第 1 到 98 筆結果,共 98 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2021 | A study on corrosion behavior of micro-arc oxidation coatings doped with 2-aminobenzimidazole loaded halloysite nanotubes on AZ31 magnesium alloys | Wu W.X; Wang W.P; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
2 | 2016 | Modifications in structure and properties of p-type nickel oxide films after argon ion beam bombardment | Chen S.C.; Kuo T.Y.; Wen C.K.; Wang C.H.; Hsu S.W.; Lin H.C.; HSIN-CHIH LIN | Science of Advanced Materials | |||
3 | 2015 | Investigation of defects in ultra-thin Al 2 O 3 films deposited on pure copper by the atomic layer deposition technique | Chang M.L.; Wang L.C.; Lin H.C. ; Chen M.J. ; Lin K.M. | Applied Surface Science | 22 | 21 | |
4 | 2015 | Microalloying effect of Si on mechanical properties of Ti based bulk metallic glass | Tsai P.H.; Hsu K.T.; Ke J.H.; Lin H.C.; Jang J.S.C.; Huang J.C.; HSIN-CHIH LIN | Materials Technology | |||
5 | 2015 | Low-temperature toughness of direct quenched offshore steel | Cheng T.C.; Yu C.; Yang T.C.; Huang C.Y.; Lin H.C.; HSIN-CHIH LIN ; REN-KAE SHIUE | Materials Research Innovations | 0 | 0 | |
6 | 2014 | The effect of dispersion status with functionalized graphenes for electric double-layer capacitors | Chen Y.-R.; Chiu K.-F.; Lin H.C.; Hsieh C.-Y.; Tsai C.B.; Chu B.T.T.; HSIN-CHIH LIN | Materials Science and Engineering B: Solid-State Materials for Advanced Technology | |||
7 | 2014 | Electrical and optical properties of p-type conductive NiO-Pt thin films | Chen S.C.; Kuo T.Y.; Lin H.C.; Hsu S.W.; Lin Y.C.; HSIN-CHIH LIN | International Journal of Nanotechnology | |||
8 | 2014 | Effects of cold-spray coatings on the corrosion properties of AZ80 magnesium alloy | Lee Y.J.; Wu S.C.; Chen J.H.; Yeh M.T.; Lin K.M.; Lin H.C.; HSIN-CHIH LIN | Key Engineering Materials | |||
9 | 2014 | Fatigue properties improvement of high-strength aluminum alloy by using a ZrCu-based metallic glass thin film coating | Tsai P.H.; Li J.B.; Chang Y.Z.; Lin H.C.; Jang J.S.C.; Chu J.P.; Lee J.W.; Liaw P.K.; HSIN-CHIH LIN | Thin Solid Films | |||
10 | 2014 | Graphene/activated carbon supercapacitors with sulfonated-polyetheretherketone as solid-state electrolyte and multifunctional binder | Chen Y.-R.; Chiu K.-F.; Lin H.C.; Chen C.-L.; Hsieh C.Y.; Tsai C.B.; Chu B.T.T.; HSIN-CHIH LIN | Solid State Sciences | |||
11 | 2014 | Designing a toxic-element-free Ti-based amorphous alloy with remarkable supercooled liquid region for biomedical application | Lin H.C.; Tsai P.H.; Ke J.H.; Li J.B.; Jang J.S.C.; Huang C.H.; Haung J.C.; HSIN-CHIH LIN | Intermetallics | |||
12 | 2013 | High rate performance of LiMn2O4 cathodes for lithium ion batteries synthesized by low temperature oxygen plasma assisted sol-gel process | Chen C.-L.; Chiu K.-F.; Chen Y.-R.; Chen C.C.; Lin H.C.; HSIN-CHIH LIN | Thin Solid Films | 16 | 15 | |
13 | 2013 | Effect of indium content on optical and electrical properties of in-doped ZnO films by RF co-sputtering | Chen S.C.; Kuo T.Y.; Peng W.C.; Ou S.L.; Lin H.C.; HSIN-CHIH LIN | Nanoscience and Nanotechnology Letters | |||
14 | 2013 | Zr-based metallic glass thin film coating for fatigue-properties improvement of 7075-T6 aluminum alloy | Chang Y.Z.; Tsai P.H.; Li J.B.; Lin H.C.; Jang J.S.C.; Li C.; Chen G.J.; Chen Y.C.; Chu J.P.; Liaw P.K.; HSIN-CHIH LIN | Thin Solid Films | |||
15 | 2013 | Novel open-cell bulk metallic glass foams with promising characteristics | Li J.B.; Lin H.C.; Jang J.S.C.; Kuo C.N.; Huang J.C.; HSIN-CHIH LIN | Materials Letters | |||
16 | 2013 | Thin catalyst layer deposited on proton-exchange membrane by self-breathing method | Chen Y.-R.; Chiu K.-F.; Chen C.-L.; Lin H.C.; Chang W.Y.; Tsai C.B.; Ho W.H.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
