第 1 到 180 筆結果,共 180 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2023 | Non-integral depth measurement of high-aspect-ratio multi-layer microstructures using numerical-aperture shaped beams | Chein, Wei Hsin; Yang, Fu Sheng; Thakur, Komal; Wu, Guo Wei; LIANG-CHIA CHEN | Optics and Lasers in Engineering | 1 | 0 | |
2 | 2023 | Non-integral model-based scatterometry for CD metrology of single high-aspect-ratio microstructures | Chein, Wei Hsin; Yang, Fu Sheng; Fu, Zi Ying; LIANG-CHIA CHEN | Surface Topography: Metrology and Properties | 0 | 0 | |
3 | 2023 | Full-field chromatic confocal microscopy for surface profilometry with sub-micrometer accuracy | Chen, Hong Ruei; LIANG-CHIA CHEN | Optics and Lasers in Engineering | 3 | 2 | |
4 | 2023 | AI-guided OCD metrology for single HAR sub-micron via measurement | Yang, Fu Sheng; Fu, Zih Ying; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
5 | 2023 | Signal Processing and Artificial Intelligence for Dual-Detection Confocal Probes | Sato, Ryo; Li, Xinghui; Fischer, Andreas; LIANG-CHIA CHEN ; Chen, Chong; Shimomura, Rintaro; Gao, Wei | International Journal of Precision Engineering and Manufacturing | 0 | 0 | |
6 | 2023 | 3-D optical microscopy with a new synthetic SFF algorithm to reconstruct surfaces with various specular and diffusive reflectance | Chen, Yu Sheng; LIANG-CHIA CHEN | International Journal of Advanced Manufacturing Technology | 1 | 1 | |
7 | 2023 | AI-guided optical-model-based superresolution for semiconductor CD metrology | Lee, Wei Yun; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
8 | 2023 | Non-integral model-based scatterometry for single-structure OCD metrology | Chein, Wei Hsin; Yang, Fu Sheng; Fu, Zi Ying; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | ||
9 | 2023 | AI-guided numerical-aperture-controlled scatterometry for measurement of deep HAR and thin-film structures with a large depth variation | Fu, Zih Ying; Yang, Fu Sheng; Wu, Min Ru; Hung, Yen Hung; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | ||
10 | 2023 | Artificial-neural-network-assisted DUV scatterometry for OCD on HAR submicron structures | Fu, Zih Ying; Chein, Wei Hsin; Yang, Fu Sheng; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
11 | 2022 | New critical dimension optical metrology for submicron high-aspect-ratio structures using spectral reflectometry with supercontinuum laser illumination | Chein, Wei Hsin; Yang, Fu Sheng; Thakur, Komal; Wu, Guo Wei; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 2 | 0 | |
12 | 2022 | Accuracy-enhanced diffraction image profilometry using foreign aberration for resolving image ambiguity | Wu, Guo Wei; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
13 | 2021 | High-speed chromatic confocal microscopy using multispectral sensors for sub-micrometer-precision microscopic surface profilometry | Chen L.-C; Tan P.-J; Wu G.-W; Lin C.-J; Nguyen D.T.; LIANG-CHIA CHEN | Measurement: Sensors | |||
14 | 2021 | Precise 3-D microscopic profilometry using diffractive image microscopy and artificial neural network in single-exposure manner | Wu G.-W; Chen L.-C.; LIANG-CHIA CHEN | Optics and Lasers in Engineering | |||
15 | 2021 | Automated optical inspection system for o-ring based on photometric stereo and machine vision | Yang F.-S; Ho C.-C; Chen L.-C.; LIANG-CHIA CHEN | Applied Sciences (Switzerland) | |||
16 | 2021 | An insight into optical metrology in manufacturing | Shimizu Y; Chen L.-C; Kim D.W; Chen X; Li X; Matsukuma H.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
17 | 2020 | Study on the transient response to the point-to-point motion controls on a dual-axes air-bearing planar stage | Kuo, F.-C.; Hsu, C.; Hsieh, M.-R.; Yen, J.-Y.; Chen, L.-C.; Chung, T.-T.; JIA-YUSH YEN ; FU-CHENG WANG ; LIANG-CHIA CHEN | International Journal of Advanced Manufacturing Technology | 3 | 2 | |
18 | 2019 | Absolute depth measurement using multiphase normalized cross-correlation for precise optical profilometry | Duong, D.-H.; Chen, C.-S.; LIANG-CHIA CHEN | Sensors (Switzerland) | |||
19 | 2019 | Precise microscopic profilometry using diffractive image correlation and theoretical model simulation | Wu, G.-W.; Jiang, M.-J.; Chen, L.-C.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
20 | 2019 | Investigation and mapping strategy on influence of surface tilting in diffractive pattern correlation profilometry | Wu, G.-W.; Jiang, M.-J.; Chen, L.-C.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
21 | 2019 | Novel chromatic confocal differential interference contrast prototype | Belkner, J.; Liu, H.-W.; Manske, E.; Chen, L.-C.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
22 | 2019 | Novel Range Image Segmentation Using Region-Growing and Surface Classification | 運用區域成長及表面分類之創新三維影像分割技術 | Chen, L.-C.; Liang, C.-W.; Nguyen, X.-L.; Lin, S.-T.; LIANG-CHIA CHEN | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
23 | 2019 | Optical 3-D profilometry for measuring semiconductor wafer surfaces with extremely variant reflectivities | Chen, L.-C.; Duong, D.-H.; Chen, C.-S.; LIANG-CHIA CHEN | Applied Sciences (Switzerland) | |||
