第 1 到 426 筆結果,共 426 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 1999 | Balancing liquid crystallinity with microphase separation in block copolymers | Ober, Christopher K.; CHI-YANG CHAO ; Li, Mingqi; Li, Xuefa | American Chemical Society, Polymer Preprints, Division of Polymer Chemistry | 0 | 0 | |
2 | 1999 | Hexamethyldisiloxane Film as the Bottom Antireflective Coating Layer for ArF Excimer Laser Lithography | HSUEN-LI CHEN ; LON A. WANG | Applied Optics | 13 | 12 | |
3 | 1999 | 合金相轉變研究用膨脹儀 | 楊哲人 ; 蔡明欽 | 科儀新知 | |||
4 | 1999 | 包銅鋁鋼時效析出之電子顯微鏡組織研究 | 蕭健男; 楊哲人 | 科儀新知 | |||
5 | 1999 | 微電子用鉍錫銲料與銅反應之研究 | 高振宏 | 工程科技通訊 | |||
6 | 1999 | 熱力學與相圖之關係 | 何政恩; 蕭本俐; 高振宏 | 化工 | |||
7 | 1999 | Semiconductor Lasers with Broadband Tunability | CHING-FUH LIN ; Lee, Bor Lin; MIIN-JANG CHEN | Optics InfoBase Conference Papers | 0 | ||
8 | 1999 | Mechanical Properties of Al2O3-NiAl Composites | Tuan, Wei-Hsing ; Pai, Yu-Pan | Journal of the American Ceramic Society | 24 | ||
9 | 1999 | 鋰電池正極材料-鋰錳氧化物之開發研究 | 段維新 | ||||
10 | 1999 | Effect of microstructure on the electrical properties of NiO-doped BaTiO<inf>3</inf> | Tzing, W.H.; Tuan, W.H.; Lin, H.L.; WEI-HSING TUAN | Ceramics International | |||
11 | 1999 | Debonding behavior between ?]-Si3N4 whiskers and oxynitride glasses with or without an epitaxial ?]-SiAlON interfacial layer | Sun E.Y.; Becher P.F.; Hsueh C.-H.; Painter G.S.; Waters S.B.; Hwang S.-L.; Hoffmann M.J.; CHUN-HWAY HSUEH | Acta Materialia | |||
12 | 1999 | Model experiment on a protrusion method for measurement of interface shear sliding stress in fiber-reinforced composite | Kagawa Y.; Hsueh C.-H.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
13 | 1999 | Effects of interface roughness on residual stresses in thermal barrier coatings | Hsueh, C.-H.; Haynes, J.A.; Lance, M.J.; Becher, P.F.; Ferber, M.K.; Fuller Jr.; E.R.; Langer, S.A.; Carter, W.C.; Cannon, W.R.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
14 | 1999 | Broadly tunable semiconductor lasers using asymmetric dual quantum wells | Lin, Ching-Fuh ; Lee, Bor-Lin; Chen, Miin-Jang | Optics Communications | 4 | 2 | |
15 | 1999 | Gas nitriding of an equiatomic TiNi shape memory alloy: II. Hardness, wear and shape memory ability | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
16 | 1999 | Interdependence between green compact property and powder agglomeration and their relation to the sintering behaviour of zirconia powder | Liu, D.-M.; Lin, J.-T.; Tuan, W.H.; WEI-HSING TUAN | Ceramics International | |||
17 | 1999 | Effect of NiO addition on the sintering and grain growth behaviour of BaTiO<inf>3</inf> | Tzing, W.H.; Tuan, W.H.; WEI-HSING TUAN | Ceramics International | |||
18 | 1999 | Phase relation in the titanium-rich region of the Ge-Si-Ti ternary system | Jain T.A.; Huang C.G.; Ho C.E.; C. ROBERT KAO | Materials Transactions | |||
19 | 1999 | Binary compounds in the Ge-Ti system | Jain T.A.; C. ROBERT KAO | Journal of Alloys and Compounds | |||
20 | 1999 | Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering | Ho C.E.; Chen Y.M.; C. ROBERT KAO | Journal of Electronic Materials | |||
21 | 1999 | Microcracking of flash coatings and its effect on the Zn-Ni coating adhesion of electrodeposited sheet steel | Lin, C.S.; Lee, H.B.; Hsieh, S.H.; CHAO-SUNG LIN | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | |||
22 | 1999 | Pressureless sintering of Al2O3/Ni nanocomposites | Chen, R. Z.; Tuan, W. H.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
23 | 1999 | 自發韌化莫來石之製備研究 | 段維新 | ||||
24 | 1999 | Schottky barrier heights of tantalum oxide, barium strontium titanate, lead titanate, and strontium bismuth tantalate | Robertson J.; Chen C.W.; CHUN-WEI CHEN | Applied Physics Letters | |||
25 | 1999 | Gas nitriding of an equiatomic TiNi shape-memory alloy: Part I: Nitriding parameters and microstructure characterization | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
26 | 1999 | Cavitation-resistant TiNi films deposited by using cathodic arc plasma ion plating | He J.L.; Won K.W.; Chang C.T.; Chen K.C.; Lin H.C.; HSIN-CHIH LIN | Wear | |||
27 | 1999 | Doping mechanism in tetrahedral amorphous carbon | Chen C.W.; Robertson J.; CHUN-WEI CHEN | Carbon | |||
28 | 1999 | AISI 410 麻田散鐵不銹鋼相變態研究 | 楊哲人 | ||||
29 | 1999 | Study on the machinability of a Ti49.6Ni50.4 shape memory alloy | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Letters | 94 | 87 | |
30 | 1999 | Formation of Si nanoclusters in amorphous silicon thin films by excimer laser annealing | Yeh, Jiun-Lin; Chen, Hsuen-Li ; Shih, An; Lee, Si-Chen | Electronics Letters | 1 | 1 | |
31 | 1999 | A study of TiNiV ternary shape memory alloys | Lin H.C.; Lin K.M.; Chang S.K.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Journal of Alloys and Compounds | 35 | 31 | |
32 | 1999 | 改良型2.25CR-1MO蒸氣管路合金鋼銲接模擬熱影響區歷經高溫長時間之相變態研究 | 楊哲人 | ||||
33 | 1999 | Interference Coatings Based on Synthesized Silicon Nitride | Lee, Cheng-Chung; Chen, Hsuen-Li ; Hsu, Jin-Cherng; Tien, Chuen-Lin | Applied Optics | |||
34 | 1999 | Exaggerated grain growth in Fe-doped Al<inf>2</inf>O<inf>3</inf> | Tzing, W.H.; Tuan, W.H.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
35 | 1999 | Microstructures of heat-affected zone in niobium containing steels | Yang, J.R.; Huang, C.Y.; Chiou, C.S.; JER-REN YANG | Materials Transactions, JIM | |||
36 | 1999 | The effect of compressive deformation of austenite on the Widmanstatten ferrite transformation in Fe-Mn-Si-C steel | Larn, R. H.; Yang, J. R.; JER-REN YANG | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 23 | ||
37 | 1999 | Microstructures and fatigue crack growth of EH36 TMCP steel weldments | Tsay, L.W.; Chern, T.S.; Gau, C.Y.; Yang, J.R.; JER-REN YANG | International Journal of Fatigue | |||
38 | 1999 | The laser machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.C.; HSIN-CHIH LIN | High Temperature Material Processes | |||
39 | 1999 | Quantum confinement effect in diamond nanocrystals studied by X-ray-absorption spectroscopy | Chang, Y. K.; Hsieh, H. H.; Pong, W. F.; Tsai, M. H.; Chien, F. Z.; Tseng, P. K.; Chen, L. C.; Wang, T. Y.; Chen, K. H.; Bhusari, D. M.; Yang, J. R.; SHIANG-TAI LIN ; JER-REN YANG ; LI-CHYONG CHEN | Physical Review Letters | 117 | 115 | |
40 | 1999 | Mechanical and dielectric properties of BaTiO<inf>3</inf>/Ag composites | Chen, C.Y.; Tuan, W.H.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
41 | 1999 | Schottky enhancement of contacts to n-GaAs via the exchange mechanism using NiAlxGa1-x as a metallization | Chen, C. P.; Lin, C. F.; Swenson, D.; Kao, C. R.; Jan, C. H.; Chang, Y. A.; C. ROBERT KAO | Journal of Vacuum Science & Technology B | 2 | ||
42 | 1999 | Formation and absence of intermetallic compounds during solid-state reactions in the Ni-Bi system | Lee S M.; Chen C.; C. ROBERT KAO | Chemistry of Materials | |||
43 | 1999 | Influence of residual stress on thermal expansion behavior | Wang X.-L.; Hoffmann C.M.; Hsueh C.H.; Sarma G.; Hubbard C.R.; Keiser J.R.; CHUN-HWAY HSUEH | Applied Physics Letters | |||
44 | 1999 | The microstructure-mechanical properties relationships of BaTiO<inf>3</inf> | Tuan, W.H.; Lin, S.K.; WEI-HSING TUAN | Ceramics International | |||
45 | 1999 | Surface characterisation of strontium-bismuth tantalate (SBT) thin films | Hartmann A.J.; Lamb R.N.; Scott J.F.; Johnston P.N.; El Bouanani M.; Chen C.W.; Robertson J.; CHUN-WEI CHEN | Integrated Ferroelectrics | |||
46 | 1999 | Analytical and numerical analyses for two-dimensional stress transfer | Hsueh C.H.; Fuller Jr. E.R.; Langer S.A.; Carter W.C.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