17 | 2013 | Effects of pre-sputtered Al interlayer on the atomic layer deposition of Al 2 O 3 films on Mg-10Li-0.5Zn alloy | Wang P.C.; Cheng T.C.; Lin H.C.; Chen M.J. ; HSIN-CHIH LIN ; Yeh M.T. | Applied Surface Science | 20 | 17 | |
18 | 2011 | Effects of T5 treatment on the microstructure and mechanical properties of Mg-8Al-2Li alloy | Wang P.C.; Lin H.C.; Lin K.M.; Lin M.C.; Yeh M.T.; HSIN-CHIH LIN | Materials Transactions | 4 | 4 | |
19 | 2011 | Combinational effects of oxygen plasma irradiation and annealing on Li Mn2 O4 thin film cathodes | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; Yang C.-R.; HSIN-CHIH LIN ; Lin, Hsin Chih | Journal of the Electrochemical Society | 3 | 3 | |
20 | 2009 | Effects of thermo-mechanical treatment on a Fe-13Mn-5Si-12Cr-5Ni shape memory alloy | Wu W.J.; Lin H.C.; Lin K.N.; Wu S.K.; Lin K.M.; HSIN-CHIH LIN | International Conference on Martensitic Transformations, ICOMAT-08 | |||
21 | 2009 | The machining characteristics and shape recovery ability of Ti-Ni-X (X=Zr, Cr) ternary shape memory alloys using the wire electro-discharge machining | Hsieh S.F.; Chen S.L.; Lin H.C.; Lin M.H.; Chiou S.Y.; HSIN-CHIH LIN | International Journal of Machine Tools and Manufacture | |||
22 | 2009 | A study of aging treatment on the Mg-10Li-0.5Zn alloy | Wang P.C.; Lin H.C.; Lin K.M.; Yeh M.T.; Lin C.Y.; HSIN-CHIH LIN | Materials Transactions | |||
23 | 2009 | Modification of low temperature deposited LiMn2O4 thin film cathodes by oxygen plasma irradiation | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; HSIN-CHIH LIN | Thin Solid Films | |||
24 | 2008 | The corrosion behaviors of heat-treated SAE 8620 steels | Hong S.; Lin H.C.; Lee Y.; Lian T.S.; Tseng L.Y.; Lin K.M.; HSIN-CHIH LIN | Materials Science Forum | |||
25 | 2008 | Effects of 2 mass % Li addition on the AZ80 Mg alloy | Wang P.C.; Lin C.C.; Huang T.Y.; Lin H.C.; Lee Y.H.; Yeh M.T.; Wang J.Y.; HSIN-CHIH LIN | Materials Transactions | |||
26 | 2008 | The precipitation hardening of LZ101 magnesium-lithium alloy | Wang P.C.; Lin H.C.; Lin K.M.; Yeh M.T.; HSIN-CHIH LIN | 17th IFHTSE Congress | |||
27 | 2008 | Electrochemical performances of Cu nanodots modified amorphous Si thin films for lithium-ion batteries | Chiu K.-F.; Lin K.M.; Lin H.C.; Hsu C.H.; Chen C.C.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
28 | 2008 | Effects of thermo-mechanical treatment on a Fe-30Mn-6Si shape memory alloy | Yang C.H.; Lin H.C.; Lin K.M.; Tsai H.K.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
29 | 2008 | Gas barrier properties of titanium oxynitride films deposited on polyethylene terephthalate substrates by reactive magnetron sputtering | Lin M.-C.; Chang L.-S.; Lin H.C.; HSIN-CHIH LIN | Applied Surface Science | |||
30 | 2008 | Effects of nitrogen partial pressure on titanium oxynitride films deposited by reactive RF magnetron sputtering onto PET substrates | Lin M.C.; Chang L.-S.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
31 | 2008 | Effects of carbon content and thermo-mechanical treatment on Fe 59Mn30Si6Cr5Cx (X = 0.015-0.1 mass%) shape memory alloys | Yang C.H.; Lin H.C.; Lin K.M.; Ho W.H.; HSIN-CHIH LIN | Materials Transactions | |||
32 | 2008 | The crystal structure and mechanical property of AZ80-2%Li Mg alloy | Wang P.C.; Lin C.C.; Huang T.Y.; Lin H.C.; Yeh M.T.; Lin K.M.; HSIN-CHIH LIN | Advanced Materials Research | |||
33 | 2008 | Electrical discharge machining of a NiAlFe ternary shape memory alloy | Chen S.L.; Hsieh S.F.; Lin H.C.; Lin M.H.; Huang J.S.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
34 | 2008 | Effects of slight Re addition on a Fe-25Mn-6Si-5Cr shape memory alloy | Wang T.P.; Lin K.M.; Lin H.C.; Wu W.J.; HSIN-CHIH LIN | Journal of Computational and Theoretical Nanoscience | 1 | 1 | |