24 | 2019 | Full-field microsurface profilometry using image correlation without vertical scanning | Wu, G.-W.; Nguyen, D.T.; Chen, L.-C.; LIANG-CHIA CHEN | Optics Letters | |||
25 | 2019 | A novel surface descriptor for automated 3-D object recognition and localization | Chen, L.-C.; Nguyen, T.-H.; LIANG-CHIA CHEN | Sensors (Switzerland) | |||
26 | 2019 | Robot-based 3-D machine vision using circular-feature normal estimation and multi-dimensional image fusion | Chen, L.-C.; Le, M.-T.; Lin, C.-J.; LIANG-CHIA CHEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM | |||
27 | 2019 | Special issue on precision dimensional measurements | Fan, K.-C.; Chen, L.-C.; LIANG-CHIA CHEN | Applied Sciences (Switzerland) | |||
28 | 2018 | A Novel Feature Detection Method Using Multi-Dimensional Image Fusion for Automated Optical Inspection on Critical Dimension | 陳亮嘉(Liang-Chia Chen); 梁景文(Ching-Wen Liang); 黃庭強(Dinh-Cuong Hoang); 楊德孝(Duc-Hieu Duong); 陳金聖(Chin-Sheng Chen); 林世聰(Shyh-Tsong Lin); 陳亮嘉 | 中國機械工程學刊 | |||
29 | 2018 | Dose-related ethanol intake, Cx43 and Nav1.5 remodeling: Exploring insights of altered ventricular conduction and QRS fragmentation in excessive alcohol users | Hung, C.-L.; Lai, Y.-J.; Chi, P.-C.; Chen, L.-C.; Tseng, Y.-M.; Kuo, J.-Y.; Lin, C.-I.; Chen, Y.-C.; Lin, S.-J.; Yeh, H.-I.; LIANG-CHIA CHEN | Journal of Molecular and Cellular Cardiology | |||
30 | 2018 | "Confocal microscopy for surface profilometry" Book chapter, Metrology, Springer | Liang-Chia Chen; LIANG-CHIA CHEN | ||||
31 | 2018 | Novel boundary edge detection for accurate 3d surface profilometry using digital image correlation | Chen, L.-C.; LIANG-CHIA CHEN | Applied Sciences (Switzerland) | 3 | 3 | |
32 | 2018 | Corrigendum to “Dose-related ethanol intake, Cx43 and Nav1.5 remodeling: Exploring insights of altered ventricular conduction and QRS fragmentation in excessive alcohol users” [J. Mol. Cell. Cardiol. 114 (2018) 150–160](S0022282817303358)(10.1016/j.yjmcc.2017.10.011) | Hung, C.-L.; Lai, Y.-J.; Chi, P.-C.; Chen, L.-C.; Tseng, Y.-M.; Kuo, J.-Y.; Lin, C.-I.; Chen, Y.-C.; Lin, S.-J.; Yeh, H.-I.; LIANG-CHIA CHEN | Journal of Molecular and Cellular Cardiology | |||
33 | 2018 | A Novel Feature Detection Method Using Multi-Dimensional Image Fusion for Automated Optical Inspection on Critical Dimension [適用於關鍵尺寸自動光學檢測的創新多維融合圖像特徵偵測方法] | Chen L.-C; Liang C.-W; Hoang D.-C; Duong D.-H; Chen C.-S; Lin S.-T.; LIANG-CHIA CHEN | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
34 | 2017 | Focus Probe Technique for Edge Detection and Linewidth Measurement of Microstructures with Nanometer Resolution | 范光照(Kuang-Chao Fan); 林器躉(Chi-Duen Lin); 李瑞君(Ruijun Li); 陳亮嘉(Liang-Chia Chen); Yuri Chugui; 陳亮嘉 | 中國機械工程學刊 | |||
35 | 2017 | Reconstruction of accurate 3-D surfaces with sharp edges using digital structured light projection and multi-dimensional image fusion | Le, M.-T.; Chen, L.-C.; Lin, C.-J.; LIANG-CHIA CHEN | Optics and Lasers in Engineering | |||
36 | 2017 | Differential interference contrast microscopy using Savart plates | Trnh, H.-X.; Lin, S.-T.; Chen, L.-C.; Yeh, S.-L.; Chen, C.-S.; LIANG-CHIA CHEN | Journal of Optics (United Kingdom) | |||
37 | 2017 | Shearing interference microscope for step-height measurements | Tr?nh, H.-X.; Lin, S.-T.; Chen, L.-C.; Yeh, S.-L.; Chen, C.-S.; Hoang, H.-H.; LIANG-CHIA CHEN | Journal of Microscopy | |||
38 | 2017 | Technological advances in measurements and intelligent instrumentation | Chen, L.-C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
39 | 2017 | Sub-OBB based object recognition and localization algorithm using range images | Hoang, D.-C.; Chen, L.-C.; Nguyen, T.-H.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
40 | 2017 | Accurate submicron edge detection using the phase change of a nano-scale shifting laser spot | Hai, H.H.; Chen, L.-C.; Nguyen, D.T.; Lin, S.-T.; Yeh, S.L.; Yao, Y.; LIANG-CHIA CHEN | Optics and Laser Technology | |||
41 | 2016 | Development of Registration methodology to 3-D Point Clouds in Robot Scanning | Chen, L.-C.; Hoang, D.-C.; Chu, T.-T.; Lin, H.-I.; LIANG-CHIA CHEN | MATEC Web of Conferences | |||
42 | 2016 | Innovative methodology for multi-view point clouds registration in robotic 3-D object scanning and reconstruction | Liang-Chia Chen; Dinh-Cuong Hoang; Hsien-I Lin; Thanh-Hung Nguyen; LIANG-CHIA CHEN | Applied sciences-Basel | |||
43 | 2016 | A 3-D point clouds scanning and registration methodology for automatic object digitization | Chen, L.-C.; Hoang, D.-C.; Lin, H.-I.; Nguyen, T.-H.; LIANG-CHIA CHEN | Smart Science | |||
44 | 2016 | Precise optical surface profilometry using innovative chromatic differential confocal microscopy | Chen, L.-C.; Nguyen, D.T.; Chang, Y.-W.; LIANG-CHIA CHEN | Optics Letters | |||
45 | 2016 | Innovative methodology for multi-view point cloud registration in robotic 3D object scanning and reconstruction | Chen, L.-C.; Hoang, D.-C.; Lin, H.-I.; Nguyen, T.-H.; LIANG-CHIA CHEN | Applied Sciences | |||
