第 1 到 71 筆結果,共 71 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2019 | LTD PKG. (Liquid Thermal Dissipation Package) Technology | Huang, Y.L.; Chung, C.K.; Lin, C.F.; Xu, B.; Liao, Y.S.; YUNN-SHIUAN LIAO | Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT | |||
2 | 2018 | A Study of the Debris Exclusion for Various Cross-section Electrodes in Linear Motor Equipped Deep Cavity EDM Process | Liao, Y.S.; Liang, F.Y.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO | Procedia CIRP | 2 | 0 | |
3 | 2018 | Study of the EDM performance to produce a stable process and surface modification | Liang, J.F.; Liao, Y.S.; Kao, J.Y.; Huang, C.H.; Hsu, C.Y.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
4 | 2016 | Study of Vibration Assisted Inclined feed Micro-EDM Drilling | Liao, Y.S.; Liang, H.W.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
5 | 2014 | Methods to measure wire deflection in wire EDM machining | Liang, J.-F.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Automation Technology | |||
6 | 2013 | Study of debris exclusion effect in linear motor equipped die-sinking EDM process | Liao, Y.S.; Wu, P.S.; Liang, F.Y.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
7 | 2013 | An approach to improve machined surface finish in micro milling | Liao, Y.S.; Huang, C.L.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
8 | 2013 | An improved CVDD bur used in ultrasonic dental system for enamel removal | Liao, Y.S.; Lee, C.L.; Liao, K.T.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
9 | 2012 | Ultrasonic vibration assisted mechanical chemical polishing (MCP) of silicon carbide | Liao, Y.S.; Yu, Y.P.; Huang, C.W.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
10 | 2010 | Vibration assisted scribing process on LCD glass substrate | Liao, Y.S.; Yang, G.M.; Hsu, Y.S.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
11 | 2010 | CIMDW - A new technique of corona ignited micro-discharge in microwelding | Liao, Y.S.; Lin, J.Y.; Chung, Y.C.; Yang, T.Y.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
12 | 2010 | Effects of cutting fluid with nano particles on the grinding of titanium alloys | Liao, Y.S.; Yu, Y.P.; Chang, C.H.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
13 | 2009 | A method of etching and powder blasting for microholes on brittle materials | Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 8 | 8 | |
14 | 2009 | An on-line pulse trains analysis system of the wire-EDM process | Liao, Y.S.; Cheng, M.P.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 13 | 9 | |
15 | 2009 | Effect of geometrical characteristics of a scribing wheel on the bending strength of LCD glass substrates | Liao, Y.S.; Yang, G.M.; YUNN-SHIUAN LIAO | Journal of the Society for Information Display | 6 | 4 | |
16 | 2009 | Investigation of the wear of the pad conditioner in chemical mechanical polishing process | Liao, Y.S.; Yang, C.T.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
17 | 2008 | Wear behavior in turning high hardness alloy steel by CBN tool | Lin, H.M.; Liao, Y.S.; YUNN-SHIUAN LIAO | Wear | 94 | 62 | |
18 | 2008 | Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool | Liao, Y.S.; Wei, C.C.; LiaoYS | Wear | |||
19 | 2008 | Behaviors of end milling Inconel 718 superalloy by cemented carbide tools | Liao, Y.S.; Lin, H.M.; Wang, J.H.; LiaoYS | Journal of Materials Processing Technology | 143 | ||
20 | 2008 | An on-line monitoring system for a micro electrical discharge machining (micro-EDM) process | Liao, Y.S.; Chang, T.Y.; Chuang, T.J.; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | |||
21 | 2007 | Mechanism of minimum quantity lubrication in high-speed milling of hardened steel | Liao, Y.S.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 139 | ||
22 | 2007 | The study of rapid prototyping process with embedded functional inserts | Liao, Y.S.; Li, H.C.; Chen, M.T.; LiaoYS | Journal of Materials | 9 | ||
23 | 2007 | Single diamond dressing characteristics of CMP polyurethane pad | Liao, Y.S.; Tsai, M.Y.; Sung, J.C.; Pai, Y.L.; YUNN-SHIUAN LIAO | Key Engineering Materials | |||
24 | 2007 | Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy | Liao, Y.S.; Chen, Y.C.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 119 | ||
