Alloys and Compounds | 57 | ||
5 | 2018 | Comparative study on spin-orbit torque efficiencies from W/ferromagnetic and W/ferrimagnetic heterostructures | Wang, T.-C.; Chen, T.-Y.; Wu, C.-T.; Yen, H.-W.; CHI-FENG PAI ; HUNG-WEI YEN | Physical Review Materials | 28 | 26 | |
6 | 2024 | Complementary use of atom probe tomography (APT) and differential hall effect metrology (DHEM) for activation loss in phosphorus-implanted polycrystalline silicon | Lin, Kun Lin; Lee, Fa Yan; Chen, Yi Meng; Tseng, Yu Jen; HUNG-WEI YEN | Scripta Materialia | 0 | ||
7 | 2011 | Complementary use of transmission electron microscopy and atom probe tomography for the examination of plastic accommodation in nanocrystalline bainitic steels | Caballero, F.G.; Yen, Hung-Wei ; Miller, M.K.; Yang, Jer-Ren ; Cornide, J.; Garcia-Mateo, C. | Acta Materialia | 72 | 65 | |
8 | 2017 | Coopetitive micro-mechanisms between recrystallization and transformation during/after dynamic strain-induced transformation in aluminum-containing low-carbon steel | Chen, S.-C.; Huang, C.-Y.; Wang, Y.-T.; Yen, H.-W.; HUNG-WEI YEN | Materials and Design | |||
9 | 2010 | Corrigendum to “Inducement of bainite and carbide transformation from retained austenite based on a high strain rate” [Scr. Mater. 62 (2010) 372–375] | Hsu, Hsiu-Chuan; Lin, Yu-Cyuan; Wang, Shing-Hoa; Kao, Fang-Hsin; Lee, Wei-Chih; JER-REN YANG ; Hsu, Ping-Wei; HUNG-WEI YEN ; Lee, W.-S | Scripta Materialia | 2 | 0 | |
10 | 2020 | Corrosion Behavior and Passive Film Characterization of Fe 50 Mn 30 Co 10 Cr 10 Dual-Phase High-Entropy Alloy in Sulfuric Acid Solution | Lu, Y.-S.; Lu, C.-W.; Lin, Y.-T.; Yen, H.-W.; Lee, Y.-L.; HUNG-WEI YEN ; YUEH-LIEN LEE | Journal of the Electrochemical Society | 25 | ||
11 | 2019 | Corrosion behavior and surface analysis of 690 MPa-grade offshore steels in chloride media | Huang, Wei Hsuan; HUNG-WEI YEN ; YUEH-LIEN LEE | Journal of Materials Research and Technology | 22 | 20 | |
12 | 2022 | Crystalline characteristics of a dual-phase precipitation hardening stainless steel in quenched solid solution and aging treatments | Ping-Jui Y; Cheng-Yao H; Yi-Ting L; Yu-Cheng S; HUNG-WEI YEN ; Cheng-An H; Shing-Hoa W; Jien-Wei Y; Wen-Hsing H; Tzy-Rong L; Tai-Wen H. | Materials Chemistry and Physics | 2 | 3 | |
13 | 2020 | Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels | Raabe, D.; Sun, B.; Kwiatkowski Da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Thoudden Sukumar, P.; Souza Filho, I.R.; Katnagallu, S.; J?gle, E.; K?rnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.H.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S.-L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.; HUNG-WEI YEN | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | |||
14 | 2012 | Deformation twinning in submicron and micron pillars of twinning-induced plasticity steel | Wu, S.Z.; Yen, H.W.; Huang, M.X.; Ngan, A.H.W.; HUNG-WEI YEN | Scripta Materialia | |||
15 | 2022 | Deformation-activated recrystallization twin: New twinning path in pure aluminum enabled by cryogenic and rapid compression | Liu M; Wang P; Lu G; Huang C.-Y; You Z; Wang C.-H; HUNG-WEI YEN | iScience | 5 | 3 | |
16 | 2022 | Digital Reconstruction of Engineered Austenite: Revisiting Effects of Grain Size and Ausforming on Variant Selection of Martensite | Huang, CY; SHAO-LUN LU ; HUNG-WEI YEN | METALS | 5 | 4 | |
17 | 2021 | Disordering of L12 Phase in High-Entropy Alloy Deformed at Cryogenic Temperature | Liu H.-C; Kuo C.-M; Shen P.-K; Huang C.-Y; Yen H.-W; Tsai C.-W.; HUNG-WEI YEN | Advanced Engineering Materials | |||
18 | 2022 | Effect of cell wall on hydrogen response in CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting | Lin, Yi Ting; An, Xianghai; Zhu, Zhiguang; Nai, Mui Ling Sharon; Tsai, Che Wei; HUNG-WEI YEN | Journal of Alloys and Compounds | 12 | 11 | |