46 | 2015 | Newton interferometer with phase-shifting and phase-scanning measurement modes | Tr?nh, H.-X.; Lin, S.-T.; Chen, L.-C.; Yeh, S.-L.; Hoang, H.-H.; LIANG-CHIA CHEN | Sensors and Actuators, A: Physical | |||
47 | 2015 | Full-fied Measurement of Deformation and Vibration using Digital Image Correlation | Chen, Liang-Chih; Chang, Ching-Yuan; Lee, Wei-Chen; CHIEN-CHING MA ; LIANG-CHIA CHEN | Smart Science | 5 | 0 | |
48 | 2015 | 3-D surface profilometry for objects having extremely different reflectivity regions | Chen, L.-C.; Duong, D.-H.; Chen, C.-S.; LIANG-CHIA CHEN | 2015 IFToMM World Congress | |||
49 | 2015 | Preface | Chen, L.-C.; Fan, K.-C.; LIANG-CHIA CHEN | Key Engineering Materials | |||
50 | 2015 | Measuring full-field deformation and vibration using digital image correlation | Chang, C.Y.; Chen, L.C.; Lee, W.C.; CHIEN-CHING MA ; LIANG-CHIA CHEN | 2015 IFToMM World Congress Proceedings | 1 | 0 | |
51 | 2015 | Viewpoint-independent 3D object segmentation for randomly stacked objects using optical object detection | Chen, L.-C.; Nguyen, T.-H.; Lin, S.-T.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
52 | 2014 | 自動化光學檢測 (ISBN:978-986-378-009-0) | 陳亮嘉主編; 邱奕契共編; 范光照共編; 陳金聖共編; LIANG-CHIA CHEN | 自動化光學檢測 | |||
53 | 2014 | 3-D Full-field Surface Profilometry Using Synthesis of Random-Speckle and Structured-Fringe Projection for Automated Optical Inspection (AOI | Liang-Chia Chen; Chung-An Hsieh; Thanh-Hung Nguyen; LIANG-CHIA CHEN | ISPEMI 2014, China, Aug 2014. (受邀擔任 invited speaker) | |||
54 | 2014 | Fourier transform profilometry employing novel orthogonal elliptic band-pass filtering for accurate 3-D surface reconstruction | Chen, L.-C.; Hai, H.H.; LIANG-CHIA CHEN | Precision Engineering | |||
55 | 2014 | In-situ volumetric topography of IC chips for defect detection using infrared confocal measurement with active structured light | Chen, L.-C.; Le, M.-T.; Phuc, D.C.; Lin, S.-T.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
56 | 2014 | Polarization phase-shifting Newton interferometer without errors caused by polarization crosstalk | Trinh, H.-X.; Lin, S.-T.; Chen, L.-C.; Yeh, S.-L.; LIANG-CHIA CHEN | Sensors and Actuators, A: Physical | |||
57 | 2014 | 3-D micro surface profilometry employing novel Mirau-based lateral scanning interferometry | Chen, L.-C.; Le, M.-T.; Lin, Y.-S.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
58 | 2014 | Technological evolution and developing trend of in-situ AOI on macro-, micro- and nano-scale 3-D profilometric technologies | Liang-Chia Chen; LIANG-CHIA CHEN | EUSPEN 2014 (歐洲精密工程研討會) 擔任 Keynote Talk | |||
59 | 2014 | In situ clouds-powered 3-D radiation detection and localization using novel color-depth-radiation (CDR) mapping | Chen, L.-C.; Van Thai, N.; Shyu, H.-F.; Lin, H.-I.; LIANG-CHIA CHEN | Advanced Robotics | |||
60 | 2014 | 1. Precision Engineering and Nanotechnology V 2. Key Engineering Materials Vol. 625 | 陳亮嘉主編; LIANG-CHIA CHEN | ||||
61 | 2014 | Geometrical vision measurement in mechanical engineering | Zhou, F.; Zappa, E.; Chen, L.-C.; LIANG-CHIA CHEN | Advances in Mechanical Engineering | |||
62 | 2014 | Latest advances in nano- & micro-scale 3-D surface profilometric technologies for in-situ automated optical inspection (AOI) | Liang-Chia Chen; LIANG-CHIA CHEN | International Measurement Confederation (國際量測聯邦): 11th IMEKO (LMPMI) 2014 (2-5 Sep), 擔任 Keynote Talk | |||
63 | 2014 | Development of in-situ one-shot confocal surface profilometry using double-slit chromatic differential confocal microscopy (CDCM | Liang-Chia Chen; Jiun-Da Lin; Kuang-Chao Fan; LIANG-CHIA CHEN | Laser Optics 2014 (30-June~ 4-July) | |||
64 | 2014 | Development of micro/nano-scale optical profilometric techniques for freform and off-axis axisymetric surfaces | Liang-Chia Chen; LIANG-CHIA CHEN | ASPE(美國精密工程學會)-ASPEN Summer Topical Meeting (June 26 – 27), Invited talk. | |||
65 | 2014 | Multi-function optical characterization and inspection of MEMS components using stroboscopic coherence scanning interferometry | Tapilouw, A.M.; Chen, L.-C.; Xuan-Loc, N.; Chen, J.-L.; LIANG-CHIA CHEN | Advanced Optical Technologies | |||
66 | 2013 | Novel 3-D object recognition methodology employing curvature-based histogram | Liang-Chia Chen; Hoang Hong Hai; Xuan-Loc Nguyen; Hsiao-Wen Wu; LIANG-CHIA CHEN | Int. J. of Advanced Robotic Systems | |||
67 | 2013 | 2013 IEEE 22nd International Symposium on Industrial Electronics (ISIE) | Liang-Chia Chen; Nguyen Van Thai; Hsien-I Li; LIANG-CHIA CHEN | Real-time 3-D Feature Detection and Correspondence Refinement for Indoor Environment-Mapping using RGB-D cameras | |||
68 | 2013 | Detection Methodology of Uneven Membrane Electrical Activity on Heart of Mice by Optical Mapping | Liang-Chia Chen; Yu-Jun Lai; LIANG-CHIA CHEN | IEEE Int. Symposium on Medical Measurements and applications | |||
69 | 2013 | Development of In-situ Microscopic Surface Profilometric Technology for Automated Optical Inspection in Display Manufacturing | Liang-Chia Chen; LIANG-CHIA CHEN | International display manufacturing conference, IDMC 2013 | |||
