第 1 到 51 筆結果,共 51 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2023 | A generative model for path synthesis of four-bar linkages via uniform sampling dataset | Yu, Sheng Chia; Chang, Yuan; JYH-JONE LEE | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | 1 | 1 | |
2 | 2022 | Motion modeling of cable-driven continuum robots using vector form intrinsic finite element method | Wang M.-L; Kuo I.-H; JYH-JONE LEE | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A | 1 | 1 | |
3 | 2021 | Development of an adaptive explicit algorithm for static simulation using the vector form intrinsic finite element method | Wang M.-L; Chuang C.-C; Lee J.-J.; JYH-JONE LEE | Journal of Mechanics | |||
4 | 2021 | Robot grasping in dense clutter via view-based experience transfer | Wang J.-W; Li C.-L; Chen J.-L; Lee J.-J.; JYH-JONE LEE | International Journal of Intelligent Robotics and Applications | |||
5 | 2020 | Kinematic error analysis of the rotor vector gear reducer with machining tolerances | Wu, K.-Y.; Shih, Y.-P.; Lee, J.-J.; JYH-JONE LEE | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 9 | ||
6 | 2016 | Design Optimization of a Compliant Revolute Joint | Wu J.-M.; Shih P.-J.; Lee J.-J. | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 0 | ||
7 | 2015 | On the kinematics of a new parallel mechanism with Schoenflies motion | Lee, P.-C.; Lee, J.-J.; JYH-JONE LEE | Robotica | |||
8 | 2014 | Design of a two-stage cycloidal gear reducer with tooth modifications | Lin, W.-S.; Shih, Y.-P.; Lee, J.-J.; JYH-JONE LEE | Mechanism and Machine Theory | |||
9 | 2013 | Residual stress of curvature sapphire substrate with GaN film released by the application of trench structures | Liao, M.-H. ; Lee, J.-J.; Chen, C.-H.; Kao, S.-C.; Chen, K.-C.; JYH-JONE LEE | International Journal of Automation and Smart Technology | 0 | 0 | |
10 | 2012 | Optimization design of tendon-driven manipulators with high fault tolerance | Sheu, J.-B.; Lee, J.-J.; Sheu, Jinn-Biau; Lee, Jyh-Jone; JYH-JONE LEE | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
11 | 2012 | On the fail-safe design of tendon-driven manipulators with redundant tendons | Sheu, J.-B.; Liu, T.; Lee, J.-J.; Sheu, Jinn-Biau; Liu, Tyng; Lee, Jyh-Jone; JYH-JONE LEE ; TYNG LIU | Journal of Mechanical Science and Technology | |||
12 | 2012 | Singularity and workspace analysis of three isoconstrained parallel manipulators with schoenflies motion | Lee, P.-C.; Lee, J.-J.; JYH-JONE LEE | Frontiers of Mechanical Engineering | |||
13 | 2010 | In-plane crushing analysis of cellular materials using vector form intrinsic finite element | Wu, T.Y.; Tsai, W.C.; Lee, J.J.; JYH-JONE LEE | Computers, Materials and Continua | |||
14 | 2010 | Kinematic synthesis of tendon-driven robotic manipulators using singular value decomposition | Sheu, Jinn-Biau; JYH-JONE LEE ; Huang, Jyun-Jheng; Lee, Jyh-Jone | Robotica | 11 | 10 | |
15 | 2010 | In-plane Crushing Analysis of Cellular Materials Using Vector Form Intrinsic Finite Element | Wu, T.Y.; Tsai, W.C.; Lee, J.J.; WuTY ; TsaiWCLeeJJ | CMC-Computers, Materials & Continua | |||