19 | 2017 | Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel | Tsai, S.-P.; Jen, C.-H.; Yen, H.-W.; Chen, C.-Y.; Tsai, M.-C.; Huang, C.-Y.; Wang, Y.-T.; HUNG-WEI YEN ; JER-REN YANG ; Tsai, Shao-Pu | Materials Characterization | 38 | 31 | |
20 | 2020 | Efficiency improvement analysis of nano-patterned sapphire substrates and semi-transparent superlattice contact layer in UVC light-emitting diodes | Huang C.-Y; Tsai C.-L; Huang C.-Y; Yang R.-Y; Wu Y.S; Yen H.-W; Fu Y.-K.; HUNG-WEI YEN | Applied Physics Letters | |||
21 | 2020 | Efficient Spin-Orbit Torque Switching with Nonepitaxial Chalcogenide Heterostructures | Chen, T.-Y.; Peng, C.-W.; Tsai, T.-Y.; Liao, W.-B.; Wu, C.-T.; Yen, H.-W.; Pai, C.-F.; CHI-FENG PAI ; HUNG-WEI YEN | ACS Applied Materials and Interfaces | 32 | 27 | |
22 | 2024 | Electrochemical hydrogen charging treatment for hydrogenated 316 L stainless steel induced hydrogen therapy for orthopedic implantation | Lin, Yu Chien; Dhawan, Udesh; Liu, Yen Chen; YUEH-LIEN LEE ; Liu, Xinke; HUNG-WEI YEN ; Hu, Chih Chien; Chung, Ren Jei | Surface and Coatings Technology | |||
23 | 2024 | Engineering metal-carbide hydrogen traps in steels | Liu, Pang Yu; Zhang, Boning; Niu, Ranming; Lu, Shao-Lun; Huang, Chao; Wang, Maoqiu; Tian, Fuyang; Mao, Yong; Li, Tong; Burr, Patrick A.; Lu, Hongzhou; Guo, Aimin; HUNG-WEI YEN ; Cairney, Julie M.; Chen, Hao; Chen, Yi Sheng | Nature Communications | |||
24 | 2022 | Enhancement in mechanical properties through an FCC-to-HCP phase transformation in an Fe-17.5Mn-10Co-12.5Cr-5Ni-5Si (in at%) medium-entropy alloy | Lin K; Chen S.-C; Lin H.-C; HSIN-CHIH LIN ; HUNG-WEI YEN | Journal of Alloys and Compounds | 8 | 6 | |
25 | 2022 | Evaluating hydrogenated nickel-titanium alloy for orthopedic implant | Nguyen T.-T; Hu C.-C; Chou B.-Y; Chou C.-Y; Lin G.-Y; Hu Y.-C; Chen Y.-L; Hsu W.-T; Lin Z.-S; YUEH-LIEN LEE ; CHIH-HSUAN CHEN ; HUNG-WEI YEN ; Chung R.-J. | Journal of Materials Research and Technology | 1 | 1 | |
26 | 2021 | Extraordinary warm ductility of a Mn-rich high-strength steel achieved at temperature below 0.5 Tm | Cheng G.-J; Lai Z.-H; Jia T; Huang C.-Y; Yen H.-W.; HUNG-WEI YEN | Materials Science and Engineering A | |||
27 | 2020 | Fatigue analyses and life predictions of laser-welded lap-shear specimens made of low carbon and high strength low alloy steels | Su, Z.-M.; Lin, P.-C.; Lai, W.-J.; Pan, J.; Cheng, G.-J.; Yen, H.-W.; HUNG-WEI YEN | International Journal of Fatigue | 10 | ||
28 | 2024 | From stoichiometric to off-stoichiometric GeTe: Phase diagram reconstruction and thermoelectric performance reassessment | Tsai, Yi Fen; Chao, Ying Chun; Hsing, Cheng Rong; Wang, Kuang Kuo; Tung, Yung Hsiang; Yang, Chun Chuen; Chen, Sinn Wen; Snyder, G. Jeffrey; HUNG-WEI YEN ; Wei, Ching Ming; Wei, Pai Chun; Wu, Hsin Jay | Acta Materialia | |||
29 | 1976 | Gaas Distributed Bragg Reflector Lasers | Yen, Hw; Ng, W.; Samid, I.; Yariv, A.; HUNG-WEI YEN | Optics Communications | |||
30 | 1974 | Gaas-Ga1-Xalxas Double-Heterostructure Distributed-Feedback Diode Lasers | Nakamura, M.; Aiki, K.; Umeda, J.; Yariv, A.; Yen, Hw; Morikawa, T.; HUNG-WEI YEN | Applied Physics Letters | |||
31 | 1975 | Gaas-Gaalas Distributed-Feedback Diode Lasers with Separate Optical and Carrier Confinement | Aiki, K.; Nakamura, M.; Umeda, J.; Yariv, A.; Katzir, A.; Yen, Hw; HUNG-WEI YEN | Applied Physics Letters | 70 | ||
32 | 1975 | Gaas-Gaalas Double-Heterostructure Injection Lasers with Distributed Feedback | Nakamura, M.; Aiki, K.; Umeda, J.; Katzir, A.; Yariv, A.; Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