70 | 2013 | An effective image segmentation method for noisy low-contrast unbalanced background in Mura defects using balanced discrete-cosine-transfer (BDCT) | Chen, L.-C.; Chien, C.-H.; Nguyen, X.-L.; LIANG-CHIA CHEN | Precision Engineering | |||
71 | 2013 | High-speed fourier transform profilometry for reconstructing objects having arbitrary surface colours | Chen, L.-C.; LIANG-CHIA CHEN | Recent Advances in Topography Research | |||
72 | 2013 | One-Shot Microscopic Surface Profilometry Employing Differential Chromatic Confocal Microscopy | Liang-Chia Chen; Yi-Wei Chang; LIANG-CHIA CHEN | the 11th international symposium of measurement technology and intelligent instruments | |||
73 | 2013 | Novel Orthogonal Polarization Mirau Interferometer using Reflective-type Waveplate | A. M. Tapilouw; Liang-Chia Chen; Yi-Jun Jen; Shyh-Tsong Lin; Sheng-Lih Yeh; LIANG-CHIA CHEN | Optics letters | |||
74 | 2013 | Nano–scale One-shot Microscopic Surface Profilometry Employing Two-wavelength Simultaneous Phase Shifting Interferometry | Liang-Chia Chen; Phan Van Tiep; Abraham Mario Tapilouw; Shyh-Tsong Lin; Sheng-Lih Yeh; Pham Hong Tua; LIANG-CHIA CHEN | the 7th International Conference on Photonics and Applications (ICPA-7) | |||
75 | 2013 | Chromatic confocal surface profilometry employing signal recovering methodology for simultaneously resolving lateral and axial cross talk problems | Chen, L.-C.; Lin, T.-Y.; Chang, Y.-W.; Lin, S.-T.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
76 | 2013 | Portable measurement system for static and dynamic characterization of MEMS component | Wu, H.-W.; Chen, L.-C.; Tapilouw, A.M.; Nguyen, X.-L.; Chen, J.-L.; LIANG-CHIA CHEN | Lecture Notes in Electrical Engineering | |||
77 | 2013 | Development of Novel Orthogonal Polarization Mirau Interferometry for Nanometer-scale Surface Profilometry | Abraham Mario Tapilouw; Liang-Chia Chen; Yi-Jun Jen; Shyh-Tsong Lin; Sheng-Lih Yeh; LIANG-CHIA CHEN | icOPEN2013 - the International Conference on Optics in Precision Engineering and Nanotechnology | |||
78 | 2013 | Novel 3-D object recognition methodology employing a curvature-based histogram regular paper | Chen, L.-C.; Hai, H.H.; Nguyen, X.L.; Wu, H.-W.; LIANG-CHIA CHEN | International Journal of Advanced Robotic Systems | |||
79 | 2013 | Orthogonal polarization Mirau interferometer using reflective-type waveplate | Tapilouw, A.M.; Chen, L.-C.; Jen, Y.-J.; Lin, S.-T.; Yeh, S.-L.; LIANG-CHIA CHEN | Optics Letters | |||
80 | 2013 | In-situ indoor 3-D land mapping and radioactive source localization | Thai, N.V.; Chen, L.-C.; LIANG-CHIA CHEN | 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing | |||
81 | 2013 | Theoretical simulation and experimental confirmation of duty cycle effect on stroboscopic white light interferometry for M(O)EMS dynamic characterization | Chen, L.-C.; Tapilouw, A.M.; LIANG-CHIA CHEN | Journal of Micromechanics and Microengineering | |||
82 | 2013 | Technical review and progress of recent development in optical superresolution for white light interferometry | Liang-Chia Chen; Minh-Quan Le; LIANG-CHIA CHEN | 2013 Taiwan-Russia Bilateral Symposium: Material Processing at Micro- and Nano-Levels | |||
83 | 2013 | Spectrally resolved chromatic confocal interferometry for one-shot nano-scale surface profilometry with several tens of micrometric depth range | Chen, L.-C.; Chen, Y.-S.; Chang, Y.-W.; Lin, S.-T.; Yeh, S.L.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
84 | 2013 | Real-time 3-D feature detection and correspondence refinement for indoor environment-mapping using RGB-D cameras | Chen, L.-C.; Van Thai, N.; Lin, H.-I.; LIANG-CHIA CHEN | IEEE International Symposium on Industrial Electronics | |||
85 | 2012 | In-situ scanning white light interferometry employing dual-sensing configuration and active fringe-locking strategy | Chen, L.-C.; Yeh, S.-L.; Tapilouw, A.M.; Lee, K.-F.; LIANG-CHIA CHEN | International Journal of Nanomanufacturing | |||
86 | 2012 | Automatic object detection employing viewing angle histogram for range images | Chen, L.-C.; Nguyen, X.-L.; Lin, S.-T.; LIANG-CHIA CHEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics | |||
87 | 2012 | Polarization phase-shifting Newton interferometer for plane optical surface measurements | Lin, Shyh-Tsong; Chen, Liang-Chia ; Yeh, Sheng-Lih; Trinh, Hu'ng-Xuan; Chen, Hung-Pin | Optics Letters | 4 | 4 | |
88 | 2012 | Automatic 3-D optical detection on orientation of randomly oriented industrial parts for rapid robotic manipulation | Chen, L.-C.; Le, M.-T.; Nguyen, X.-L.; LIANG-CHIA CHEN | International Journal of Automation and Smart Technology | |||
89 | 2012 | Design and characterization of band-pass filters in fourier transform profilometry for accurate 3-D surface measurement | Chen, L.-C.; Tien, I.-T.; LIANG-CHIA CHEN | 2012 IEEE International Instrumentation and Measurement Technology Conference | |||