16 | 2009 | Dynamic elastic–plastic and large deflection analyses of frame structures using motion analysis of structures,” Thin-Walled Structures | Wu, Tung-Yueh; Tsai, Wen-Chang; Lee, Jyh-Jone | Thin-Walled Structures | |||
17 | 2009 | Design of Geneva mechanisms with curved slots for non-undercutting manufacturing | Lee, Jyh-Jone ; Jan, Bin-Heng | Mechanism and Machine Theory | 18 | 16 | |
18 | 2009 | Dynamic elastic-plastic and large deflection analyses of frame structures using motion analysis of structures | Wu, T.-Y.; Tsai, W.-C.; Lee, J.-J.; JYH-JONE LEE | Thin-Walled Structures | |||
19 | 2009 | Dynamic elastic–plastic and large deflection analyses of frame structures using motion analysis of structures | Tung-YuehWu*; Wen-ChangTsai; Jyh-JoneLee | Thin-Walled Structures | |||
20 | 2008 | Motion analysis of structures (MAS) for flexible multibody systems: Planar motion of solids | Wu, T.-Y.; Lee, J.-J.; Ting, E.C.; Wu, Tung-Yueh; Lee, Jyh-Jone; Ting, Edward C.; JYH-JONE LEE | Multibody System Dynamics | |||
21 | 2008 | Kinematic synthesis of a four-link mechanism with rolling contacts for motion and function generation | JYH-JONE LEE ; Sheu, Jinn-Biau; Sheu, J.-B.; Hu, Sheng-Lun; Lee, Jyh-J.; Lee, Jyh-Jone ; Hu, S.-L. | Mathematical and Computer Modelling | 3 | 3 | |
22 | 2006 | On the design of the latch mechanism for wafer containers in a SMIF environment | Lee, J.-J.; Chen, D.-Z.; Pai, W.-M.; JYH-JONE LEE ; DAR-ZEN CHEN | Journal of Mechanical Science and Technology | 1 | 1 | |
23 | 2006 | On the design of the latch mechanism for wafer containers in a SMIF environment | J.J. Lee ; D.Z. Chen; W.M. Pai | Journal of Mechanical Science and Technology | |||
24 | 2005 | Path synthesis of a finger-type gripping mechanism | Lee, J.-J.; Tsai, Y.-W.; Lee, Jyh-Jone; Tsai, Yu-Wei; Lee, J.J.; Tsai, Y.W; JYH-JONE LEE | Mechanism and Machine Theory | |||
25 | 2005 | Kinematic and compliance analysis for tendon-driven robotic mechanisms with flexible tendons | JYH-JONE LEE | Mechanism and Machine Theory | 33 | 27 | |
26 | 2004 | Geometry Analysis and Optimal Design of Geneva Mechanisms with Curved Slots | Lee, J.J.; Huang, K.F.; LeeJJ | Journal of Mechanical Engineering Science | |||
27 | 2004 | Geometry analysis and optimal design of Geneva mechanisms with curved slots | Lee, J.-J.; Huang, K.-F.; JYH-JONE LEE | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | |||
28 | 2003 | Dynamic Analysis of Tendon-Driven Robotic Mechanisms | Lee, J.-J.; Lee, Y. H.; LeeJJ | Journal of Robotic Systems | |||
29 | 2003 | Kinematic Analysis of Mechanisms with Rolling Pairs using Matrix Transformation Method | Lee, J.-J.; Lin, C.C.; Chen, C.P.; LeeJJ | Journal of Chinese Institute of Engineers | |||
30 | 2003 | Force Transmissibility Performance of Parallel Manipulators | W.T. Chang; C.C. Lin; J.J. Lee | Journal of Robotic Systems | |||
31 | 2003 | Kinematic analysis of mechanisms with rolling pairs using matrix transformation method | JYH-JONE LEE | Journal of the Chinese Institute of Engineers, Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