33 | 2021 | Gradient microstructure and interfacial strength of CoCrFeMnNi high-entropy alloy in solid-state ultrasonic welding | Lin J.-Y; Lai Z.-H; Otsuki T; Yen H.-W; Nambu S.; HUNG-WEI YEN | Materials Science and Engineering A | |||
34 | 2017 | Grain boundary engineering for improving conductivity of polycrystalline SrTiO<inf>3</inf> | Tzeng, W.-L.; Yen, H.-W.; Lin, W.-C.; Shih, S.-J.; HUNG-WEI YEN | Ceramics International | |||
35 | 2024 | Grand herringbone architecture securing the high thermoelectric performance of GeTe | Tsai, Yi Fen; Wei, Pai Chun; Tsou, Nien Ti; Chao, Ying Chun; HUNG-WEI YEN ; Lin, Jhe Yu; Wang, Kuang Kuo; Wu, Hsin Jay | Materials Today Physics | |||
36 | 2013 | Heat treatment of superbainitic steels | Chang, H.-T.; Yen, H.-W.; Lin, W.-T.; Huang, C.-Y.; HUNG-WEI YEN ; JER-REN YANG | International Heat Treatment and Surface Engineering | 4 | 0 | |
37 | 2021 | Heterogeneous structure-induced strength-ductility synergy by partial recrystallization during friction stir welding of a high-entropy alloy | Lin, P.-T.; Liu, H.-C.; Hsieh, P.-Y.; Wei, C.-Y.; Tsai, C.-W.; Sato, Y.S.; Chen, S.-C.; Yen, H.-W.; Lu, N.-H.; Chen, C.-H.; CHIH-HSUAN CHEN ; HUNG-WEI YEN | Materials and Design | |||
38 | 2017 | High dislocation density-induced large ductility in deformed and partitioned steels | He, B.B.; Hu, B.; Yen, H.W.; Cheng, G.J.; Wang, Z.K.; Luo, H.W.; Huang, M.X.; HUNG-WEI YEN | Science | |||
39 | 1982 | High-Frequency Characteristics of Gaaias Injection-Lasers | Figueroa, L.; Slayman, Cw; Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
40 | 2022 | High-quality AlGaN epitaxy on lattice-engineerable AlN template for high-power UVC light-emitting diodes | Walde S; Huang C.-Y; Tsai C.-L; Hsieh W.-H; Fu Y.-K; Hagedorn S; Yen H.-W; Lu T.-C; Weyers M; Huang C.-Y.; HUNG-WEI YEN | Acta Materialia | |||
41 | 2017 | High-quality and highly-transparent AlN template on annealed sputter-deposited AlN buffer layer for deep ultra-violet light-emitting diodes | Huang, C.-Y.; Wu, P.-Y.; Chang, K.-S.; Lin, Y.-H.; Peng, W.-C.; Chang, Y.-Y.; Li, J.-P.; Yen, H.-W.; Wu, Y.S.; Miyake, H.; Kuo, H.-C.; HUNG-WEI YEN | AIP Advances | |||
42 | 2017 | High-temperature tempered martensite embrittlement in quenched-and-tempered offshore steels | Yen H.-W.; Chiang M.-H.; Lin Y.-C.; Chen D.; Huang C.-Y.; HSIN-CHIH LIN ; HUNG-WEI YEN | Metals | 23 | 20 | |
43 | 2021 | Highly crystalline colloidal nickel oxide hole transport layer for low-temperature processable perovskite solar cell | HUNG-WEI YEN ; YULIA GALAGAN | Chemical Engineering Journal | 9 | 9 | |
44 | 2021 | HRTEM investigations on nano precipitates in Custom 475 maraging stainless steel | Huang C.-Y; Yen H.-W.; HUNG-WEI YEN | Materials Characterization | |||
45 | 2020 | Hydrogen trapping and desorption of dual precipitates in tempered low-carbon martensitic steel | Lin, Y.-C.; McCarroll, I.E.; Lin, Y.-T.; Chung, W.-C.; Cairney, J.M.; Yen, H.-W.; HUNG-WEI YEN | Acta Materialia | 35 | ||
46 | 2022 | Hydrogen trapping at dislocations, carbides, copper precipitates and grain boundaries in a dual precipitating low-carbon martensitic steel | McCarroll, Ingrid E.; Lin, Yu-Chen; Rosenthal, Alexander; HUNG-WEI YEN ; Cairney, Julie M. | Scripta Materialia | 6 | 3 | |
47 | 2022 | Hydrogen-induced ductilization in a novel austenitic lightweight TWIP steel | Lai Z.-H; Lin Y.-T; Sun Y.-H; Tu J.-F; HUNG-WEI YEN | Scripta Materialia | 12 | 11 | |
48 | 2020 | Hydrogen-induced embrittlement of nickel-chromium-molybdenum containing HSLA steels | Hsu, Y.-T.; Jiang, H.-Y.; Yen, H.-W.; Lin, H.-C.; Hong, S.; HUNG-WEI YEN ; HSIN-CHIH LIN | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A | |||