35 | 2007 | Improved electrochemical performances of oxygen plasma treated LiMn 2O4 thin films | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; Yang C.-R.; HSIN-CHIH LIN | Physica Scripta T | 14 | 13 | |
36 | 2007 | The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders | Lin C.K.; Wang C.K.; Lee P.Y.; Lin H.C.; Lin K.M.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
37 | 2007 | Structural evolution and electrochemical performance of sputter-deposited Cu6 Sn5 thin-film anodes | Chiu K.-F.; Lin K.M.; Lin H.C.; Chen W.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
38 | 2007 | Effects of heat treatment and composition modification on SAE 8620 steels | Hong S.; Lin H.C.; Yang C.H.; Tseng L.Y.; Lin K.M.; HSIN-CHIH LIN | Materials Science Forum | |||
39 | 2007 | Cyclic hydrogen absorption-desorption characteristics of TiCrV and Ti0.8 Cr1.2 V alloys | Lin H.C.; Lin K.M.; Wu K.C.; Hsiung H.H.; Tsai H.K.; HSIN-CHIH LIN | International Journal of Hydrogen Energy | |||
40 | 2007 | Electrical discharge machining of TiNiCr and TiNiZr ternary shape memory alloys | Chen S.L.; Hsieh S.F.; Lin H.C.; Lin M.H.; Huang J.S.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
41 | 2007 | Characteristics of activation and anti-poisoning in an LmNi4.8 Al0.2 hydrogen storage alloy | Lin H.C.; Lin K.M.; Sung C.W.; Wu K.C.; HSIN-CHIH LIN | International Journal of Hydrogen Energy | |||
42 | 2006 | A study of high-speed slurry erosion of NiCrBSi thermal-sprayed coating | Lin M.C.; Chang L.S.; Lin H.C.; Yang C.H.; Lin K.M.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
43 | 2006 | Anode-shielded, sputter-deposited nanocrystalline Sn thin-film anodes for lithium-ion batteries | Chiu K.-F.; Lin H.C.; Lin K.M.; Lin T.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
44 | 2006 | The significant role of solid oxide interphase in enhancement of cycling performance of sn thin-film anodes | Chiu K.-F.; Lin H.C.; Lin K.M.; Lin T.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
45 | 2006 | Stability improvement of LiMn 2O 4 thin-film cathodes under high rate and over-discharge cycling | Chiu K.-F.; Lin H.C.; Lin K.M.; Chen C.C.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
46 | 2006 | Electrical resistivity of Ti-Ni binary and Ti-Ni-X (X = Fe, Cu) ternary shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Science and Engineering A | 27 | 24 | |
47 | 2006 | Effects of thermo-mechanical training on a Fe59Mn30Si6Cr5 shape memory alloy | Lin H.C.; Lin K.M.; Wu S.K.; Wang T.P.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Science and Engineering A | 27 | 23 | |
48 | 2005 | Structure and hydrogen absorption property of Mg2Ni-Ti alloy powders prepared by mechanical alloying | Lin C.K.; Wang C.K.; Lin H.C.; Lee P.Y.; HSIN-CHIH LIN | Journal of Metastable and Nanocrystalline Materials | |||
49 | 2005 | The wire electro-discharge machining characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.S.; Chu C.L.; HSIN-CHIH LIN | Journal of Materials Processing Technology | |||
50 | 2005 | Effects of Aluminum addition on magnesium-lithium-zinc alloy | Lin H.C.; Lin K.M.; Lin H.M.; Yang C.H.; Yeh M.T.; HSIN-CHIH LIN | Magnesium Technology | |||
51 | 2005 | Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloy I. Nitriding parameters and microstructure characterization | Lin H.C.; Lin K.M.; Chen Y.S.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
52 | 2005 | A study of Ti50-x/2Ni40-x/2Cu10Cr x (x = 0 ? 1 at.%) shape memory alloys | Lin H.C.; Yang C.H.; Lin K.M.; Hsu G.K.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
53 | 2005 | Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloyII. Erosion characteristics | Lin H.C.; Lin K.M.; Chen Y.S.; Yang C.H.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
54 | 2005 | Modification of sputter-deposited nanocrystalline Li xMn 2-yO 4 thin-film cathodes by in situ substrate bias and postanneal | Chiu K.-F.; Lin H.C.; Lin K.M.; Tsai C.H.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