90 | 2012 | Automatic optical detection of offset and orientation of electronic component by enhanced active shape model (EASM) | Chen, L.-C.; Van Thai, N.; Tapilouw, A.M.; LIANG-CHIA CHEN | Sensor Letters | |||
91 | 2012 | Full-field chromatic confocal surface profilometry employing DMD correspondence for minimizing lateral cross talks | Liang-Chia Chen; Yi-Wei Chang; Hau-Wei Li; LIANG-CHIA CHEN | Optical engineering | |||
92 | 2012 | In-situ scanning white light interferometry employing dual-sensing optical configuration and active fringe-locking strategy | Liang-Chia Chen; Sheng-Lih Yeh; Abraham Mario Tapilouw; Kun-Feng Lee; LIANG-CHIA CHEN | International Journal of Nanomanufacturing (IJNM) | |||
93 | 2012 | Real-time 3-D mapping for indoor environments using RGB-D cameras | Chen, L.-C.; van Thai, N.; LIANG-CHIA CHEN | Advanced Materials Research | |||
94 | 2012 | Full-field chromatic confocal surface profilometry employing digital micromirror device correspondence for minimizing lateral cross talks | Chen, L.-C.; Chang, Y.-W.; Li, H.-W.; LIANG-CHIA CHEN | Optical Engineering | |||
95 | 2011 | Dual phase-shifting moir? projection with tunable high contrast fringes for three-dimensional microscopic surface profilometry | Chen, L.-C.; Tsai, L.-H.; LIANG-CHIA CHEN | Physics Procedia | |||
96 | 2011 | Innovative image segmentation method employing fuzzy logic algorithm | Chen, L.-C.; Nguyen, X.-L.; LIANG-CHIA CHEN | 12th IASTED International Conference on Computer Graphics and Imaging | |||
97 | 2011 | Full-field chromatic confocal surface profilometry employing DMD correspondence for minimizing lateral cross talks | Chen, L.-C.; Li, H.-W.; Chang, Y.-W.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
98 | 2011 | An embedded image processing and feedback compensation for the vibration-resistance system using white light interferometer | Tseng, S.P.; Chen, L.-C.; Ho, C.; Sheng, C.-Y.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
99 | 2010 | High-Speed Fourier Transform Profilometry for reconstructing objects having arbitrary surface colours | Liang-Chia Chen; X L Nguyen; F H Zhang; LIANG-CHIA CHEN | Journal of optics | |||
100 | 2010 | Study of Ag and Au nanoparticles synthesized by Arc discharge in deionized water | LIANG-CHIA CHEN ; Tien, D.-C.; Van Thai, N.; Ashraf, S. | Journal of Nanomaterials | |||
101 | 2010 | Innovative simultaneous confocal full-field 3D surface profilometry for in situ automatic optical inspection (AOI) | Chen, L.-C.; Chang, Y.-W.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
102 | 2010 | Preparation of TiO2 nanoparticles by submerged arc nanoparticle synthesis system | Chen, L.-C.; LIANG-CHIA CHEN | Journal of Alloys and Compounds | |||
103 | 2010 | Development of innovative fringe locking strategies for vibration-resistant white light vertical scanning interferometry (VSI) | Chen, L.-C.; Tapilouw, A.M.; Yeh, S.-L.; Lin, S.-T.; Chen, J.-L.; Huang, H.-C.; LIANG-CHIA CHEN | Key Engineering Materials | |||
104 | 2010 | High-speed 3D surface profilometry employing trapezoidal phase-shifting method with multi-band calibration for colour surface reconstruction | Chen, L.C.; Liang, C.W.; Nguyen, X.L.; Shu, Y.S.; Wu, H.-W.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
105 | 2010 | Fourier transform profilometry (FTP) using an innovative band-pass filter for accurate 3-D surface reconstruction | Chen, L.-C.; Ho, H.-W.; Nguyen, X.-L.; LIANG-CHIA CHEN | Optics and Lasers in Engineering | |||
106 | 2010 | In-situ lateral confocal microscopic surface profilometry with vibration-resistance capability | Chen, L.-C.; Li, C.-K.; Chang, Y.-W.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
107 | 2010 | New 3-D Nano-scale Surface Profilometry Using Simultaneous Phase Shifting Interferometry | Liang-Chia Chen; Sheng-Lih Yeh; Abraham Mario Tapilouw; Jui-Chin Chang; LIANG-CHIA CHEN | Optics communications | |||
108 | 2010 | High-speed Fourier transform profilometry for reconstructing objects having arbitrary surface colours | Chen, L.-C.; Nguyen, X.L.; Zhang, F.-H.; Lin, T.-Y.; LIANG-CHIA CHEN | Journal of Instrumentation | |||
109 | 2010 | Dynamic surface profilometry and resonant-mode detection for microstructure characterization using nonconventional stroboscopic interferometry | Chen, L.-C.; Nguyen, X.-L.; Huang, H.-S.; Chen, J.-L.; LIANG-CHIA CHEN | IEEE Transactions on Industrial Electronics | |||
110 | 2010 | Dynamic 3D surface profilometry using a novel colour pattern encoded with a multiple triangular model | Chen, L.C.; Nguyen, X.L.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
111 | 2010 | Development of enhanced active shape model (EASM) for in-situ automatic optical inspection (AOI) | Chen, L.-C.; Tapilouw, A.M.; Van Thai, N.; LIANG-CHIA CHEN | 4th International Conference on Genetic and Evolutionary Computing | |||
112 | 2010 | 3-D surface profilometry using simultaneous phase-shifting interferometry | Chen, L.-C.; Yeh, S.-L.; Tapilouw, A.M.; Chang, J.-C.; LIANG-CHIA CHEN | Optics Communications | |||