49 | 2017 | Hydrogenation effect on uniaxial magnetic anisotropy of a Co <inf>x</inf> Pd <inf>1?x</inf> alloy microstructure | Mudinepalli, V.R.; Chen, Y.-C.; Chang, P.-C.; Hsu, C.-C.; Tsai, C.-Y.; Chiu, H.-C.; Wu, C.-T.; Yen, H.-W.; Shih, S.-J.; Lin, W.-C.; HUNG-WEI YEN | Journal of Alloys and Compounds | |||
50 | 2022 | Identification of prior β grains of additive manufactured Ti-6Al-4V alloy using electron backscatter diffraction | Ni, Kai; Ku, Ming Hsiang; Tseng, Yu Jen; HUNG-WEI YEN ; Wu, Ming Wei | Materials Letters | 4 | 0 | |
51 | 2024 | Implemented in-situ heat treatment process for controlling the residual thermal stresses during the fabrication of Ti-6Al-4V titanium alloy through additive manufacturing | Yadav, B. N.; Lin, De Wei; Lin, Min Chieh; Tseng, Yu Jen; HUNG-WEI YEN ; Van Tran, Xuan; Lin, Pai Chen | Materials Letters | |||
52 | 2020 | Improvement in oxidation behavior of Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 high-entropy superalloys by minor Nb addition | Yang, J.-J.; Kuo, C.-M.; Lin, P.-T.; Liu, H.-C.; Huang, C.-Y.; Yen, H.-W.; Tsai, C.-W.; HUNG-WEI YEN | Journal of Alloys and Compounds | 23 | ||
53 | 2018 | Increasing yield strength of medium Mn steel by engineering multiple strengthening defects | He, B.B.; Huang, B.M.; He, S.H.; Qi, Y.; Yen, H.W.; Huang, M.X.; HUNG-WEI YEN | Materials Science and Engineering A | |||
54 | 2010 | Inducement of bainite and carbide transformation from retained austenite based on a high strain rate | Hsu, H.-C.; Lin, Y.-C.; Wang, S.-H.; Kao, F.-H.; Lee, W.-C.; Yang, J.-R.; Hsu, P.-W.; Yen, H.-W.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 3 | 4 | |
55 | 2015 | The influence of partitioning on the growth of intragranular �\ in near-�] Ti alloys | Li, T.; Ahmed, M.; Sha, G.; Shi, R.; Casillas, G.; Yen, H.-W.; Wang, Y.; Pereloma, E.V.; Cairney, J.M.; HUNG-WEI YEN | Journal of Alloys and Compounds | |||
56 | 2012 | The influence of Widmanst?tten ferrite on yielding behavior of Nb-containing reinforcing steel bars | Huang, B.-M.; Yen, H.-W.; Ho, D.; Ho, H.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 6 | 4 | |
57 | 2022 | Inorganic-Cation Pseudohalide 2D Cs2Pb(SCN)2Br2 Perovskite Single Crystal | Liao C.-H; Chen C.-H; Bing J; Bailey C; Lin Y.-T; Pandit T.M; Granados L; Zheng J; Tang S; Lin B.-H; HUNG-WEI YEN ; McCamey D.R; Kennedy B.J; Chueh C.-C; CHU-CHEN CHUEH et al. | Advanced Materials | 22 | 21 | |
58 | 2012 | Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel | Yen, Hung-Wei ; Huang, Mingxin; Scott, C.P.; Yang, Jer-Ren | Scripta Materialia | 87 | 79 | |
59 | 2024 | Interphase Precipitation in Cold-Rolled Dual-Phase Steel Strip: Design and Challenges | Lu, Shao-Lun; Hsu, Ya Lan; Chen, Yi Sheng; Yang, Kuo Cheng; HUNG-WEI YEN | Steel Research International | |||
60 | 2011 | Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel | Yen, Hung-Wei ; Chen, Po-Yu; Huang, Ching-Yuan; Yang, Jer-Ren | Acta Materialia | 279 | 229 | |
61 | 2023 | Investigation of Microstructure and Wear Properties of Precipitates-Strengthened Cu-Ni-Si-Fe Alloy | Peng, Chun-Hao; Hou, Po-Yu; Lin, Woei-Shyang; Shen, Pai-Keng; Huang, Hao-Hsuan; Yeh, Jien-Wei; HUNG-WEI YEN ; Huang, Cheng-Yao; Tsai, Che-Wei | Materials (Basel, Switzerland) | 2 | 1 | |
62 | 2013 | Knowledge contribution in information system development teams: An empirical research from a social cognitive perspective | Chang, Kuo-chung; Yen, Hung-Wei; Chiang, Chih-Ching; Parolia, Neeraj; HUNG-WEI YEN | International Journal of Project Management | |||
63 | 2020 | Large delta T thermal cycling induced stress accelerates equilibrium and transformation in super DSS | Yu, P.-J.; Chen, S.-C.; Yen, H.-W.; Chang, H.-Y.; Yang, J.-R.; Wang, S.-H.; Chiu, P.-K.; Lin, T.-R.; JER-REN YANG ; HUNG-WEI YEN | Crystals | |||