55 | 2005 | Transformation sequence and second phases in ternary Ti-Ni-W shape memory alloys with less than 2 at.% W | Hsieh S.F.; Wu S.K. ; Lin H.C. ; C.H. Yang | Journal of Alloys and Compounds | |||
56 | 2004 | Structural Evolution and Stability of RF Sputter Deposited Li xMn2-yO4 Thin Film Cathodes | Chiu K.-F.; Hsiao H.H.; Chen G.S.; Liu H.L.; Her J.L.; Lin H.C.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
57 | 2003 | Effects of annealing and NaOH pretreatment on an LmNi3.65Al 0.34Mn0.27Co0.74 hydrogen storage alloy | Lin H.C.; Lin K.M.; Chou H.T.; Yeh M.T.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
58 | 2002 | The slurry erosion characteristics of precipitation-hardened Ti49Ni51 shape-memory alloy | Wu S.K.; Lin H.C.; Yang C.H.; HSIN-CHIH LIN | Materials Science Forum | |||
59 | 2002 | Corrosion behaviors of Fe-based shape-memory alloys | Lin H.C.; Lin K.M.; Lin C.S.; Chen F.H.; HSIN-CHIH LIN | Materials Science Forum | |||
60 | 2002 | The corrosion behavior of Fe-based shape memory alloys | Lin H.C.; Lin K.M.; Lin C.S.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Corrosion Science | 56 | 50 | |
61 | 2001 | An investigation of grain-boundary phase in Fe-30Mn-6Si-5Cr shape memory alloy | Lin H.C.; Lin C.S.; Lin K.M.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Journal of Alloys and Compounds | 14 | 14 | |
62 | 2001 | Electro-discharge machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Cheng I.S.; HSIN-CHIH LIN | Journal of Materials Science | |||
63 | 2001 | A comparison of slurry erosion characteristics of TiNi shape memory alloys and SUS304 stainless steel | Lin H.C.; Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Wear | 54 | 51 | |
64 | 2001 | Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Chemistry and Physics | 9 | 9 | |
65 | 2000 | Wire drawing conducted in the R-phase of TiNi shape memory alloys | Wu S.K.; Lin H.C.; Yen Y.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Letters | 21 | 20 | |
66 | 2000 | Welding characteristics of Fe-based shape memory alloys | Lin H.C.; Lin K.M.; Chuang Y.C.; Chou T.S.; Chen F.H.; HSIN-CHIH LIN | Materials Science Forum | |||
67 | 2000 | Study on the machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.C.; HSIN-CHIH LIN | Journal of Materials Processing Technology | |||
68 | 2000 | Welding characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr shape memory alloys | Lin H.C.; Lin K.M.; Chuang Y.C.; Chou T.S.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
69 | 2000 | The wire electro-discharge machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Cheng I.S.; HSIN-CHIH LIN | High Temperature Material Processes | |||
70 | 2000 | Interface of sputter-deposited TiNi thin film on (100) Si wafer | Wu S.K.; Wang J.Y.; Wu I.J.; Lin H.C.; HSIN-CHIH LIN | Materials Science Forum | |||
71 | 2000 | A comparison of the cavitation erosion resistance of TiNi alloys, SUS304 stainless steel and Ni-based self-fluxing alloy | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Wear | 99 | 83 | |
72 | 2000 | An investigation of unbalanced-magnetron sputtered TiAlN films on SKH51 high-speed steel | Wu S.K.; Lin H.C.; HSIN-CHIH LIN ; PEI-LING LIU | Surface and Coatings Technology | 56 | 52 | |
73 | 2000 | Characterization of internal friction of Fe-30Mn-6Si-5Cr | Chou T.S.; Lin H.C.; Lin K.M.; SHYI-KAAN WU ; HSIN-CHIH LIN | Scripta Materialia | 9 | 7 | |
74 | 1999 | A study of TiNiV ternary shape memory alloys | Lin H.C.; Lin K.M.; Chang S.K.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Journal of Alloys and Compounds | 35 | 31 | |
75 | 1999 | The laser machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.C.; HSIN-CHIH LIN | High Temperature Material Processes | |||