113 | 2010 | High speed 3-D Surface Profilometry Employing Trapezoidal HSI Phase Shifting Method with Multi-band Calibration for Colour Surface Reconstruction | Liang-Chia Chen; C W Liang; X L Nguyen; Y S Shu; Hsiao-Wen Wu; LIANG-CHIA CHEN | Measurement science & technology | |||
114 | 2009 | Real-time 3-D robot vision employing novel color fringe projection | Chen, L.-C.; Nguyen, X.-L.; LIANG-CHIA CHEN | 4th International Conference on Autonomous Robots and Agents | |||
115 | 2009 | Investigation on morphology measurement and evaluation of TiO2 nanoparticles synthesized by SANSS | Chen, L.-C.; LIANG-CHIA CHEN | Journal of Alloys and Compounds | |||
116 | 2009 | High speed 3-D surface profilometry using HSI color model and trapezoidal phase-shifting method | Chen, L.-C.; Nguyen, X.-L.; Shu, Y.-S.; LIANG-CHIA CHEN | Technisches Messen | |||
117 | 2009 | A new confocal 3-D full-field surface profilometer employing image fibers for digital fringe projection | Liang-Chia Chen; Chih-Hung Huang; LIANG-CHIA CHEN | Journal of the Chinese Society of Mechanical Engineers | |||
118 | 2009 | Dynamic out-of-plane profilometry for nano-scale full-field characterization of MEMS using stroboscopic interferometry with novel signal deconvolution algorithm | Chen, L.-C.; Huang, Y.-T.; Nguyen, X.L.; Chen, J.-L.; Chang, C.-C.; LIANG-CHIA CHEN | Optics and Lasers in Engineering | |||
119 | 2009 | One-shot three-dimensional surface profilometry using DMD-based two-frequency moir? and Fourier transform technique | Liang-Chia Chen; C. H. Cho; X. L. Nguyen; LIANG-CHIA CHEN | International journal on smart sensing and intelligent systems | |||
120 | 2008 | An on-line measurement and control system for submerged arc spray synthesis of TiO <inf>2</inf> nanoparticles | Chen, L.-C.; Ji, B.-H.; LIANG-CHIA CHEN | Journal of Nanoscience and Nanotechnology | |||
121 | 2008 | High-speed 3-D machine vision employing fourier transform profilometry with digital tilting-fringe projection | Chen, L.-C.; Nguyen, X.-L.; Ho, H.-W.; LIANG-CHIA CHEN | IEEE Workshop on Advanced Robotics and its Social Impacts | |||
122 | 2008 | Submerged arc spray synthesis of TiO <inf>2</inf> nanoparticles with desired form sphericity using process characterization and optimization | Chen, L.-C.; Ho, C.-C.; LIANG-CHIA CHEN | Journal of Nanoscience and Nanotechnology | |||
123 | 2008 | Automatic TFT-LCD mura defect inspection using discrete cosine transform-based background filtering and 'just noticeable difference' quantification strategies | Chen, L.-C.; Kuo, C.-C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
124 | 2008 | An On-line Measurement and Control System for Submerged Arc Spray Synthesis of TiO2 Nanoparticles | Liang-Chia Chen; Bao-Hong Ji; LIANG-CHIA CHEN | Journal of Nanoscience and Nanotechnology | |||
125 | 2008 | Development of nanoparticle shape measurement and analysis for process characterization of TiO2 nanoparticle synthesis | Liang-Chia Chen; Chie-Chan Ho; LIANG-CHIA CHEN | Rev. Adv. Mater. Sci. | |||
126 | 2008 | Automatic TFT-LCD Mura Defect Inspection Using DCT-based Background Filtering and JND Quantification Strategies | Liang-Chia Chen; Chia-Cheng Kuo; LIANG-CHIA CHEN | Meas. Sci. Technol. | |||
127 | 2008 | Innovative automatic resonant mode identification for nano-scale dynamic full-field characterization of MEMS using interferometric fringe analysis | Chen, L.-C.; Huang, Y.-T.; Lai, H.-W.; Chen, J.-L.; Chang, C.C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
128 | 2008 | Submerged Arc Spray Synthesis of TiO2 Nanoparticles with Desired Form Sphericity Using Process Characterization and Optimization | Liang-Chia Chen; Chie-Chan Ho; LIANG-CHIA CHEN | Journal of Nanoscience and Nanotechnology | |||
129 | 2007 | A dynamic 3-D surface profilometer with nano-scale measurement resolution and MHz bandwidth for MEMS characterization | Chen, Liang-Chia ; Huang, Yao-Ting; Fan, Kuang-Chao | IEEE/ASME Transactions on Mechatronics | 32 | 28 | |
130 | 2007 | High accuracy confocal full-field 3-D surface profilometry for micro lenses using a digital fringe projection strategy | Liang-Chia Chen; Yi-Wei Chang; LIANG-CHIA CHEN | Key Engineering Materials | |||
131 | 2007 | Automatic Optical Inspection on TFT-LCD Mura Defects using Background Image Reconstruction | Liang-Chia Chen; Chia-Cheng Kuo; Ping-Lang Yen; LIANG-CHIA CHEN | Key Engineering Materials | |||
132 | 2007 | Automatic 3D surface reconstruction and sphericity measurement of micro spherical balls of miniaturized coordinate measuring probes | Chen, L.-C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
133 | 2007 | Evaluating Arc Spray Process Parameters to Synthesize Highly Spherical TiO2 Nanoparticles | Liang-Chia Chen; Chih-Hung Lo; Ho Chang; Chie-Chan Ho; LIANG-CHIA CHEN | Journal of Alloys and Compounds | |||
134 | 2007 | Evaluating arc spray process parameters to synthesize highly spherical TiO<inf>2</inf> nanoparticles | Chen, L.-C.; Lo, C.-H.; Chang, H.; Ho, C.-C.; LIANG-CHIA CHEN | Journal of Alloys and Compounds | |||