64 | 2017 | Large strain burst induced by martensitic transformation in austenitic micropillars | Nimaga, O.G.; Cheng, G.J.; Yen, H.W.; Huang, M.X.; HUNG-WEI YEN | Scripta Materialia | |||
65 | 1973 | Laser Oscillation in Epitaxial Gaas Waveguides with Corrugation Feedback | Nakamura, M.; Yen, Hw; Yariv, A.; Garmire, E.; Somekh, S.; Garvin, Hl; HUNG-WEI YEN | Applied Physics Letters | 87 | ||
66 | 1974 | Liquid-Phase Epitaxy of Gaalas on Gaas Substrates with Fine Surface Corrugations | Nakamura, M.; Aiki, K.; Umeda, J.; Yariv, A.; Yen, Hw; Morikawa, T.; HUNG-WEI YEN | Applied Physics Letters | 22 | ||
67 | 2015 | Low temperature bainitic ferrite: Evidence of carbon super-saturation and tetragonality | Garcia-Mateo, C.; Jimenez, J.A.; Yen, H.-W. ; Miller, M.K.; Morales-Rivas, L.; Kuntz, M.; Ringer, S.P.; Yang, J.-R. ; Caballero F.G. | Acta Materialia | 92 | 84 | |
68 | 2011 | Low-alloy duplex, directly quenched transformation-induced plasticity steel | Yi, H.L.; Ryu, J.H.; Bhadeshia, H.K.D.H.; Yen, H.W.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 36 | 31 | |
69 | 2020 | Machine learning recommends affordable new Ti alloy with bone-like modulus | Wu, C.-T.; Chang, H.-T.; Wu, C.-Y.; Chen, S.-W.; Huang, S.-Y.; Huang, M.; Pan, Y.-T.; Bradbury, P.; Chou, J.; HUNG-WEI YEN | Materials Today | 58 | 55 | |
70 | 2024 | Mechanical performance of a novel low-cost Fe–25Mn–5Co-12.5Cr–5Ni-2.5Si (in at. %) medium-entropy alloy | Lin, Kaifan; Chen, Shih Che; HUNG-WEI YEN ; HSIN-CHIH LIN | Materials Science and Engineering: A | |||
71 | 2021 | Mechanical properties and deformation mechanisms in CoCrFeMnNi high entropy alloys: A molecular dynamics study | Chen K.-T; Wei T.-J; Li G.-C; Chen M.-Y; Chen Y.-S; Chang S.-W; Yen H.-W; SHU-WEI CHANG ; HUNG-WEI YEN | Materials Chemistry and Physics | 18 | 17 | |
72 | 2021 | Mechanism of twinning induced plasticity in austenitic lightweight steel driven by compositional complexity | Lai Z.-H; Sun Y.-H; Lin Y.-T; Tu J.-F; Yen H.-W.; HUNG-WEI YEN | Acta Materialia | |||
73 | 2017 | Micromechanical behavior of single crystalline Ni 3 Sn 4 in micro joints for chip-stacking applications | Yu L.J.; Yen H.W.; Wu J.Y.; Yu J.J.; C. ROBERT KAO ; HUNG-WEI YEN | Materials Science and Engineering A | 10 | 10 | |
74 | 2018 | Microscopic origin of highly enhanced supercurrent in 122 pnictide superconductor | Zhuang, J.C.; Yeoh, W.K.; Yen, H.W.; Xu, X.; Du, Y.; Liu, H.W.; Yao, C.; Ma, Y.W.; Wang, X.L.; Ringer, S.P.; Dou, S.X.; HUNG-WEI YEN | Journal of Alloys and Compounds | |||
75 | 2020 | Microstrain and boundary misorientation evolution for recrystallized super DSS after deformation | Li, J.-S.; Cheng, G.-J.; Yen, H.-W.; Yang, Y.-L.; Chang, H.-Y.; Wu, C.-Y.; Wang, S.-H.; Yang, J.-R.; JER-REN YANG ; HUNG-WEI YEN | Materials Chemistry and Physics | |||
76 | 2019 | Microstructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes | Chen, S.-C.; Wang, Y.-T.; Lin, Y.-C.; Huang, C.-Y.; Yang, J.-R.; HUNG-WEI YEN ; JER-REN YANG | Materials Science and Engineering A | 23 | 19 | |
77 | 2022 | Microstructure and mechanical properties of medium-entropy alloys with a high-density η-D024 phase | Shen P.-K; Liu H.-C; Huang C.-Y; Yen H.-W; Yeh J.-W; Tsai C.-W.; HUNG-WEI YEN | Materials Characterization | |||
78 | 2019 | Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4?PH stainless steel | Hsu, T.-H.; Chang, Y.-J.; Huang, C.-Y.; Yen, H.-W.; Chen, C.-P.; Jen, K.-K.; Yeh, A.-C.; HUNG-WEI YEN | Journal of Alloys and Compounds | |||
79 | 2022 | Mobility Enhancement in P-Type SnO Thin-Film Transistors via Ni Incorporation by Co-Sputtering | Hsu S.-M; Yang C.-E; Lu M.-H; Lin Y.-T; Yen H.-W; I-CHUN CHENG ; HUNG-WEI YEN | IEEE Electron Device Letters | 5 | 5 | |