76 | 1999 | Gas nitriding of an equiatomic TiNi shape-memory alloy: Part I: Nitriding parameters and microstructure characterization | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
77 | 1999 | Cavitation-resistant TiNi films deposited by using cathodic arc plasma ion plating | He J.L.; Won K.W.; Chang C.T.; Chen K.C.; Lin H.C.; HSIN-CHIH LIN | Wear | |||
78 | 1999 | Gas nitriding of an equiatomic TiNi shape memory alloy: II. Hardness, wear and shape memory ability | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
79 | 1999 | Multi-strengthening effects on the martensitic transformation temperatures of TiNi shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Materials Science | 10 | 11 | |
80 | 1999 | Study on the machinability of a Ti49.6Ni50.4 shape memory alloy | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Letters | 94 | 87 | |
81 | 1998 | Dry sliding wear of TiNi shape memory alloys | Liao H.M.; Lin H.C.; He J.L.; Chen K.C.; Lin K.M.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
82 | 1998 | TiNi-based high temperature shape memory alloys | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
83 | 1997 | Ion nitriding of equiatomic TiNi shape memory alloys II. Corrosion properties and wear characteristics | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
84 | 1997 | Ion nitriding of TiNi shape memory alloys I. Nitriding parameters and microstructure characterization | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
85 | 1997 | A study of vacuum carburization of an equiatomic TiNi shape memory alloy | Wu S.K.; Lee C.Y.; Lin H.C.; HSIN-CHIH LIN | Scripta Materialia | |||
86 | 1997 | Wear-resistance of TiNi intermetallics with TiN coating | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | TMS Annual Meeting | |||
87 | 1997 | Wear characteristics of ion-nitrided Ti50Ni50 shape memory alloys | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
88 | 1997 | Elastic interaction between screw dislocations and a circular surface crack | Lin K.M.; Lin H.C.; Chen K.C.; Chang H.L.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
89 | 1996 | Elastic interaction between a coherent interface and a finite crack | Lin K.M.; Lin H.C.; Wang S.D.; HSIN-CHIH LIN | Physica Status Solidi (A) Applied Research | |||
90 | 1996 | A study of Fe-30Mn-6Si shape memory alloys prepared from different melting techniques | Lin H.C.; Lin K.M.; Chou T.S.; HSIN-CHIH LIN | Scripta Materialia | |||
91 | 1996 | An investigation of martensitic transformation in an Fe-30Mn-6Si shape memory alloy | Lin H.C.; Lin K.M.; HSIN-CHIH LIN | Scripta Materialia | |||
92 | 1996 | Extended dislocations around a semi-infinite crack | Lin K.M.; Lin H.C.; Chen K.C.; HSIN-CHIH LIN | Engineering Fracture Mechanics | |||
93 | 1996 | A study on the wire drawing of TiNi shape memory alloys | Wu S.K. ; Lin H.C. ; Y.C. Yen | Materials Science and Engineering A | 48 | 47 | |
94 | 1995 | Shape-memory intermetallics development in Taiwan | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | Acta Metallurgica Sinica Series A, Physical Metallurgy & Materials Science | |||
95 | 1994 | The tensile behavior of a cold-rolled and reverse-transformed equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Acta Metallurgica Et Materialia | 110 | 106 | |
96 | 1994 | The martensitic transformation in Ti-rich TiNi shape memory alloys | Lin H.C. ; SHYI-KAAN WU ; Lin J.C. | Materials Chemistry and Physics | 69 | 62 | |
97 | 1992 | Effects of hot rolling on the martensitic transformation of an equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Materials Science and Engineering A | 26 | 25 | |
98 | 1992 | Strengthening effect on shape recovery characteristic of the equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Scripta Metallurgica et Materiala | 75 | 74 |