47 | 1999 | Interfacial reactions between ni substrate and the component bi in solders | Lee M.S.; Liu C.M.; C. ROBERT KAO | Journal of Electronic Materials | 28 | 29 | |
48 | 1999 | The microstructure–mechanical properties relationships of BaTiO3 | Tuan, W. H.; Lin, S. K.; TuanWH | Ceramics International | |||
49 | 1999 | Multi-strengthening effects on the martensitic transformation temperatures of TiNi shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Materials Science | 10 | 11 | |
50 | 1999 | Schottky barrier heights of tantalum oxide, barium strontium titanate, lead zirconate titanate and strontium bismuth tantalate | Robertson J.; Chen C.W.; CHUN-WEI CHEN | Materials Research Society Symposium | |||
51 | 1999 | Effect of surface grinding on the strength of NiAl and Al<inf>2</inf>O<inf>3</inf>/NiAl composites | Chang, S.T.; Tuan, W.H.; You, H.C.; Lin, I.C.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
52 | 1999 | Hexamethyldisiloxane Film as the Bottom Antireflective Coating Layer for ArF Excimer Laser Lithography | Chen, Hsuen-Li ; Wang, Lon A. | Applied Optics | 13 | 12 | |
53 | 1999 | Toughening Behavior in Ceramics and Cermets | Becher P.F.; Sun E.Y.; Hsueh C.H.; Plucknett K.P.; Kim H.D.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Key Engineering Materials | |||
54 | 1999 | Contribution of residual stress to the strength of abrasive ground alumina | Tuan, W. H.; Kuo, J. C.; TuanWH | Journal of the European Ceramic Society | 18 | ||
55 | 1999 | 第五屆國際材料會議後順道赴大陸參訪材料相關單位 | 段維新 | ||||
56 | 1999 | High purity nano-crystalline carbon nitride films prepared at ambient temperature by ion beam sputtering | Lu, T.R.; Kuo, C.T.; Yang, J.R.; Chen, L.C.; Chen, K.H.; JER-REN YANG ; LI-CHYONG CHEN | Surface and Coatings Technology | 20 | 18 | |
57 | 1999 | Surface-roughness induced residual stresses in thermal barrier coatings: computer simulations | Hsueh C.H.; Becher P.F.; Fuller Jr. E.R.; Langer S.A.; Carter W.C.; CHUN-HWAY HSUEH | Materials Science Forum | |||
58 | 1999 | Criteria for formation of interface dislocations in a finite thickness epilayer deposited on a substrate | Zhang T.-Y.; Lee S.; Guido L.J.; Hsueh C.-H.; CHUN-HWAY HSUEH | Journal of Applied Physics | |||
59 | 1998 | Characteristics of deuterium-loaded fiber bragg gratings | C. W. Hsu; HSUEN-LI CHEN ; LON A. WANG | Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers | 3 | 3 | |
60 | 1998 | 銲接在電子工業上的應用 | 陳琪; 高振宏 | Welding and Cutting | |||
61 | 1998 | Characteristics of Fiber Bragg Grating with Deuterium Loading | W. Hsu; L. A. Wang; LON A. WANG ; HSUEN-LI CHEN | SPIE | 0 | 0 | |
62 | 1998 | 控制軋延加速冷卻程程鋼構之微觀組織與銲接特性研究─總計畫(Ⅲ) | 楊哲人 | ||||
63 | 1998 | Novel two stage method for growth of highly transparent nano-crystalline diamond films | Bhusari, D. M.; Yang, J. R.; Wang, T. Y.; Chen, K. H.; Lin, S. T.; SHIANG-TAI LIN ; JER-REN YANG ; LI-CHYONG CHEN | Materials Letters | 27 | 24 | |
64 | 1998 | Effect of grinding parameters on the reliability of alumina | Tuan, W.H.; Kuo, J.C.; TuanWH | Materials Chemistry and Physics | 8 | ||
65 | 1998 | Effects of substrate pretreatment and methane fraction on the optical transparency of nanocrystalline diamond thin films | Bhusari, D. M.; Yang, J. R.; Wang, T. Y.; Chen, K. H.; Lin, S. T.; SHIANG-TAI LIN ; JER-REN YANG ; LI-CHYONG CHEN | Journal of Materials Research | 19 | 16 | |
66 | 1998 | Characteristics of plasma enhanced chemical vapor deposition-grown SiN[sub x] films prepared for deep ultraviolet attenuated phase-shifting masks | Chen, H. L.; L. A. Wang; LON A. WANG ; HSUEN-LI CHEN | Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures | 0 | 4 | |
67 | 1998 | Phase equilibria of the Si-Ge-Ti system relevant to the reactions between SiGe alloys and Ti | Jain T.A.; C. ROBERT KAO | Journal of Electronic Materials | |||
68 | 1998 | The Effect of Al<inf>2</inf>O<inf>3</inf> Addition on the Milling Behavior of NiAl Powder | Tuan, W.H.; WEI-HSING TUAN | Journal of Materials Engineering and Performance | |||
69 | 1998 | Highly transparent nano-crystalline diamond film's grown by microwave CVD | Bhusari, D. M.; Yang, J. R.; Wang, T. Y.; Lin, S. T.; Chen, K. H.; SHIANG-TAI LIN ; JER-REN YANG ; LI-CHYONG CHEN | Solid State Communications | 14 | 11 | |
70 | 1998 | 針狀肥粒鐵在水底銲接銲道中之相變態 | 楊哲人 | ||||
71 | 1998 | 控制軋延加速冷卻製程鋼構之銲接熱影響區組織研究(Ⅲ)─子計畫一--控制軋延加速冷卻製程鋼構之銲接熱影響區組織研究(Ⅲ) | 楊哲人 | ||||
72 | 1998 | 2.25CR-1MO 蒸氣管路合金鋼銲接模擬熱影響區歷經高溫長時間之相變態研究 | 楊哲人 | ||||
73 | 1998 | TiNi-based high temperature shape memory alloys | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
74 | 1998 | The deformation texture in a Ti 49 Ni 51 alloy | Chou T.S.; Wu S.K. ; HSIN-CHIH LIN | Scripta Materialia | 2 | 2 | |
75 | 1998 | Crack profiles in applied moment double cantilever beam tests | Hsueh C.H.; Sun E.Y.; Becher P.F.; Plucknett K.P.; CHUN-HWAY HSUEH | Journal of Materials Research | |||
76 | 1998 | Wide-range tunable dual-wavelength semiconductor laser using asymmetric dual quantum wells | Lin, Ching-Fuh ; Chen, Miin-Jang ; Lee, Bor-Lin | IEEE Photonics Technology Letters | 26 | 22 | |
77 | 1998 | Electronic and microstructure characterization of strontium-bismuth tantalate (SBT) thin films | Hartmann A.J.; Lamb R.N.; Scott J.F.; Johnston P.N.; El Bouanani M.; Chen C.W.; Robertson J.; CHUN-WEI CHEN | Journal of the Korean Physical Society | |||
78 | 1998 | AL2O3-NIAL層狀複合材料之開發及其機械性質研究 | 段維新 | ||||
79 | 1998 | Interfacial shear debonding problems in fiber-reinforced ceramic composites | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Acta Materialia | |||
80 | 1998 | Dry sliding wear of TiNi shape memory alloys | Liao H.M.; Lin H.C.; He J.L.; Chen K.C.; Lin K.M.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
81 | 1998 | The effects of microstructure on the mechanical properties of Al<inf>2</inf>O<inf>3</inf>-NiAl composites | Tuan, W.H.; Chou, W.B.; You, H.C.; Chang, S.T.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
82 | 1998 | Local hydrogen reactions of H*2 in a-Si:H | Robertson J.; Chen C.W.; Powell M.J.; Deane S.C.; CHUN-WEI CHEN | Journal of Non-Crystalline Solids | |||
83 | 1998 | Nature of disorder and localization in amorphous carbon | Chen C.W.; Robertson J.; CHUN-WEI CHEN | Journal of Non-Crystalline Solids | |||
84 | 1998 | Electronic structure and surface properties of SrBi2Ta2O9 and related oxides | Robertson J.; Chen C.W.; CHUN-WEI CHEN | Materials Research Society Symposium | |||
85 | 1998 | Elastic strain energy change during matrix cracking in unidirectional, fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
86 | 1998 | Microstructural design of silicon nitride with improved fracture toughness: I, Effects of grain shape and size | Becher P.F.; Sun E.Y.; Plucknett K.P.; Alexander K.B.; Hsueh C.-H.; Lin H.-T.; Waters S.B.; Westmoreland C.G.; Kang E.-S.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
87 | 1998 | Some applications of two-dimensional stress transfer analyses | CHUN-HWAY HSUEH | Acta Materialia | |||
88 | 1998 | Microstructural design of silicon nitride with improved fracture toughness: II, Effects of yttria and alumina additives | Sun E.Y.; Becher P.F.; Plucknett K.P.; Hsueh C.-H.; Alexander K.B.; Waters S.B.; Hirao K.; Brito M.E.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
89 | 1998 | Some considerations of asymmetric cracking in an applied-moment double cantilever beam | Hsueh C.H.; Sun Y E.; Becher P.F.; Li J.B.; CHUN-HWAY HSUEH | Journal of Materials Science | |||
90 | 1998 | 以火力發電廠之飛灰製備陶瓷多孔材之研究 | 段維新 | ||||
91 | 1998 | Effect of abrasive grinding on the strength and reliability of alumina | Tuan, W. H.; Kuo, J. C.; TuanWH | Journal of the European Ceramic Society | 16 | ||