32 | 2003 | Dynamic Analysis of Tendon-Driven Robotic Mechanisms | J.-J. Lee* ; Y. H. Lee | Journal of Robotic Systems | |||
33 | 2003 | A decomposition methodology for design of mechanisms from functional and structural perspectives | Pai, W.-M.; Chen, D.-Z.; Lee, J.-J.; Wu, T.-M.; JYH-JONE LEE | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
34 | 2003 | Force Transmissibility Performance of Parallel Manipulators | Chang, W.-T.; Lin, C.-C.; Lee, J.-J.; JYH-JONE LEE | Journal of Robotic Systems | |||
35 | 2003 | Modeling of the dynamics of tendon-driven robotic mechanisms with flexible tendons | Lee, Y.-H.; Lee, J.-J.; JYH-JONE LEE | Mechanism and Machine Theory | |||
36 | 2003 | Dynamic analysis of tendon driven robotic mechanisms | Lee, J.-J.; Lee, Y.-H.; JYH-JONE LEE | Journal of Robotic Systems | |||
37 | 2003 | On The Design of An Innovative Latch Mechanism in SMIFed Wafer Containers | Pai, Wei-Ming; Chen, Dar-Zen ; Lee, Jyh-Jone ; Ho, Chi-Cher | The Chinese Journal of Mechanics | 0 | ||
38 | 2003 | 人工輔助卸載台車技術分析 | 李岳樺; 李志中 ; 陳達仁 ; 吳宗明; 楊東芳 | 機械工業雜誌 | |||
39 | 2003 | Topological Synthesis of Non-Fractionated Differential Geared Mechanisms for Automotives | Chen, Dar-Zen ; Yao, Kang-Li; Lee, Jyh-Jone | Journal of Mechanical Science | 0 | 0 | |
40 | 2003 | A Decomposition Methodology for the Creation of Mechanisms According to Its Functional and Structural Characteristics | Pai, Wei-Ming; Chen, Dar-Zen ; Lee, Jyh-Jone ; Wu, Tzong-Ming | Journal of Chinese Institute of Engineers | |||
41 | 2002 | Improving Kinematic and Structural Performance of Geneva Mechanisms Using Optimal Control Method | Lee, J.-J.; Cho, C.-C.; LeeJJ | Journal of Mechanical Engineering Science | |||
42 | 2002 | Structural Synthesis of Multi-Fingered Hands | Lee, J.-J.; Tsai, L.-W.; LeeJJ | ASME Transactions | |||
43 | 2002 | Improving kinematic and structural performance of Geneva mechanisms using the optimal control method | Lee, J.-J.; Cho, C.-C.; JYH-JONE LEE | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | |||
44 | 2002 | Structural synthesis of multi-fingered hands | Lee, J.-J.; Tsai, L.-W.; JYH-JONE LEE | Journal of Mechanical Design | |||
45 | 2002 | 晶圓傳送盒閂鎖機構之美國專利分析 | 陳達仁 ; 白維銘; 李志中 ; 吳宗明 | 機械工業雜誌 | |||
46 | 2001 | 轉換矩陣法用於具多Holonomic運動對機構之運動分析 | 陳鈞泊; 李志中 ; 林鎮洲 | The Chinese Journal of Mechanics | |||
47 | 1998 | SMIF內空氣流場之數值模擬 | 陳新全; 陳希立 ; 李志中 | 機械工業雜誌 | |||
48 | 1998 | Topological synthesis and geometry analysis for hand-object mechanisms | Lee, Jyh-Jone; JYH-JONE LEE | Journal of the Chinese Society of Mechanical Engineers, Series C | |||
49 | 1993 | Torque resolver design for tendon-driven manipulators | Lee, Jyh-Jone; Tsai, Lung-Wen; JYH-JONE LEE | Journal of Mechanical Design | |||
50 | 1991 | Structural synthesis of tendon-driven manipulators having a pseudotriangular structure matrix | Lee, Jyh-Jone; Tsai, Lung-Wen; JYH-JONE LEE | International Journal of Robotics Research | |||
51 | 1989 | Kinematic analysis of tendon-driven robotic mechanisms using graph theory | Tsai, L.-W.; Lee, J.-J.; JYH-JONE LEE | Journal of Mechanical Design |