80 | 2017 | Modulation of magnetic anisotropy through self-assembled surface nanoclusters: Evolution of morphology and magnetism in Co�VPd alloy films | Hsu, C.-C.; Chiu, H.-C.; Mudinepalli, V.R.; Chen, Y.-C.; Chang, P.-C.; Wu, C.-T.; Yen, H.-W.; Lin, W.-C.; HUNG-WEI YEN | Applied Surface Science | |||
81 | 2020 | Nanoscale compositional fluctuations enabled by dynamic strain-induced austenite reversion in a Mn-rich duplex steel | Cheng, G.-J.; Lilensten, L.; Huang, C.-Y.; Gault, B.; Yen, H.-W.; HUNG-WEI YEN | Scripta Materialia | 5 | ||
82 | 2008 | Nanostructural analysis of a GaN-based violet laser diode | Yang, J. R.; Tsai, H. L.; Wang, T. Y.; Yen, H. W.; Chen, C. Y.; Li, W. C.; HUNG-WEI YEN ; JER-REN YANG | Surface Review and Letters | 0 | 0 | |
83 | 2020 | New approaches in understanding the effects of hydrogen trapping and the fishscaling resistance of enameled steels | Lin, Y.-T.; Chiang, L.-J.; Lin, Y.-C.; Yen, H.-W.; HUNG-WEI YEN | Surface and Coatings Technology | 4 | ||
84 | 2020 | New protocol for orientation reconstruction from martensite to austenite in steels | Huang, C.-Y.; Ni, H.-C.; Yen, H.-W.; HUNG-WEI YEN | Materialia | |||
85 | 2022 | On the mechanism of Mn partitioning during intercritical annealing in medium Mn steels | Guo Q; Yen H.-W; Luo H; Ringer S.P.; HUNG-WEI YEN | Acta Materialia | |||
86 | 2014 | On the roles of graphene oxide doping for enhanced supercurrent in MgB <inf>2</inf> based superconductors | Yeoh, W.K.; Cui, X.Y.; Gault, B.; De Silva, K.S.B.; Xu, X.; Liu, H.W.; Yen, H.-W.; Wong, D.; Bao, P.; Larson, D.J.; Martin, I.; Li, W.X.; Zheng, R.K.; Wang, X.L.; Dou, S.X.; Ringer, S.P.; HUNG-WEI YEN | Nanoscale | |||
87 | 2015 | On the universality of Suzuki segregation in binary Mg alloys from first principles | Cui, X.-Y.; Yen, H.-W.; Zhu, S.-Q.; Zheng, R.; Ringer, S.P.; HUNG-WEI YEN | Journal of Alloys and Compounds | |||
88 | 1978 | Optical Injection Locking and Switching of Transistor Oscillators | Yen, Hw; Barnoski, Mk; HUNG-WEI YEN | Applied Physics Letters | |||
89 | 1980 | Optical-Injection Locking of Si Impatt Oscillators | Yen, Hw; HUNG-WEI YEN | Applied Physics Letters | 16 | ||
90 | 1979 | Optical-Injection Locking of Si-Impatt Oscillators | Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
91 | 1973 | Optically Pumped Gaas Surface Laser with Corrugation Feedback | Nakamura, M.; Yariv, A.; Yen, Hw; Somekh, S.; Garvin, Hl; HUNG-WEI YEN | Applied Physics Letters | 140 | ||
92 | 2018 | Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite | Liu, L.; He, B.B.; Cheng, G.J.; Yen, H.W.; Huang, M.X.; HUNG-WEI YEN | Scripta Materialia | |||
93 | 2010 | Orientation relationship transition of nanometre sized interphase precipitated TiC carbides in Ti bearing steel | Yen, H.W.; Chen, C.Y.; Wang, T.Y.; Huang, C.Y.; HUNG-WEI YEN ; JER-REN YANG | Materials Science and Technology | 80 | 69 | |
94 | 2017 | The origin and mitigation of volcano-like morphologies in micron-thick AlGaN/AlN heteroepitaxy | Huang, C.-Y.; Chang, K.-S.; Huang, C.-Y.; Lin, Y.-H.; Peng, W.-C.; Yen, H.-W.; Lin, R.-M.; Kuo, H.-C.; HUNG-WEI YEN | Applied Physics Letters | |||
95 | 2009 | Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides | Chen, C.Y.; Yen, H.W.; Kao, F.H.; Li, W.C.; Huang, C.Y.; Yang, J.R.; HUNG-WEI YEN ; JER-REN YANG | Materials Science and Engineering A | 238 | 192 | |
96 | 2014 | Resolving the morphology of niobium carbonitride nano-precipitates in steel using atom probe tomography | Breen, A.J.; Xie, K.Y.; Moody, M.P.; Gault, B.; Yen, H.-W.; Wong, C.C.; Cairney, J.M.; Ringer, S.P.; HUNG-WEI YEN | Microscopy and Microanalysis | |||
97 | 2019 | Response of Hydrogen Desorption and Hydrogen Embrittlement to Precipitation of Nanometer-Sized Copper in Tempered Martensitic Low-Carbon Steel | Lin Y.-C.; Chen D.; Chiang M.-H.; Cheng G.-J.; HSIN-CHIH LIN ; HUNG-WEI YEN | JOM | 18 | 16 | |