92 | 1998 | Highly transparent nano-crystalline diamond films via substrate pretreatment and methane fraction optimization | Chen, K. H.; Bhusari, D. M.; Yang, J. R.; Lin, S. T.; Wang, T. Y.; SHIANG-TAI LIN ; JER-REN YANG ; LI-CHYONG CHEN | Thin Solid Films | 31 | 22 | |
93 | 1998 | The effects of microstructure on the mechanical properties of Al2O3-NiAl composites | Tuan, W.H.; Chou, W.B.; You, H.C.; Chang, S.T.; TuanWH | Materials Chemistry and Physics | |||
94 | 1997 | 半導體工業構裝材料 | 高振宏 ; 李明勳 | 化工技術 | |||
95 | 1997 | Preparation of Al2O3–AlN–Ni Composites | Tuan, Wei-Hsing ; Chou, Wen-Bing | Journal of the American Ceramic Society | |||
96 | 1997 | 控制軋延加速冷卻製程鋼構之微觀組織與銲接特性研究(II)─子計畫一:控制軋延加速冷卻製程鋼構之微觀組織與銲接特性研究 | 楊哲人 | ||||
97 | 1997 | AL2O3-NIAL 複合材料之開發研究(II)─總計畫及子計畫一:AL203-NIAL複合材料微結構設計工程 | 段維新 | ||||
98 | 1997 | Effect of truing of a diamond wheel on the strength of alumina after abrasive grinding | Tuan, W.H.; Kuo, J.C.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
99 | 1997 | The coarsening behavior of duplex Al2O3/NiAl2O4 composites | Tuan, W.H.; Lin, M.C.; Tzing, W.H.; TuanWH | Materials Chemistry and Physics | |||
100 | 1997 | Effect of sintering atmosphere on the mechanical properties of Ni/Al2O3 composites | Tuan, W. H.; Wu, H. H.; Chen, R. Z.; TuanWH | Journal of the European Ceramic Society | |||
101 | 1997 | 研磨加工對氧化鋁的可靠度影響之研究 | 段維新 | ||||
102 | 1997 | Microstructure and its influence on thermal and electrical conductivity of ZrO<inf>2</inf>-Ag composites | Liu, D.-M.; Tuan, W.H.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
103 | 1997 | The effect of stress on the Widmanstatten ferrite transformation | Yang, J. R.; Chang, L. C.; JER-REN YANG | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 23 | ||
104 | 1997 | Calculation of low-temperature phase equilibria in the indium-lead system | C. ROBERT KAO | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
105 | 1997 | Wear-resistance of TiNi intermetallics with TiN coating | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | TMS Annual Meeting | |||
106 | 1997 | Microstructures developed in solid-liquid reactions: Using Cu-Sn reaction, Ni-Bi reaction, and Cu-In reaction as examples | C. ROBERT KAO | Materials Science and Engineering A | |||
107 | 1997 | Preparation of Al2O3-AlN-Ni composites | WEI-HSING TUAN ; Chou W.-B. | Journal of the American Ceramic Society | 11 | 0 | |
108 | 1997 | Effects of interfacial roughness on fibre push-out | Hsueh C.H.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
109 | 1997 | Wear characteristics of TiNi shape memory alloys | Lin, H. C.; Liao, H. M.; He, J. L.; Chen, K. C.; Lin, K. M.; HSIN-CHIH LIN | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 75 | ||
110 | 1997 | Ion nitriding of equiatomic TiNi shape memory alloys II. Corrosion properties and wear characteristics | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
111 | 1997 | Stress transfer in a model composite containing a single embedded fiber | Hsueh C.H.; Young R.J.; Yang X.; Becher P.F.; CHUN-HWAY HSUEH | Acta Materialia | |||
112 | 1997 | Microstructural evolution of simulated heat affected zone in ASTM A533 type B steel plates | Yang, J.R.; Liou, S.H.; JER-REN YANG | Science and Technology of Welding and Joining | |||
113 | 1997 | Ion nitriding of TiNi shape memory alloys I. Nitriding parameters and microstructure characterization | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
114 | 1997 | The coarsening behavior of duplex Al<inf>2</inf>O<inf>3</inf>/NiAl<inf>2</inf>O<inf>4</inf> composites | Tuan, W.H.; Lin, M.C.; Tzing, W.H.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
115 | 1997 | Abrasion resistant active braze alloys for metal single layer technology | Shiue, R.K.; Buljan, S.T.; Eagar, T.W.; REN-KAE SHIUE | Science and Technology of Welding and Joining | |||
116 | 1997 | Influence of ion energy and substrate temperature on the optical and electronic properties of tetrahedral amorphous carbon (ta-C) films | Chhowalla M.; Robertson J.; Chen C.W.; Silva S.R.P.; Davis C.A.; Amaratunga G.A.J.; Milne W.I.; CHUN-WEI CHEN | Journal of Applied Physics | |||
117 | 1997 | A study of vacuum carburization of an equiatomic TiNi shape memory alloy | Wu S.K.; Lee C.Y.; Lin H.C.; HSIN-CHIH LIN | Scripta Materialia | |||
118 | 1997 | Reactions of solid copper with pure liquid tin and liquid tin saturated with copper | Hayashi A.; Kao C.R.; Chang Y.A.; C. ROBERT KAO | Scripta Materialia | |||
119 | 1997 | 控制軋延加速冷卻製程鋼構之後觀組織與銲接特性研究(II)─總計畫 | 楊哲人 | ||||
120 | 1997 | Elastic interaction between screw dislocations and a circular surface crack | Lin K.M.; Lin H.C.; Chen K.C.; Chang H.L.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
121 | 1997 | Wear characteristics of ion-nitrided Ti50Ni50 shape memory alloys | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
122 | 1997 | Doping mechanism in tetrahedral amorphous carbon | Chen C.W.; Robertson J.; CHUN-WEI CHEN | Materials Research Society Symposium | |||
123 | 1996 | Efficient hybrid tree/linear array architectures for block-matching motion estimation algorithms | MIIN-JANG CHEN ; LIANG-GEE CHEN ; Cheng, K.-N.; Chen, M.C. | IEE Proceedings: Vision, Image and Signal Processing | 5 | 4 | |
124 | 1996 | 以金屬顆粒及氧化鋯雙重韌化氧化鋁之研究 | 段維新 | ||||
125 | 1996 | Al2O3-NiAi複合材料之開發研究總計畫兼子計畫一:Al2O3-NiAi複合材料之微結構設計及其機械性質 | 段維新 | ||||
126 | 1996 | 丙烷轉化反應 Ga/Silicate 觸媒衰退問題的研究 | 郭錦龍 ; 萬本儒 | 第十四屆台灣區觸媒及反應工程研討會 | |||
127 | 1996 | Effects of pre-sintering heat treatment on the microstructure of barium titanate | Lu, C.-H.; Tuan, W.-H.; WEI-HSING TUAN ; Lu C.-H. | Journal of Materials Science Letters | 5 | 6 | |
128 | 1996 | Residual thermal stresses in ceramic composites. Part I: With ellipsoidal inclusions | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
129 | 1996 | A study on the wire drawing of TiNi shape memory alloys | Wu S.K. ; Lin H.C. ; Y.C. Yen | Materials Science and Engineering A | 48 | 47 | |
130 | 1996 | On the site preferences of ternary additions to triple defect B2 intermetallic compounds | Pike L.M.; Kao C.R.; Chen S.-L.; Chang Y.A.; C. ROBERT KAO | TMS Annual Meeting | |||
131 | 1996 | On the relationships between the self-diffusion parameters and the thermodynamic properties in B2 intermetallic compounds | C. ROBERT KAO | Chinese Journal of Physics | |||
132 | 1996 | A mechanism for reactive diffusion between Si single crystal and NbC powder compact | Kao C.R.; Woodford J.; Chang Y.A.; C. ROBERT KAO | Journal of Materials Research | |||
133 | 1996 | Extended dislocations around a semi-infinite crack | Lin K.M.; Lin H.C.; Chen K.C.; HSIN-CHIH LIN | Engineering Fracture Mechanics | |||
134 | 1996 | Electronic structure of the layered ferroelectric perovskite SrBi2Ta2O9 | Robertson J.; Chen C.W.; Warren W.L.; CHUN-WEI CHEN | Materials Research Society Symposium | |||
135 | 1996 | An investigation of martensitic transformation in an Fe-30Mn-6Si shape memory alloy | Lin H.C.; Lin K.M.; HSIN-CHIH LIN | Scripta Materialia | |||
136 | 1996 | Mechanical stabilization of austenite against bainitic reaction in fe-mn-si-c bainitic steel | Yang, J.R.; Huang, C.Y.; Hsieh, W.H.; Chiou, C.S.; JER-REN YANG | Materials Transactions, JIM | |||
137 | 1996 | The corrosion behaviour of A12O3 toughened by Ag particles | Tuan, W. H.; Chou, W. B.; TuanWH | Journal of the European Ceramic Society | |||
138 | 1996 | Elastic interaction between a coherent interface and a finite crack | Lin K.M.; Lin H.C.; Wang S.D.; HSIN-CHIH LIN | Physica Status Solidi (A) Applied Research | |||
139 | 1996 | Experimental and theoretical aspects of slice compression tests | Hsueh C.H.; Brandon D.G.; Shafry N.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