25 | 2007 | Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool | Liao, Y.S.; Lin, H.M.; Chen, Y.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 111 | ||
26 | 2007 | Adaptive control of the WEDM process using a self-tuning fuzzy logic algorithm with grey prediction | Liao, Y.S.; Chen, Y.M.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
27 | 2006 | Determination of mask opening size in creating a fluid hole on brittle material by double-side sand blasting | Liao, Y.S.; YUNN-SHIUAN LIAO ; Chen, L.C. | International Journal of Advanced Manufacturing Technology | 2 | 4 | |
28 | 2006 | Study of laminated object manufacturing with separately applied heating and pressing | Liao, Y.S.; Li, H.C.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
29 | 2006 | Determination of Mask Opening Size in Creating Fluid Hole on Brittle Material by Double-Side Sand Blasting | Liao, Y.S.; Chen, L.C.; LiaoYS ; ChenLC | The International Journal of Advanced Manufacturing Technology | |||
30 | 2006 | Fabrication of diffractive optical lens for beam splitting using LIGA process | Yang, J.J.; Liao, Y.S.; Chen, C.F.; YUNN-SHIUAN LIAO | 2006 IEEE International Conference on Mechatronics and Automation | |||
31 | 2005 | Computational Study of the Effect of Finger Width and Aspect Ratios for the Electrostatic Levitating Force of MEMS Combdrive | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Journal of Microelectromechanical Systems | |||
32 | 2005 | Development of a High Precision Tabletop Versatile CNC Wire-EDM for Making Intricate Micro Parts | Liao, Y.S.; Chen, S.T.; Lin, C.S.; LiaoYS | Journal of Micromechanics and Microengineering | |||
33 | 2004 | The Energy Aspect of Material Property in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | Journal of Material Processing Technology | |||
34 | 2004 | An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive | Liao, Y.S.; Chyuan, S.W.; Chen, J.T.; LiaoYS | Journal of Micromechanics and Microengineering | |||
35 | 2004 | A Study to Achieve a Fine Surface Finish in Wire-EDM | Liao, Y.S.; Huang, J.T.; Chen, Y.H.; LiaoYS | Journal of Material Processing Technology | |||
36 | 2004 | Study of Specific Discharge Energy in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | International Journal of Machine Tools and Manufacture | 76 | ||
37 | 2004 | Efficaciously Modeling Exterior Electrostatic Problems with Singularity for Electron Devices | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Circuits and Devices Magazine | |||
38 | 2004 | Numerical studies of variations in the gap and finger width ratio and travelled distance for the driving force of a radio-frequency microelectromechanical system device using the dual boundary element method | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Proceedings of the Institution of Mechanical Engineers | 1 | ||
39 | 2004 | A study to achieve a fine surface finish in Wire-EDM | Liao, Y.S.; Huang, J.T.; Chen, Y.H.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
40 | 2004 | The energy aspect of material property in WEDM and its application | Liao, Y.S.; Yu, Y.P.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
41 | 2004 | Study of electrochemical discharge machining technology for slicing non-conductive brittle materials | Peng, W.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
42 | 2004 | Slicing strategies to obtain accuracy of feature relation in rapidly prototyped parts | Chiu, Y.Y.; Liao, Y.S.; Lee, S.C.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
43 | 2003 | A New Approach of Online Waste Removal Process for Laminated Object Manufacturing (LOM) | Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.; LiaoYS | Journal of Materials Processing Technology | |||
44 | 2003 | Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses | Huang, J.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Production Research | |||
45 | 2003 | Study on wear mechanisms in drilling of Inconel 718 superalloy | Liao, Y.S.; Chen, Y.C.; LiaoYS | Journal of Materials Processing Technology | |||
46 | 2003 | Automatic fabrication for bridged laminated object manufacturing (LOM) process | Chiu, Y.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 18 | 15 | |