135 | 2007 | Dynamic nano-scale surface profilometry using stroboscopic interferometry | Chen, L.-C.; Lai, H.-W.; Huang, Y.-T.; Chang, J.-C.; Chang, C.C.; Chen, J.-L.; LIANG-CHIA CHEN | IECON Proceedings (Industrial Electronics Conference) | |||
136 | 2006 | Dynamic measurement of extra long stroke cylinder in the pneumatic system | Chang, H.; Lan, C.-W.; Chen, L.-C.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
137 | 2006 | Determination of Mask Opening Size in Creating Fluid Hole on Brittle Material by Double-Side Sand Blasting | Liao, Y.S.; Chen, L.C.; LiaoYS ; ChenLC | The International Journal of Advanced Manufacturing Technology | |||
138 | 2006 | Ni nano-magnetic fluid prepared by submerged arc nano synthesis system (SANSS) | Lo, C.-H.; Tsung, T.-T.; Chen, L.-C.; LIANG-CHIA CHEN | JSME International Journal, Series B: Fluids and Thermal Engineering | |||
139 | 2006 | Automatic Full-Field 3-D Profilometry Using White Light Confocal Microscopy with DMD-Based Fringe Projection | Chen, Liang Chia; Kao, Wei Chieh; Huang, Yao Ting; LIANG-CHIA CHEN | Materials Science Forum | |||
140 | 2006 | Dynamic out-of-plane profilometry for nano-scale full field characterization of MEMS with automatic detection of vibratory modes and MHz-scale measurement bandwidth | Chen, L.-C.; Lai, H.-W.; Chang, C.C.; Huang, Y.-T.; Chen, J.-L.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
141 | 2006 | High-bandwidth dynamic full-field profilometry for nano-scale characterization of MEMS | Chen, L.-C.; Huang, Y.-T.; Chang, P.-B.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
142 | 2005 | Miniaturized 3D surface profilometer using digital fringe projection | Chen, L.-C.; Huang, C.-C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
143 | 2005 | Calibration of 3D surface profilometry using digital fringe projection | Chen, L.-C.; Liao, C.-C.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
144 | 2005 | 3-D surface profilometry for both static and dynamic nano-scale full field characterization of AFM micro cantilever beams | Chen, L.-C.; Fan, K.-C.; Lin, C.-D.; Chang, C.C.; Kao, C.-F.; Chou, J.-T.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
145 | 2005 | Miniature three dimensional contour scanner | 陳亮嘉 ; 范光照 | ||||
146 | 2005 | Full-field micro surface profilometry using digital fringe projection with spatial encoding principle | Chen, L.-C.; Liao, C.-C.; Lai, M.-J.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
147 | 2005 | Development of dynamic 3-D surface profilometry using stroboscopic interferometric measurement and vertical scanning techniques | Fan, K.-C.; LIANG-CHIA CHEN ; Lin, C.-D.; Chang, C.C.; Kuo, C.-F.; Chou, Jung-Tsung | Journal of Physics: Conference Series | 9 | 0 | |
148 | 2005 | Shape-controlled synthesis of Cu-based nanofluid using submerged arc nanoparticle synthesis system (SANSS) | Lo, C.-H.; Tsung, T.-T.; Chen, L.-C.; LIANG-CHIA CHEN | Journal of Crystal Growth | |||
149 | 2005 | The electrochemical properties of SiC nanoparticle suspension | Chang, H.; Tsung, T.T.; Chen, L.C.; Jwo, C.S.; Tsung, J.W.; Lu, Y.C.; LIANG-CHIA CHEN | Journal of Materials Engineering and Performance | |||
150 | 2005 | Novel 3-D free-form surface profilometry for reverse engineering | Chen, L.-C.; Huang, Z.-X.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
151 | 2005 | Development of white light confocal microscopy with innovative fringe projection for full-field micro surface profilometry | Chen, L.-C.; Kao, W.-J.; LIANG-CHIA CHEN | 2005 IEEE International Conference on Mechatronics | |||
152 | 2005 | Fabrication and characterization of CuO nanorods by a submerged arc nanoparticle synthesis system | Lo, C.-H.; Tsung, T.-T.; Chen, L.-C.; LIANG-CHIA CHEN | Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures | |||
153 | 2005 | A study of nanoparticle manufacturing process using vacuum submerged arc machining with aid of enhanced ultrasonic vibration | Chang, H.; Tsung, T.-T.; Lo, C.-H.; Lin, H.-M.; Lin, C.-K.; Chen, L.-C.; Jwo, C.-S.; LIANG-CHIA CHEN | Journal of Materials Science | |||
154 | 2005 | The manufacture of microwave plate reflector antennas by employing the improved superplasticity hydraulic forming method | Chang, H.; Tsung, T.-T.; Chen, L.-C.; Han, L.-L.; LIANG-CHIA CHEN | Journal of Materials Processing Technology | |||
155 | 2005 | An innovative method of generating high-frequency square-like pressure wave signals | Tsung, T.T.; Chang, H.; Han, L.L.; Chen, L.C.; Yang, C.L.; LIANG-CHIA CHEN | Measurement: Journal of the International Measurement Confederation | |||
156 | 2005 | Process development and photocatalytic property of nanofluid prepared by combined ASNSS | Chang, H.; Jwo, C.S.; Lo, C.H.; Su, C.; Tsung, T.T.; Chen, L.C.; Lin, H.M.; Kao, M.J.; LIANG-CHIA CHEN | Materials Science and Technology | |||
157 | 2005 | Photodecomposition of gaseous toluene using TiO<inf>2</inf> prepared by SANSS | Jwo, C.S.; Tien, D.C.; Chen, L.C.; Teng, T.P.; Chang, H.; Lin, C.H.; Tsung, T.T.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