140 | 1996 | Residual thermal stresses in ceramic composites, part II: With short fibers | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
141 | 1996 | A study of Fe-30Mn-6Si shape memory alloys prepared from different melting techniques | Lin H.C.; Lin K.M.; Chou T.S.; HSIN-CHIH LIN | Scripta Materialia | |||
142 | 1996 | The Corrosion Behaviour of Al<inf>2</inf>O<inf>3</inf> Toughened by Ag Particles | Tuan, W.H.; Chou, W.B.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
143 | 1996 | Crack-wake interfacial debonding criteria for fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Acta Materialia | |||
144 | 1996 | The strength of duplex Al<inf>2</inf>O<inf>3</inf>-ZnAl<inf>2</inf>O<inf>4</inf> composite | Tzing, W.S.; Tuan, W.H.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
145 | 1996 | Influence of reinforcement content and diameter on the R-curve response in SiC-whisker-reinforced alumina | Becher P.F.; Hsueh C.-H.; Alexander K.B.; Sun E.Y.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
146 | 1996 | Analyses of residual thermal stresses in ceramic matrix composites | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Ceramic Engineering and Science Proceedings | |||
147 | 1996 | Debonding of interfaces between beta-silicon nitride whiskers and Si-Al-Y oxynitride glasses | Becher P.F.; Sun E.Y.; Hsueh C.-H.; Alexander K.B.; Hwang S.-L.; Waters S.B.; Westmoreland C.G.; CHUN-HWAY HSUEH | Acta Materialia | |||
148 | 1996 | Properties of tetrahedral amorphous carbon deposited by a filtered cathodic vacuum arc | Chhowalla M.; Chen C.W.; Kleinsorge B.; Robertson J.; Amaratunga G.A.J.; Milne W.I.; CHUN-WEI CHEN | Materials Research Society Symposium | |||
149 | 1996 | Reactive diffusion between silicon and niobium carbide: Application to the in-situ synthesis of a silicon carbide-niobium disilicide composite | Kao C.R.; Woodford J.; Chang Y.A.; C. ROBERT KAO | TMS Annual Meeting | |||
150 | 1996 | A12O3-NiAi複合材料之微結構設計及其機械性質 | 段維新 ; 張順太; Tuan, Wei-Hsing ; Chang, Shun-Tai | ||||
151 | 1996 | Electronic structure of the ferroelectric layered perovskite SrBi2Ta2O9 | Robertson J.; Chen C.W.; Warren W.L.; Gutleben C.D.; CHUN-WEI CHEN | Applied Physics Letters | |||
152 | 1996 | Microstructure and thermal conduction properties of Al<inf>2</inf>O<inf>3</inf>-Ag composites | Liu, D.M.; Tuan, W.H.; WEI-HSING TUAN | Acta Materialia | |||
153 | 1996 | Reaction sintering of Al<inf>2</inf>O<inf>3</inf>/NiAl<inf>2</inf>O<inf>4</inf> composites | Tuan, W.H.; Lin, M.C.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
154 | 1996 | 控制軋延加速冷卻製程鋼構之微觀組織與銲接特性研究(第一年)─控制軋延加速冷卻製程鋼構之微觀組織與銲接特性研究子計畫一:控制軋延加速冷卻製程鋼構銲件熱影 | 楊哲人 | ||||
155 | 1996 | 控制軋延加速冷卻製程鋼構之微觀組織與銲接特性研究(一)─控制軋延加速冷卻製造鋼構之微觀組織與銲接特性研究總計畫 | 楊哲人 | ||||
156 | 1996 | 機械穩定作用對矽錳合金鋼變韌鐵相變態之效應 | 楊哲人 | ||||
157 | 1996 | Criteria for progressive interfacial debonding with friction in fiber-reinforced ceramic composites | Hsueh Chun-Hway; CHUN-HWAY HSUEH | Materials Research Society Symposium | |||
158 | 1996 | R-curve response of silicon carbide whisker-reinforced alumina: microstructural influence | Sun E.Y.; Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Materials Research Society Symposium | |||
159 | 1995 | Al2O3-NiAl複合材料及功能梯度複合材料之開發研究─Al2O3-NiAl複合材料及功能梯度複合材料之開發研究 | 段維新 | ||||
160 | 1995 | 單晶鎳基超合金r′相析出及高溫塑性變形之差排機構 | 楊哲人 | ||||
161 | 1995 | Foreword | Hsueh C.-H. ; Hui D. | Composites Engineering | 1 | 0 | |
162 | 1995 | Effect of a Small Amount of Silver Addition on the Microstructure and Mechanical Properties of YBa2Cu3Ox | 段維新 ; Tien, T. C.; Tuan, Wei-Hsing | Materials Chemistry and Physics | |||
163 | 1995 | Analyses of slice compression tests for aligned ceramic matrix composites-II. Type II boundary condition | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | |||
164 | 1995 | 鈦氧合金鋼之針狀肥粒鐵相變態研究 | 楊哲人 | ||||
165 | 1995 | The Influence of Plastic Deformation and Cooling Rates on the Microstructural Constituents of an Ultra-low Carbon Bainitic Steel | Yang, J.R.; Huang, C.Y.; Chiou, C.S.; JER-REN YANG | ISIJ International | |||
166 | 1995 | Microstructural Characterization of Galvanneal Coatings by Transmission Electron Microscopy | Lin, C.S.; Meshii, M.; Cheng, C.C.; CHAO-SUNG LIN | ISIJ International | |||
167 | 1995 | Thermal diffusivity, heat capacity and thermal conductivity in Al <inf>2</inf> O <inf>3</inf> Ni composite | Liu, D.-M.; Tuan, W.H.; Chiu, C.-C.; WEI-HSING TUAN | Materials Science and Engineering B | |||
168 | 1995 | A generalized quasi-chemical model for ordered multi-component, multi-sublattice intermetallic compounds with anti-structure defects | Chen S.-L.; Kao C.R.; Chang Y.A.; C. ROBERT KAO | Intermetallics | |||
169 | 1995 | 納米級Al2O3/Ni複合材料之製程開發及機械性質評估 | 段維新 | ||||
170 | 1995 | Internal Stresses and the Martensite Start Temperature in Alumina?Zirconia Composites: Effects of Composition and Microstructure | Alexander K.B.; Becher P.F.; Wang X.?L.; Hsueh C.?H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
171 | 1995 | Toughening and strengthening of alumina with silver inclusions | Chou, W.B.; Tuan, W.H.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
172 | 1995 | Determination of the R?Curve from the Strength?XIndentation Load Relation | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
173 | 1995 | Modeling of elastic stress transfer in fiber-reinforced composites | CHUN-HWAY HSUEH | Trends in Polymer Science | |||
174 | 1995 | Thermal expansion anisotropy in hot-pressed SiC-whisker-reinforced alumina composites | Becher P.F.; Hsueh C.-H.; Waters S.B.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
175 | 1995 | Matrix cracking stresses of unidirectional ceramic matrix composites | CHUN-HWAY HSUEH | Key Engineering Materials | |||
176 | 1995 | The preparation of AI<inf>2</inf>O<inf>3</inf>/Ni composites by a powder coating technique | Tuan, W.H.; Wu, H.H.; Yang, T.J.; WEI-HSING TUAN | Journal of Materials Science | |||
177 | 1995 | Shape-memory intermetallics development in Taiwan | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | Acta Metallurgica Sinica Series A, Physical Metallurgy & Materials Science | |||
178 | 1995 | Acicular ferrite transformation in deformed austenite of an alloy-steel weld metal | Yang, J.R.; Huang, C.Y.; Huang, C.F.; Aoh, J.H.; JER-REN YANG | Journal of Materials Science | |||
179 | 1995 | Diffusional behavior in B2 intermetallic compounds | Kao C.R.; Kim S.; Chang Y.A.; C. ROBERT KAO | Materials Science and Engineering A | |||
180 | 1995 | Preparation of Al<inf>2</inf>O<inf>3</inf> Ni composites by pressureless sintering in H<inf>2</inf> | Tuan, W.H.; Lin, M.C.; Wu, H.H.; WEI-HSING TUAN | Ceramics International | |||
181 | 1995 | Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science | |||
182 | 1995 | Using Microstructure to Attack the Brittle Nature of Silicon Nitride Ceramics | Becher, P.F.; Hwang, S.-L.; Hsueh, C.-H.; CHUN-HWAY HSUEH | MRS Bulletin | |||
183 | 1995 | Stress transfer from axially loaded fiber to matrix in a microcomposite | Hsueh Chun-Hway; CHUN-HWAY HSUEH | Materials Research Society Symposium | |||
184 | 1995 | Matrix cracking with frictional bridging fibres in continuous fibre ceramic composites - Part II Cracking due to residual stresses | CHUN-HWAY HSUEH | Journal of Materials Science | |||
185 | 1995 | Phase Evolution in Galvanneal Coatings on Steel Sheets | Lin, C.S.; Meshii, M.; Cheng, C.C.; CHAO-SUNG LIN | ISIJ International | |||
186 | 1995 | The effect of phosphorus in base steel on the forming characteristics of galvannealed sheet steels: New average iron content range of galvannealed IFP steel | Lin, C.S.; Meshii, M.; CHAO-SUNG LIN | Metallurgical and Materials Transactions A | |||