47 | 2003 | Self-tuning fuzzy control with a grey prediction for wire rupture prevention in WEDM | Lee, W.M.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
48 | 2003 | A new approach of online waste removal process for laminated object manufacturing (LOM) | Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
49 | 2003 | Study on wear mechanisms in drilling of Inconel 718 superalloy | Chen, Y.C.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
50 | 2003 | Laser path planning of burn-out rule for LOM process | Chiu, Y.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Rapid Prototyping Journal | |||
51 | 2002 | A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM | Liao, Y.S.; Yan, M.T.; Chang, C.C.; LiaoYS | Journal of Materials Processing Technology | 33 | ||
52 | 2001 | Adaptive crosshatch approach for the laminated object manufacturing (LOM) process | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | International Journal of Production Research | 9 | ||
53 | 2001 | A New Slicing Procedure for Rapid Prototyping Systems | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
54 | 2001 | On-line estimation of workpiece height by using neural networks and hierarchical adaptive control of WEDM | Yan, M.T.; Liao, Y.S.; Chang, C.C.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
55 | 2000 | Design of a Fuzzy Controller for the Adaptive control of WEDM Process | Liao, Y.S.; Woo, J.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 38 | ||
56 | 2000 | A thermal model of the wet grinding process | Liao, Y.S.; Luo, S.Y.; Yang, T.H.; LiaoYS | Journal of Materials Processing Technology | |||
57 | 2000 | Thermal model of the wet grinding process | Liao, Y.S.; Luo, S.Y.; Yang, T.H.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
58 | 2000 | A wire-EDM maintenance and fault-diagnosis expert system integrated with an artificial neural network | Huang, J.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Production Research | |||
59 | 1999 | Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools | Luo, S.Y.; Liao, Y.S.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 151 | 120 | |
60 | 1999 | Fundamental geometry analysis of wire electrical discharge machining in corner cutting | Hsue, W.J.; Liao, Y.S.; Lu, S.S.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
61 | 1999 | Determination of finish-cutting operation number and machining-parameters setting in wire electrical discharge machining | Huang, J.T.; Liao, Y.S.; Hsue, W.J.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
62 | 1998 | Adaptive Control of the WEDM Process Using the Fuzzy Control Strategy | Yan, M.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Manufacturing Systems | |||
63 | 1997 | Analysis of the wear of a resin-bonded diamond wheel in the grinding of tungsten carbide | Luo, S.Y.; Liao, Y.S.; Chou, C.C.; Chen, J.P.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
64 | 1996 | Monitoring and self-learning fuzzy control for wire rupture prevention in wire electrical discharge machining | Yan, M.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
65 | 1996 | A self-learning Fuzzy controller for wire rupture prevention in WEDM | Yan, M.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
66 | 1995 | Study of the behaviour of diamond saw-blades in stone processing | Luo, S.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
67 | 1993 | Effects of matrix characteristics on diamond composites | Liao, Y.S.; Luo, S.Y.; YUNN-SHIUAN LIAO | Journal of Materials Science | |||
68 | 1993 | Effects of diamond grain characteristics on sawblade wear | Luo, S.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
69 | 1992 | Wear characteristics of sintered diamond composite during circular sawing | Liao, Y.S.; Luo, S.Y.; YUNN-SHIUAN LIAO | Wear | |||
70 | 1991 | Vibrations of pretwisted spinning beams under axial compressive loads with elastic constraints | Chen, M.L.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Sound and Vibration | |||
71 | 1991 | Computer simulation of self- excited and forced vibrations in the external cylindrical plunge grinding process | Liao, Y.S.; Shiang, L.C.; YUNN-SHIUAN LIAO | Journal of Manufacturing Science and Engineering, Transactions of the ASME |