158 | 2005 | Using pressure square-like wave to measure the dynamic characteristics of piezoelectric pressure sensor | Han, L.-L.; Tsung, T.-T.; Chen, L.-C.; Chang, H.; Jwo, C.-S.; LIANG-CHIA CHEN | Journal of Physics: Conference Series | |||
159 | 2005 | Fabrication of copper oxide nanofluid using submerged arc nanoparticle synthesis system (SANSS) | Lo, C.-H.; Tsung, T.-T.; Chen, L.-C.; Su, C.-H.; Lin, H.-M.; LIANG-CHIA CHEN | Journal of Nanoparticle Research | |||
160 | 2005 | Nanoparticle suspension preparation using the arc spray nanoparticle synthesis system combined with ultrasonic vibration and rotating electrode | Chang, H.; Tsung, T.T.; Yang, Y.C.; Chen, L.C.; Lin, H.M.; Lin, C.K.; Jwo, C.S.; LIANG-CHIA CHEN | International Journal of Advanced Manufacturing Technology | |||
161 | 2004 | Process development of a novel arc spray nanoparticle synthesis system (ASNSS) for preparation of a TiO<inf>2</inf> nanoparticle suspension | Tsung, T.-T.; Chang, H.; LIANG-CHIA CHEN ; Liu, M.-K.; Lin, H.-M.; Lin, Chung-Kwei | International Journal of Advanced Manufacturing Technology | 12 | 10 | |
162 | 2004 | INNOVATIVE INTRA-ORAL 3-D DENTAL PROFILOMETRY | Liang-Chia Chen(陳亮嘉); Chung-Chih Huang( 黃宗治); LIANG-CHIA CHEN | Journal of Chinese Society of Mechanical Engineering | |||
163 | 2004 | Process development and material property of ZnO nanoparticle suspension by high frequency induction | Chang, H.; Tsung, T.T.; Chen, L.C.; Chen, Y.C.; Lin, H.M.; Lin, C.K.; LIANG-CHIA CHEN | JSME International Journal, Series A: Solid Mechanics and Material Engineering | |||
164 | 2004 | In-situ Measurement and Control of Electric Discharge on Submerged Arc Synthesis Process for Continuous TiO2 Nanoparticle Fabrication | Liang-Chia Chen(陳亮嘉); Sheng-Hsin Pai (白昇鑫, 研究生); LIANG-CHIA CHEN | Materials Transactions | |||
165 | 2004 | Photodecomposition and surface adsorption of methylene blue on TiO 2 nanofluid prepared by ASNSS | Chang, H.; Su, C.; Lo, C.-H.; Chen, L.-C.; Tsung, T.-T.; Jwo, C.-S.; LIANG-CHIA CHEN | Materials Transactions | |||
166 | 2004 | In-situ measurement and control of electric discharge on submerged arc synthesis process for continuous TiO<inf>2</inf> nanoparticle fabrication | Chen, L.-C.; Pai, S.-H.; LIANG-CHIA CHEN | Materials Transactions | |||
167 | 2004 | 微型三維輪廓掃描儀 | 陳亮嘉 ; 范光照 | ||||
168 | 2004 | TiO<inf>2</inf> nanoparticle suspension preparation using ultrasonic vibration-assisted Arc-submerged Nanoparticle Synthesis System (ASNSS) | Chang, H.; Tsung, T.-T.; Chen, L.-C.; Yang, Y.-C.; Lin, H.-M.; Han, L.-L.; Lin, C.-K.; LIANG-CHIA CHEN | Materials Transactions | |||
169 | 2004 | Characterization and optimization of Arc spray process parameters for synthesis of TiO<inf>2</inf> nanoparticles | Chen, L.-C.; Tsung, T.-T.; Chang, H.; Sun, J.-Y.; LIANG-CHIA CHEN | Materials Transactions | |||
170 | 2004 | Characterization and Optimization of Arc Spray Process Parameters for Synthesis of TiO2 Nanoparticles | Liang-Chia Chen; Tsing-Tshih Tsung; Ho Chang; Jen-Yan Sun; LIANG-CHIA CHEN | Materials Transactions | |||
171 | 2003 | Analysis of dynamic characteristics of pressure sensors using square pressure wave theory and system identification | Tsung, T.T.; Chang, H.; Chen, L.C.; Wu, J.L.; Han, L.L.; LIANG-CHIA CHEN | Measurement Science and Technology | |||
172 | 2003 | Process Analysis and Characterization of ASNSS using Automatic On-line Measurement | Liang-Chia Chen; Tsing-Tshih Tsung; Ho Chang; Jen-Yan Sun; LIANG-CHIA CHEN | International periodical Key Engineering Materials | |||
173 | 2003 | Development of pressure control technique of an arc-submerged nanoparticle synthesis system (ASNSS) for copper nanoparticle fabrication | Tsung, T.-T.; Chang, H.; Chen, L.-C.; Han, L.-L.; Lo, C.-H.; Liu, M.-K.; LIANG-CHIA CHEN | Materials Transactions | |||
174 | 2003 | An Innovative Three-dimensional Profilometer for Surface Profile Measurement Using Digital Fringe Projection and Phase Shifting | Liang-Chia Chen; Shien-Han Tsai; Kuang-Chao Fan; LIANG-CHIA CHEN | International periodical Key Engineering Materials | |||
175 | 2003 | Innovative 3-D Dental Measurement for Tooth Model Restoration | Liang-Chia Chen; Zhiqin Xu; LIANG-CHIA CHEN | International periodical Key Engineering Materials | |||
176 | 2000 | Reverse engineering in the design of turbine blades - a case study in applying the MAMDP | Chen, L.-C.; Lin, G.C.I.; LIANG-CHIA CHEN | Robotics and Computer-Integrated Manufacturing | |||
177 | 1997 | Reverse engineering physical models employing a sensor integration between 3D stereo detection and contact digitisation | Chen, L.-C.; Lin, G.C.I.; LIANG-CHIA CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
178 | 1997 | An integrated reverse engineering approach to reconstructing free-form surfaces | Chen, L.-C.; Lin, G.C.I.; LIANG-CHIA CHEN | Computer Integrated Manufacturing Systems | |||
179 | 1997 | A Vision-Aided Reverse Engineering Approach to Reconstructing Free-Form Surfaces | Chen, L.-C.; Lin, G.C.I.; LIANG-CHIA CHEN | Robotics and Computer-Integrated Manufacturing | |||
180 | 1991 | 電腦輔助加工中自動量測與誤差補償系統之研製 | 范光照; 陳亮嘉 | 中國機械工程學會第八屆學術研討會論文集 |