187 | 1995 | Synthesis of in situ composites through solid-state reactions: thermodynamic, mass-balance and kinetic considerations | Kao C.R.; Woodford J.; Kim S.; Zhang M.-X.; Chang Y.A.; C. ROBERT KAO | Materials Science and Engineering A | |||
188 | 1995 | Effect of Specimen Number on the Determination of the Characteristic Strength and Weibull Modulus of Ceramics:an Experimental Study | Lai, M. C.; 林茂昭 ; 段維新 ; Lin, Mao-Chao ; Tuan, Wei-Hsing | Chinese Journal of Materials Science | |||
189 | 1995 | Convoy electrons for collisions between projectile He + and C foils from 17.5 to 25 keV/amu | Chu, T. C.; Lee, C. S.; Hsu, C. C.; Chang, Y. C.; Tsai, J. L.; Pai, C. F.; CHI-FENG PAI | Physical Review A | |||
190 | 1995 | Mechanical Properties of Alumina–Zirconia–Silver Composites | Tuan, Wei-Hsing ; Chen, Wai-Rue | Journal of the American Ceramic Society | |||
191 | 1995 | A modified analysis for stress transfer in fibre-reinforced composites with bonded fibre ends | CHUN-HWAY HSUEH | Journal of Materials Science | |||
192 | 1995 | Matrix cracking with bonded interfaces in unidirectional fibre-reinforced composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
193 | 1995 | Analyses of fiber push-out tests performed on Nicalon/SiC composites with tailored interfaces | Hsueh C.H.; Rebillat F.; Lamon J.; Lara-Curzio E.; CHUN-HWAY HSUEH | Composites Engineering | |||
194 | 1994 | ─Al2O3 - NiAl複合材料及功能梯度複合材料之開發研究子計畫一 | 段維新 | ||||
195 | 1994 | Toughening Zirconia with Bimodally Distributed Silver Inclusions | 段維新 ; Chen, W. R.; Tuan, Wei-Hsing | Journal of Materials Science Letters | |||
196 | 1994 | Interfacial Characterization of Al2O3/Ni Composites | Chang, L.; Chen, S. C.; 段維新 ; Tuan, Wei-Hsing | Journal of the European Ceramic Society | |||
197 | 1994 | Taiwan and Advanced Ceramics | Tuan, Wei-Hsing | Ceramic Technology International | |||
198 | 1994 | The Effect of Deformation on Acicular Ferrite Transformation in an Alloy Steel Weld Metal | 楊哲人 ; Liou, Y. H.; Yang, Jer-Ren | 1994 Annual Conference of the Chinese Society for Materials Science | |||
199 | 1994 | ─Al2O3 - NiAl複合材料及功能梯度複合材料之開發研究總計畫 | 段維新 | ||||
200 | 1994 | Effect of Sintering Profile on the Densification Behavior and Microstructure of Barium Titanate | Fang, B. K.; Lu, C. H.; 段維新 ; Lin, F. J. T.; Tuan, Wei-Hsing | 83th Annual Meeting of Chinese Material Science Society | |||
201 | 1994 | Preparation of Silver-Toughened Ceramics and Their Mechanical Properties | Tien, T. C.; 段維新 ; Tuan, Wei-Hsing | The 83th Annual Meeting of Chinese Material Science | |||
202 | 1994 | 氧化鋁/鐵複合材料之製備及其強度和韌性 | 曾偉雄; 段維新 ; Tuan, Wei-Hsing | 中華民國陶瓷學會83年度年會 | |||
203 | 1994 | The mechanical performance of alumina as a function of grain size | Tuan, W.H.; Lai, M.J.; Lin, M.C.; Chan, C.C.; Chiu, S.C.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
204 | 1994 | Theoretical and experimental studies of fiber pull-out of SiC fiber-reinforced glasses | Hsueh C.H.; Tsuda H.; Enoki M.; Kishi T.; CHUN-HWAY HSUEH | Journal of the European Ceramic Society | |||
205 | 1994 | The interactions between silver and zirconia inclusions and their effects on the toughening behaviour of Al<inf>2</inf>O<inf>3</inf> (Ag+ZrO<inf>2</inf>) Composites | Tuan, W.H.; Chen, W.R.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
206 | 1994 | Sintering of regular two-dimensional arrays of particles surface and grain boundary diffusion | Zhang W.; Schneibel J.H.; Hsueh C.-H.; CHUN-HWAY HSUEH | Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties | |||
207 | 1994 | Mechanical performance of YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7 - x</inf>-Ag composites | Tuan, W.H.; Tien, T.C.; WEI-HSING TUAN | Journal of Materials Science Letters | |||
208 | 1994 | The martensitic transformation in Ti-rich TiNi shape memory alloys | Lin H.C. ; SHYI-KAAN WU ; Lin J.C. | Materials Chemistry and Physics | 69 | 62 | |
209 | 1994 | Mechanical Performance of YBa2Cu3Ox/Ag Composite | 段維新 ; Tien, T. C.; Tuan, Wei-Hsing | Journal of Materials Science Letters | |||
210 | 1994 | 不同先前塑性變形量對變鐵相變態的影響 | 楊哲人 | ||||
211 | 1994 | The Microstructure and Mechanical Properties of Al2O3/NiAl Composites | Chou, W. B.; 段維新 ; 張順太; Tuan, Wei-Hsing ; Chang, Shun-Tai | IUMRD-ICA-94 | |||
212 | 1994 | Pull-out of a ductile fibre from a brittle matrix - Part I Shear lag model | CHUN-HWAY HSUEH | Journal of Materials Science | |||
213 | 1994 | A 2-Dimensional Stress Transfer Model for Platelet Reinforcement | Hsueh, Ch; CHUN-HWAY HSUEH | Composites Engineering | 29 | ||
214 | 1994 | Consideration of radial dependences of axial stresses in the shear-lag model for fibre pull-out | CHUN-HWAY HSUEH | Journal of Materials Science | |||
215 | 1994 | The Effect of Different Amounts of Prior Deformation on Bainite Transformation | 楊哲人 ; Hsieh, W. H.; Yang, Jer-Ren | 1994 Annual Conference of the Chinese Society for Materials Science | |||
216 | 1994 | An asymptotic approach for debonding at the fiber-matrix interface | CHUN-HWAY HSUEH | Materials Science and Engineering A | 3 | 3 | |
217 | 1994 | 氧化鋁與氧化鎳的反應燒結 | 林明程; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
218 | 1994 | Pull-out of a ductile fibre from a brittle matrix - Part II A simplified model | CHUN-HWAY HSUEH | Journal of Materials Science | |||
219 | 1994 | Slice Compression Tests Versus Fiber Push-In Tests | CHUN-HWAY HSUEH | Journal of Composite Materials | |||
220 | 1994 | Application of Thermodynamics, Phase-Equilibria and Kinetics to in-Situ Composite Synthesis Via Ternary Solid-State Displacement-Reactions | Chang, Ya; Kao, Cr; C. ROBERT KAO | Pure and Applied Chemistry | 14 | ||
221 | 1994 | Effect of addition of a small amount of silver on the microstructure and mechanical properties of YBa<inf>2</inf>Cu<inf>2</inf>O<inf>7-x</inf> | Tuan, W.H.; Tien, T.C.; WEI-HSING TUAN | Materials Chemistry and Physics | |||
222 | 1994 | Site preference of substitutional additions to triple-defect B2 intermetallic compounds | Kao C.R.; Pike L.M.; Chen S.-L.; Chang Y.A.; C. ROBERT KAO | Intermetallics | |||
223 | 1994 | The effect of steel chemistry on the formation of Fe-Zn intermetallic compounds of galvanneal-coated steel sheets | Lin, C.S.; Meshii, M.; CHAO-SUNG LIN | Metallurgical and Materials Transactions B | |||
224 | 1994 | Processamento E Projeto De Microestruturas Para Compositos Ceramica- Metal | 段維新 ; Pandolfelli, V. C.; Botta Filho, W. J.; Rodrigues, J. A.; Tomasi, R.; Tuan, Wei-Hsing | Metalurgia & Materials | |||
225 | 1994 | 釔鋇銅氧超導體及其複合材料之微結構/ 機械性質研究 | 田大昌; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
226 | 1994 | The tensile behavior of a cold-rolled and reverse-transformed equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Acta Metallurgica Et Materialia | 110 | 106 | |
227 | 1994 | 以鎳、鐵、銅、金屬韌化氧化鋁之製程、微結構及機械性質研究 | 段維新 | ||||
228 | 1994 | The Effects of Solid-Solution and Precipitation of Niobium on Bainitic Hardenability | 楊哲人 ; Huang. C. Y.; Chen, H. R.; Yang, Jer-Ren | 1994 Annual Conference of the Chinese Society for Materials Science | |||
229 | 1994 | 氧化鋁/銅複合材料之製備及其強度和韌性 | 林志隆; 段維新 ; Tuan, Wei-Hsing | 中華民國陶瓷學會83年度年會 | |||
230 | 1994 | Preparation of Al2O3/NiAl Composites | Chou, W. B.; 段維新 ; 張順太; Tuan, Wei-Hsing ; Chang, Shun-Tai | The 1994 Annual Conference of CSMS | |||
231 | 1994 | Preparation of Al2O3/Ni Composites by a Powder Coating Technique | Wu, H. H.; 段維新 ; Yang, T. J.; Tuan, Wei-Hsing | The 83th Annual Meeting of Chinese Material Science | |||
232 | 1993 | Damping Characteristics of TiNi Shape Memory Alloys | 林新智 ; Lin, H. C.; Wu, Shyi-Kaan ; Chang, Y. C.; Yeh, M. T. | 1993 Annual Conference of the Chinese Society for Materials Science, 1993 | |||