98 | 2019 | Revealing orientation-dependent martensitic transformation in amedium Mn steel by micropillar compression | Nimaga, O.G.; He, B.B.; Cheng, G.J.; Yen, H.W.; Huang, M.X.; HUNG-WEI YEN | International Journal of Plasticity | |||
99 | 2023 | Revealing the intensified preferred orientation and factors dominating the anisotropic mechanical properties of laser powder bed fusion Ti‐6Al‐4V alloy after heat treatment | Wu, Ming Wei; Ni, Kai; HUNG-WEI YEN ; Chen, Jhewn Kuang; Wang, Pei; Tseng, Yu Jen; Tsai, Mo Kai; Wang, Shih Hao; Lai, Pang Hsin; Ku, Ming Hsiang | Journal of Alloys and Compounds | 6 | 2 | |
100 | 2024 | Revealing the roles of martensitic transformation in affecting the fatigue resistance of austenitic stainless steel with heterogeneous grain size distribution | Li, W. P.; He, B. B.; Sun, Y. H.; HUNG-WEI YEN ; Huang, M. X.; Jiang, C. | Scripta Materialia | |||
101 | 2018 | Reversible 90-Degree Rotation of Fe Magnetic Moment Using Hydrogen | Hsu, C.-C.; Chang, P.-C.; Chen, Y.-H.; Liu, C.-M.; Wu, C.-T.; Yen, H.-W.; Lin, W.-C.; HUNG-WEI YEN | Scientific Reports | |||
102 | 2022 | Revisiting alloy design of low-modulus biomedical β-Ti alloys using an artificial neural network | Wu C.-T; Lin P.-H; Huang S.-Y; Tseng Y.-J; Chang H.-T; Li S.-Y; Yen H.-W.; HUNG-WEI YEN | Materialia | |||
103 | 2019 | The Role of Plastic Strain on the Delayed Fracture Behavior of Twinning-Induced Plasticity Steels | Luo, Z.C.; Liu, R.D.; Wang, X.; Yen, H.W.; Huang, M.X.; HUNG-WEI YEN | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | |||
104 | 2015 | Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels | Yen, H.-W.; Ooi, S.W.; Eizadjou, M.; Breen, A.; Huang, C.-Y.; Bhadeshia, H.K.D.H.; Ringer, S.P.; HUNG-WEI YEN | Acta Materialia | |||
105 | 2020 | Role of the crystallographic texture in anisotropic mechanical properties of a newly-developed hot-rolled TRIP steel | Chen, S.-C.; Huang, C.-Y.; Wang, Y.-T.; Huang, C.-Y.; Yen, H.-W.; HUNG-WEI YEN | Materials Science and Engineering A | 19 | ||
106 | 2021 | Role of Vanadium Carbide in Hydrogen Embrittlement of Press-Hardened Steels: Strategy From 1500 to 2000?MPa | Lin Y.-T; Yi H.L; Chang Z.Y; Lin H.-C; HSIN-CHIH LIN ; HUNG-WEI YEN | Frontiers in Materials | 12 | 12 | |
107 | 1976 | Room-Temperature Operation of Gaas Bragg-Mirror Lasers | Ng, W.; Yen, Hw; Katzir, A.; Samid, I.; Yariv, A.; HUNG-WEI YEN | Applied Physics Letters | 30 | ||
108 | 2014 | Secondary hardened bainite | Huang, B.M.; Yang, J.R.; Yen, H.W.; Hsu, C.H.; Huang, C.Y.; HUNG-WEI YEN ; JER-REN YANG | Materials Science and Technology (United Kingdom) | 32 | 25 | |
109 | 2024 | Semi in-situ investigations on deformation-induced micro-damage in high-strength dual-phase steels | Tseng, Min Yu; Chao, Ying Chun; Hu, Yi Fan; SHAO-LUN LU ; Yang, Kou Cheng; Zhu, Kangying; HUNG-WEI YEN | Materials Characterization | |||
110 | 2017 | Spin-Orbit Torque from a Magnetic Heterostructure of High-Entropy Alloy | Chen, T.-Y.; Chuang, T.-C.; Huang, S.-Y.; Yen, H.-W.; CHI-FENG PAI ; SSU-YEN HUANG ; HUNG-WEI YEN | Physical Review Applied | 2 | 2 | |
111 | 2023 | Strategy of complex carbides in microalloyed 4Mn steels processed by quenching and austenite reversion | SHAO-LUN LU ; Yang, Shan Chun; Zhu, Kangying; Chen, Yi Sheng; Cairney, Julie M.; Lin, Chun Ming; HUNG-WEI YEN | Materials and Design | 0 | 1 | |
112 | 1980 | Studies of (gaal)as Injection-Lasers Operating with an Optical Fiber Resonator | Figueroa, L.; Lau, Ky; Yen, Hw; Yariv, A.; HUNG-WEI YEN | Journal of Applied Physics | 17 | ||
113 | 2024 | Study on surface hydrogenated Ti6Al4V alloy for orthopedic implants | Lin, Yu Chien; Hu, Chih Chien; Nguyen, Thu Trang; Dhawan, Udesh; Chou, Ching Yi; YUEH-LIEN LEE ; HUNG-WEI YEN ; Kuo, Yi Jie; Chung, Ren Jei | Journal of Materials Research and Technology | |||