233 | 1993 | The Strength and Toughness of YBa2Cu3O7-X/Ag Composites | Tien, T. C.; 段維新 ; Tuan, Wei-Hsing | 82th Annual Meeting of Chinese Matererial Science Society | |||
234 | 1993 | 釔鋇銅氧超導體及其複合材料之微結構/機械性質關係研究 | 段維新 | ||||
235 | 1993 | The Room-Temperature Mechanical Properties of Alumina/Silver Composites | Chou, W. B.; 段維新 ; Tuan, Wei-Hsing | The 82th Annual Meeting of Chinese Material Science | |||
236 | 1993 | The Sintering and Mechanical Properties of Nickel-Coated Alumina Powder | Wu, H. H.; 段維新 ; Tuan, Wei-Hsing | The 82th Annual Meeting of Chinese Material Science | |||
237 | 1993 | Damping characteristics of TiNi shape memory alloys | Lin, H.C.; Wu, S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Metallurgical Transactions A | 115 | 101 | |
238 | 1993 | Enhancing the Mechanical Performance of Alumina Through the Addition of Metallic and Ceramic Inclusions | 段維新 ; Chen, W. R.; Tuan, Wei-Hsing | The 3rd Conference of European Ceramic Society | |||
239 | 1993 | Embedded-end debonding during fiber pull-out | CHUN-HWAY HSUEH | Materials Science and Engineering A | 7 | 4 | |
240 | 1993 | 氧化鋁/鎳複合材料之製程,微結構及機械性質研究 | 段維新 | ||||
241 | 1993 | Some considerations of two-way debonding during fibre pull-out | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
242 | 1993 | Effect of Microstructure on the Hardness and Fracture Toughness of YBa2Cu3O7-X/Ag Composites | 段維新 ; Wu, J. M.; Tuan, Wei-Hsing | Journal of Materials Science | |||
243 | 1993 | Interfacial characterisation of Al<inf>2</inf>O<inf>3</inf>-Ni composites | Chang, L.; Chen, S.C.; Tuan, W.H.; Brook, R.J.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
244 | 1993 | Effect of microstructure on the hardness and fracture toughness of YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-x</inf>/Ag composites | Tuan, W.H.; Wu, J.M.; WEI-HSING TUAN | Journal of Materials Science | |||
245 | 1993 | Phase equilibria of the cu-in system II: Thermodynamic assessment and calculation of phase diagram | Kao C.R.; Bolccwage A.; Chen S.-L.; Chen S.W.; Chang Y.A.; Romig A.D.; C. ROBERT KAO | Journal of Phase Equilibria | |||
246 | 1993 | Dependence of Weibull Modulus on Processing and Microstructures | 段維新 ; Lai, M. C.; 林茂昭 ; Tuan, Wei-Hsing ; Lin, Mao-Chao | Bulletin of the College of Engineering | |||
247 | 1993 | The Effect of Compressive Deformation on the Austenite Ferrite Formation of an Oxygen Containing Plain Carbon Steel | 楊哲人 ; Chiou, C. S.; Hsieh, W. H.; Huang. C. Y.; Yang, Jer-Ren | 1993 Annual Conference of the Chinese Society for Materials Science | |||
248 | 1993 | Determination of Heat of Transformation in a Cold-Rolled Martensitic TiNi Alloy | 林新智 ; 吳錫侃 | Metallurgical Transactions A | 85 | ||
249 | 1993 | Preparation of Alumina/Nickel Composites by a Gas Reduction Process | Tuan, Wei-Hsing ; Lin, Mao-Chao | The 3rd Conference of European Ceramic Society | |||
250 | 1993 | On the optimization of solution model parameter values of phases and the calculation of phase diagrams | Chen S.-L.; Zuo Y.; Kao C.R.; Chang Y.A.; C. ROBERT KAO | Calphad | |||
251 | 1993 | Formation of austenite from a mixture of bainitic ferrite and austenite | Yang, J.R.; Huang, C.Y.; JER-REN YANG | Materials Chemistry and Physics | |||
252 | 1993 | Effect of compressive deformation on the transformation behavior of an ultra-low-carbon bainitic steel | Huang, C.Y.; Yang, J.R.; Wang, S.C.; JER-REN YANG | Materials Transactions, JIM | |||
253 | 1993 | Microstructural examination of 2.25Cr1Mo Steel Steam pipes after extended service | Yang, J.R.; Huang, C.Y.; Yang, C.N.; Horng, J.L.; JER-REN YANG | Materials Characterization | |||
254 | 1993 | Microstructural Evolution of Y123/Ag Composites During Sintering | 段維新 ; Wu, J. M.; Tuan, Wei-Hsing | Journal of Materials Science | |||
255 | 1993 | Influence of acicular ferrite and bainite microstructures on toughness for an ultra-low-carbon alloy steel weld metal | Yang, J.R.; Huang, C.Y.; Huang, C.F.; Aoh, J.N.; JER-REN YANG | Journal of Materials Science Letters | |||
256 | 1993 | Analyses of slice compression tests for aligned ceramic matrix composites | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | |||
257 | 1993 | Evaluation of Interfacial Properties of Fiber?Reinforced Ceramic Composites Using a Mechanical Properties Microprobe | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
258 | 1993 | On the composition dependencies of self-diffusion coefficients in B2 intermetallic compounds | Kao C.R.; Chang Y.A.; C. ROBERT KAO | Intermetallics | |||
259 | 1993 | A theoretical analysis for the formation of periodic layered structure in ternary diffusion couples involving a displacement type of reactions | Kao C.R.; Chang Y.A.; C. ROBERT KAO | Acta Metallurgica Et Materialia | |||
260 | 1993 | 以銀顆粒增加釔鋇銅氧機械性質之研究 | 吳志明; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
261 | 1993 | 氧化鋁與氧化鎳的反應燒結 | 林明程; 段維新 ; Tuan, Wei-Hsing | 中華民國陶瓷學會82年度年會 | |||
262 | 1993 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IX: A simple treatment of Poisson's effect for frictional interfaces | Chun-Hway Hsueh; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
263 | 1993 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites, X: with an elastic interfacial coating | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
264 | 1993 | Evaluations of residual axial stresses and interfacial friction in Nicalon fibre-reinforced macro-defect-free cement composites | Hsueh C.H.; Ferber M.K.; CHUN-HWAY HSUEH | Journal of Materials Science | |||
265 | 1993 | Phase equilibria of the cu-in system I: Experimental investigation | Bolcavage A.; Chen S.W.; Kao C.R.; Chang Y.A.; Romig A.D.; C. ROBERT KAO | Journal of Phase Equilibria | |||
266 | 1993 | 銀顆粒的添加對氧化鋯機械性質之影響 | 陳惠如; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
267 | 1993 | 碳化矽鬚晶的致癌性 | 林明程; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
268 | 1993 | 以金屬韌化陶瓷材料之研究及發展 | 段維新 | 粉末冶金會刊 | |||
269 | 1993 | 結構陶瓷的強度測試及其標準化 | 段維新 | 機械月刊 | |||
270 | 1993 | Toughening Alumina Ceramic with Silver Inclusions | Chou, W. B.; 段維新 ; Tuan, Wei-Hsing | Chinese Journal of Materials Science | |||
271 | 1993 | The relative residual fibre displacement after indentation loading and unloading of fibre-reinforced ceramic composites | Hsueh C.H.; Ferber M.K.; Wereszczak A.A.; CHUN-HWAY HSUEH | Journal of Materials Science | |||
272 | 1992 | Hardness and Fracture Toughness of Y123/Ag Composite | 段維新 ; Wu, J. M.; Tuan, Wei-Hsing | 1992 Annual Meeting of American Ceramics Society | |||
273 | 1992 | Austenite Grain Size Effect on Microstructural Development in a Ultra-Low Carbon High-Strength Steel Weld Metal | 楊哲人 ; Huang, C. F.; Huang, C. Y.; Yang, Jer-Ren | 1992 Annual Conference of Chinese Society for Materials Science | |||
274 | 1992 | Microstructural Evolution of Y123/Ag Composites During Sintering | 段維新 ; Wu, J. M.; Tuan, Wei-Hsing | 1992 Annual Meeting of American Ceramics Society | |||
275 | 1992 | Toughening Alumina with Nickel and Silver Inclusions | 段維新 ; Chou, W. B.; Tuan, Wei-Hsing | Bulletin of the College of Engineering | |||
276 | 1992 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites VII:improved analyses for bonded interfaces | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
277 | 1992 | Microstructural Evolution of 0.03C-1.39Mn Ultra-Low Carbon Bainitic Steel | 楊哲人 ; Huang, C. Y.; Wang, S. C.; Yang, Jer-Ren | 1992 Annual Conference of the Chinese Society for Materials Science | |||
278 | 1992 | 微結構對氧化鋁可信賴度的影響之研究 | 賴彌正; 段維新 ; Tuan, Wei-Hsing | 中華民國材料科學學會81年年會論文集 | |||
279 | 1992 | Processing of alumina/nickel composites | Tuan, W.H.; Brook, R.J.; WEI-HSING TUAN | Journal of the European Ceramic Society | |||
280 | 1992 | Laser Transformation Hardening of Tempered 4340 Steel | Shiue, R. K.; Chen, C.; ShiueRK | Metallurgical and Materials Transactions A | |||
281 | 1992 | 微結構對陶瓷機械性質之影響 | 段維新 | 陶業季刊 | |||
282 | 1992 | The coexistence of acicular ferrite and bainite in an alloy-steel weld metal | Yang, J.R.; Yang, C.C.; JER-REN YANG | Journal of Materials Science Letters | 7 | 3 | |
283 | 1992 | 釔鋇銅氧/銀複合材料之機械性質研究 | 吳志明; 段維新 ; Tuan, Wei-Hsing | 中華民國材料科學學會81年年會論文集 | |||
284 | 1992 | 氧化鋁/銀複合材料之機械性質研究 | 周文彬; 段維新 ; Tuan, Wei-Hsing | 中華民國材料科學學會81年年會論文集 | |||
285 | 1992 | Requirements of frictional debonding at fiber/matrix interfaces for tough ceramic composites | CHUN-HWAY HSUEH | Composites Engineering | |||
286 | 1992 | The development of ultra-low-carbon bainitic steels | Yang, J.R.; Huang, C.Y.; Wang, S.C.; JER-REN YANG | Materials and Design | |||
287 | 1992 | The coexistence of acicular ferrite and bainite in an alloy-steel weld metal | Yang, J.R.; Yang, C.C.; Huang, C.Y.; JER-REN YANG | Journal of Materials Science Letters | |||
288 | 1992 | Modifications of fibre pull-out analysis | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
289 | 1992 | Effects of chemical composition, rolling and cooling conditions on the amount of martensite/austenite (M/A) constituent formation in low carbon bainitic steels | Wang, S.-C.; Yang, J.-R.; JER-REN YANG | Materials Science and Engineering A | |||
290 | 1992 | Strength versus energy debonding criteria at fiber/matrix interfaces | CHUN-HWAY HSUEH | Composites Engineering | |||
291 | 1992 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites. VIII: The energy-based debonding criterion | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
292 | 1992 | Effects of hot rolling on the martensitic transformation of an equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Materials Science and Engineering A | 26 | 25 | |
293 | 1992 | Microstructures and Mechanical Properties of Acicular Ferrite and Bainite (A) The Coexistence of Acicular Ferrite and Banifein Alloy- Steel Weld Metal | Yang, Jer-Ren | Journal of Materials Science Letter | |||
294 | 1992 | Compaction Behaviour of Composite Powder Mixtures | Chou, R. L.; 段維新 ; Tuan, Wei-Hsing | 1992 Annual Conference of the Chinese Society for Materials | |||
295 | 1992 | Strengthening effect on shape recovery characteristic of the equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Scripta Metallurgica et Materiala | 75 | 74 | |
296 | 1992 | 複合材料的成型性研究 | 周瑞麟; 段維新 ; Tuan, Wei-Hsing | 陶業季刊 | |||
297 | 1992 | 微結構對精密陶瓷強度的影響之研究 | 賴彌正; 段維新 ; Tuan, Wei-Hsing | 中華民國第二屆破壞科學研討會 | |||
298 | 1992 | Reactive Sintering of Alumina/Nickel Composites | 段維新 ; Brook, R. J.; Tuan, Wei-Hsing | Proceedings of the British Ceramic Soceity | |||
299 | 1992 | Microstructural Examination of 1Cr-0.5Mo Steel Superheater Steam Outler Header After 30 Years Service | 楊哲人 ; Tzeng, S. S.; Huang, C. Y.; Yang, Jer-Ren | 1992 Annual Conference of the Chinese Society for Materials Science | |||
300 | 1992 | The effects of rolling processes on the microstructure and mechanical properties of ultralow carbon bainitic steels | Wang, S.-C.; Hsieh, R.-I.; Liou, H.-Y.; Yang, J.-R.; JER-REN YANG | Materials Science and Engineering A | |||
301 | 1991 | Interfacial Film in Nickel Particle Reinforced Alumina Matrix Composite | Chang, L.; Chu, T.; 段維新 ; Tuan, Wei-Hsing | Chinese Society of Electronic Microscopy | |||
302 | 1991 | 含鈮合金鋼沃斯田鐵分解相變化動態反應研究 | 楊哲人 | ||||
303 | 1991 | Toughening in Composites of Alumina Reinforced with Nickel. Part 2, Microstructural Investigation | Chang, L.; Chen, S. C.; 段維新 ; Chu, T. Y.; Liang, S. W; Tuan, Wei-Hsing | The 80th Annual Meeting of Chinese Material Science Society | |||
304 | 1991 | 以金屬顆粒增加陶瓷超導體機械性質之研究 | 段維新 | ||||
305 | 1991 | 纖維陶瓷複合材料之發展現況 | 段維新 ; 周瑞麟; Tuan, Wei-Hsing | 機械工程 | |||
306 | 1991 | The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy | HSIN-CHIH LIN ; SHYI-KAAN WU ; Chou T.S.; Kao H.P. | Acta Metallurgica Et Materialia | 243 | 235 | |
307 | 1991 | Continuous heating transformation of bainite to austenite | Yang, J.R.; Bhadeshia, H.K.D.H.; JER-REN YANG | Materials Science and Engineering A | |||
308 | 1991 | Some Considerations of Determination of Residual Stresses and Young's Moduli in Ceramic Coatings | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
309 | 1991 | Some considerations of bridging stresses for fiber-reinforced ceramics | Hsueh C.-H.; Becher P.F.; CHUN-HWAY HSUEH | Composites Engineering | |||
310 | 1991 | 微結構對陶瓷機械性質之影響 | 段維新 | 陶磁機械性質研討會 | |||
311 | 1991 | The Study of Carbides in a 2.25 Cr-1 Mo Steel Using Carbon Extraction Replica Technique | 楊哲人 ; Yang, C. N.; Yang, Jer-Ren | 1991 Annual Conference of the Chinese Society for Materials Science | |||
312 | 1991 | 結構陶瓷的強度測試 | 賴彌正; 段維新 ; Tuan, Wei-Hsing | 粉末冶金會刊 | |||
313 | 1991 | Toughening Alumina with Silver Inclusions | 段維新 ; Chou, W. B.; Tuan, Wei-Hsing | The 2nd Conference of European Ceramics Society | |||
314 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part VI. Interpretation of fiber pull-out curves | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
315 | 1991 | Heat of premartensitic transformation in an aged Ti49Ni51 alloy | HSIN-CHIH LIN ; SHYI-KAAN WU | Scripta Metallurgica et Materiala | 27 | 23 | |
316 | 1991 | Microstructural observations of the laser-hardened 1045 steel | Shiue, R.K.; Chen, C.; REN-KAE SHIUE | Scripta Metallurgica et Materiala | |||
317 | 1991 | 膨脹儀,(80-0405-E002-16,含鈮合金鋼沃斯田鐵分解相變化動態反應研究) | 楊哲人 | ||||
318 | 1991 | Effect of retained austenite on the hydrogen content and effective diffusivity of martensitic structure | Chan, S.L.I.; Lee, H.L.; Yang, J.R.; JER-REN YANG | Metallurgical transactions. A, Physical metallurgy and materials science | |||
319 | 1991 | Thermal and mechanical induced stresses in superconducting YBa 2Cu3Ox coatings on fibers | Hsueh C.H.; Becher P.F.; Lackey W.J.; CHUN-HWAY HSUEH | Journal of Applied Physics | |||
320 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites III: With residual radial and axial stresses | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
321 | 1991 | Dual ferrite-martensite treatments of a high-strength low-alloy ASTM A588 steel | Yang, J.R.; Chen, L.J.; JER-REN YANG | Journal of Materials Science | |||
322 | 1991 | Acicular ferrite transformation in alloy-steel weld metals | Yang, J.R.; Bhadeshia, H.K.D.H.; JER-REN YANG | Journal of Materials Science | |||
323 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part V. With a viscous interface | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
324 | 1991 | Thermal stresses due to thermal expansion anisotropy in materials with preferred orientation | Hsueh C.H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
325 | 1991 | Interfacial properties of SiC-borosilicate glass composites evaluated from pushout and pullout tests | Hsueh C.-H.; Bright J.D.; Shetty D.K.; CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
326 | 1991 | Some applications of fibre pullout analyses | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
327 | 1991 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IV: sliding due to residual stresses | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
328 | 1991 | Toughening in Composites of Alumina Reinforced with Nickel. Part 1, Processing | 段維新 ; Liang, J. M.; Chu, T. Y.; Chang, L.; Tuan, Wei-Hsing | The 80th Annual Meeting of Chinese Material Science Society | |||
329 | 1991 | Austenite Transformation in a Si-Mn Steel | 楊哲人 ; Ting, J. M.; Yang, Jer-Ren | 1991 Annual Conference of the Chinese Society for Materials Science | |||