114 | 2010 | Substructures of martensite in Fe-1C-17Cr stainless steel | Lee, Hsin-Yi; Yen, Hung-Wei ; Chang, Hsiao-Tzu; Yang, Jer-Ren | Scripta Materialia | 28 | 26 | |
115 | 2019 | Super-high-strength and formable medium Mn steel manufactured by warm rolling process | Hu, B.; He, B.; Cheng, G.; Yen, H.; Huang, M.; Luo, H.; HUNG-WEI YEN | Acta Materialia | |||
116 | 1977 | Switching of Gaas Impatt Diode Oscillator by Optical Illumination | Yen, Hw; Barnoski, Mk; Hunsperger, Rg; Melville, Rt; HUNG-WEI YEN | Applied Physics Letters | 44 | ||
117 | 2007 | Sympathetic nucleation of austenite in a Fe-22Cr-5Ni duplex stainless steel | Chen, C.Y.; Yen, H.W.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 25 | 21 | |
118 | 2023 | The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel | Wu, Ming Wei; Ku, Shu Wei; HUNG-WEI YEN ; Ku, Ming Hsiang; Chang, Shih Hsien; Ni, Kai; Shih, Zih Sin; Tsai, Chuan; Hsu, Ta Wei; Li, Chien Lun; Wang, Chih Kai | Materials Science and Engineering: A | 0 | ||
119 | 2022 | Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures | Liu, CJ; Gadelmeier, C; SHAO-LUN LU ; Yeh, JW; HUNG-WEI YEN ; Gorsse, S; Glatzel, U; Yeh, AC | ACTA MATERIALIA | 14 | 14 | |
120 | 2015 | Tensile Response of Two Nanoscale Bainite Composite-Like Structures | Morales-Rivas, L.; HUNG-WEI YEN ; Huang, B.-M.; Kuntz, M.; Caballero, F.G.; JER-REN YANG ; Garcia-Mateo, Carlos | JOM | 47 | 43 | |
121 | 2019 | Theranostic Iron@Gold Core–Shell Nanoparticles for Simultaneous Hyperthermia-Chemotherapy upon Photo-Stimulation | Li, Y.; Dhawan, U.; Wang, H.-Y.; Liu, X.; Ku, H.-H.; Tsai, M.-T.; Yen, H.-W.; Chung, R.-J.; HUNG-WEI YEN | Particle and Particle Systems Characterization | |||
122 | 2019 | Thermal cycling induced stress–assisted sigma phase formation in super duplex stainless steel | Li, J.-S.; Cheng, G.-J.; Yen, H.-W.; Wu, L.T.; Yang, Y.-L.; Wu, R.T.; Yang, J.-R. ; Wang, S.-H.; HUNG-WEI YEN | Materials and Design | |||
123 | 2014 | Three phase crystallography and solute distribution analysis during residual austenite decomposition in tempered nanocrystalline bainitic steels | Caballero, F.G.; Yen, H.-W.; Miller, M.K.; Cornide, J.; Chang, H.-T.; Garcia-Mateo, C.; HUNG-WEI YEN ; JER-REN YANG | Materials Characterization | 21 | 16 | |
124 | 2013 | The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel | Chen, M.-Y.; Yen, H.-W.; HUNG-WEI YEN ; JER-REN YANG | Scripta Materialia | 26 | 25 | |
125 | 2017 | Tunable spin-orbit torque in Cu-Ta binary alloy heterostructures | Chen, T.-Y.; Wu, C.-T.; Yen, H.-W.; CHI-FENG PAI ; HUNG-WEI YEN | Physical Review B | 37 | 33 | |
126 | 2021 | Ultrafast formation of single phase B2 AlCoCrFeNi high entropy alloy films by reactive Ni/Al multilayers as heat source | Wang A; HUNG-WEI YEN | Materials and Design | |||
127 | 2023 | Understanding the passive behaviour of low-chromium high-strength Hybrid steel in corrosive environments | Örnek, Cem; Payam, Beste; Gloskovskii, Andrei; Kazmanlı, Kürşat; Mohamed, Nourhan; Derin, Bora; Ürgen, Mustafa; Chou, Chin En; HUNG-WEI YEN ; Avcı, Burçak; Ooi, Steve | npj Materials Degradation | 0 | 0 | |
128 | 2022 | Verification of the ability of Cu to dissolve in BCC δ in a δ-γ Solid Solution above 1200 °C and boosting δ nano-hardness in Cu-containing PHSS | Hsueh C.-H; Sun Y.-H; Tsao T.-C; Li C.-L; Liu J.-H; HUNG-WEI YEN ; Hsueh C.-H; JER-REN YANG ; Wang S.-H; Yeh J.-W; Chang H.-Y; CHUN-HWAY HSUEH | Scripta Materialia | 4 | 3 | |
129 | 2018 | Warm ductility enhanced by austenite reversion in ultrafine-grained duplex steel | Cheng, G.-J.; Gault, B.; Huang, C.-Y.; Huang, C.-Y.; Yen, H.-W.; HUNG-WEI YEN | Acta Materialia |