330 | 1991 | The effect of precipitation hardening on the Ms temperature in a Ti49.2Ni50.8 alloy | Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Scripta Metallurgica et Materiala | 15 | 18 | |
331 | 1991 | Toughening Behavior and Interfacial Properties of Fiber-Reinforced Ceramic Composites | CHUN-HWAY HSUEH | Journal of Energy Resources Technology, Transactions of the ASME | |||
332 | 1990 | Microstructure of Half Bead for A533 Steel | 楊哲人 ; Yang, C. C.; Yang, Jer-Ren | 1990 Annual Conference of the Chinese Society for Materials Science | |||
333 | 1990 | 固態燒結理論 | 段維新 | 粉末冶金48小時課程專輯 | |||
334 | 1990 | Gleeble Thermal Simulation for Heat-Affected Zone of Niobium Containing Steels | 楊哲人 ; Huang, C. Y.; Yang, Jer-Ren | Session 6 of the First European East-West Symposium on Materials and Processes, 1990 | |||
335 | 1990 | Sintering of Heterogeneous Ceramic Compacts:2.Zirconia/Alumina | 段維新 ; Brook, R. J.; Tuan, Wei-Hsing | Journal of Materials Science | |||
336 | 1990 | Theoretical comparison of two loading methods in fiber pull-out tests | CHUN-HWAY HSUEH | Materials Science and Engineering A | 16 | 17 | |
337 | 1990 | Microsturcture of the Heat Affected Zone in Nb Steels | 楊哲人 ; Huang, C. Y.; Yang, Jer-Ren | 1990 Annual Conference of the Chinese Society for Materials Science | |||
338 | 1990 | Processing of Alumina/Nickel Composites | 段維新 ; Brook, R. J.; Tuan, Wei-Hsing | The 43rd Pacific Meeting of American Ceramic Society | |||
339 | 1990 | 40年燒結理論的回顧與發展 | 段維新 ; Tuan, Wei-Hsing | 粉末冶金會刊 | |||
340 | 1990 | Fibre pullout against push-down for fibre-reinforced composites with frictional interfaces | CHUN-HWAY HSUEH | Journal of Materials Science | |||
341 | 1990 | A study of electrical resistivity, internal friction and shear modulus on an aged Ti 49 Ni 51 alloy | SHYI-KAAN WU ; HSIN-CHIH LIN ; Chou T.S. | Acta Metallurgica Et Materialia | 127 | 124 | |
342 | 1990 | The Preparation of Al2O3/Ni Composites by a Powder Coating Technique | 段維新 ; Wu, H. H.; Yang, T. J.; Tuan, Wei-Hsing | Journal of Materials Science | |||
343 | 1990 | The Role of Deformation Band on the High Temperature Ferrite Phase Transformation | 楊哲人 ; Chiou, C. S.; Yang, Jer-Ren | 1994 Annual Conference of the Chinese Society for Materials Science | |||
344 | 1990 | The Toughening of Ceramic with Metallic Inclusions | Tuan, Wei-Hsing | The 79th Annual Meeting of Chinese Materials Society | |||
345 | 1990 | Model for micelle formation in copolymer/homopolymer blends | Kao C.R.; De La Cruz M.O.; C. ROBERT KAO | The Journal of Chemical Physics | |||
346 | 1990 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites II: Non-constant interfacial bond strength | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
347 | 1990 | The Relation Between Creep Properties and Microstructrue in Cr-Mo Steels | 楊哲人 ; Lin, K. C.; Yang, Jer-Ren | 1990 Annual Conference of the Chinese Society for Materials Science | |||
348 | 1990 | Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites | CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
349 | 1990 | Interfacial friction analysis for fibre-reinforced composites during fibre push-down (indentation) | CHUN-HWAY HSUEH | Journal of Materials Science | |||
350 | 1990 | Toughening behavior and interfacial properties of fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | American Society of Mechanical Engineers, Petroleum Division | |||
351 | 1990 | Effects of interfacial bonding on sliding phenomena during compressive loading of an embedded fibre | CHUN-HWAY HSUEH | Journal of Materials Science | |||
352 | 1990 | Effects of Friction in Ceramic Coating/Fiber Composites | Lu M.-C.; Hsueh C.-H.; CHUN-HWAY HSUEH | Journal of Composite Materials | |||
353 | 1990 | Effect of Retained Austenite on the Behavior of Hydrogen in Martensite | 楊哲人 ; Huang, C. Y.; Lee, H. L.; Yang, Jer-Ren | 1990 Annual Conference of the Chinese Society for Materials Science | |||
354 | 1990 | Assessment Method for the Sinterability of Matrices in Ceramic Composites | 段維新 ; Brook, R. J.; Tuan, Wei-Hsing | Ceramic Transaction | |||
355 | 1990 | Evaluation of interfacial shear strength, residual clamping stress and coefficient of friction for fiber-reinforced ceramic composites | CHUN-HWAY HSUEH | Acta Metallurgica Et Materialia | |||
356 | 1990 | The Toughening of Alumina with Nickel Inclusions | 段維新 ; Brook, R. J.; Tuan, Wei-Hsing | Journal of the European Ceramic Society | |||
357 | 1989 | The Microstructure of High-Strength Alloy-Steel Weld Deposits | Yang, Jer-Ren | 1989 Annual Conference of the Chinese Society for Materials Science | |||
358 | 1989 | 陶瓷材料之燒結模式 | 段維新 | 粉末冶金會刊 | |||
359 | 1989 | Some considerations of evaluation of interfacial frictional stress from the indentation technique for fibre-reinforced ceramic composites | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
360 | 1989 | Stress-displacement relation of fiber for fiber-reinforced ceramic composites during (indentation) loading and unloading | Hsueh C.-H.; Ferber M.K.; Becher P.F.; CHUN-HWAY HSUEH | Journal of Materials Research | |||
361 | 1989 | Critical Issues and Future Directions in Sintering Science | Brook, R. J.; 段維新 ; Xue, L. A.; Tuan, Wei-Hsing | Ceramic Transaction | |||
362 | 1989 | Effect of Carbon Content and Martensitic Morphology on Hydrogen Occlusivity and Effective Hydrogen Diffusivity | 楊哲人 ; Chan, S. L. I.; Lee, H. L.; Yang, Jer-Ren | The 4th International Conference on Hydrogen Effects on Material Behavior, 1989 | |||
363 | 1989 | Theoretical and experimental analysis of the toughening behavior of whisker reinforcement in ceramic matrix composites | Becher P.F.; Becher P.F.; Hsueh C.H.; Angelini P.; Tiegs T.N.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
364 | 1989 | Reaustenitization experiments on some high-strength steel weld deposits | Yang, J.R.; Bhadeshia, H.K.D.H.; JER-REN YANG | Materials Science and Engineering A | |||
365 | 1989 | Orientation relationships between adjacent plates of acicular ferrite in steel weld deposits | Yang, J.R.; Bhadeshia, H.K.D.H.; JER-REN YANG | Materials Science and Technology (United Kingdom) | |||
366 | 1989 | Transformation temperatures of martensite and premartensite in an aged Ti 49 Ni 51 alloy | SHYI-KAAN WU ; HSIN-CHIH LIN ; Chou T.S. | Scripta Metallurgica | 14 | 12 | |
367 | 1989 | Sintering of heterogeneous ceramic compacts - Part 1 Al <inf>2</inf> O <inf>2</inf> -Al <inf>2</inf> O <inf>3</inf> | Tuan, W.H.; Gilbart, E.; Brook, R.J.; WEI-HSING TUAN | Journal of Materials Science | |||
368 | 1989 | Sintering of heterogeneous ceramic compacts - Part 2 ZrO <inf>2</inf> -Al <inf>2</inf> O <inf>3</inf> | Tuan, W.H.; Brook, R.J.; WEI-HSING TUAN | Journal of Materials Science | |||
369 | 1989 | Effects of Aspect Ratios of Ellipsoidal Inclusions on Elastic Stress Transfer of Ceramic Composites | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
370 | 1989 | Erratum: Thermal Expansion Coefficients of Unidirectional Fiber-Reinforced Ceramics (Journal of the American Ceramic Society (1988) 71:10 (9c438-9c441)) | Hsueh, C.-H.; Becher, P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
371 | 1989 | Analytical analyses of stress transfer in fibre-reinforced composites with bonded and debonded fibre ends | CHUN-HWAY HSUEH | Journal of Materials Science | |||
372 | 1989 | Elastic stress transfer from fiber to coating in a fiber-coating system | Hsueh C.-H.; Lu M.-C.; CHUN-HWAY HSUEH | Materials Science and Engineering A | |||
373 | 1989 | Sintering of Heterogeneous Ceramic Compacts:1.Alumina/Alumina | 段維新 ; Gilbart, E.; Brook, R. J.; Tuan, Wei-Hsing | Journal of Materials Science | |||
374 | 1988 | 高階動態系統積分法則之開發與研究 | 趙榮澄; 高振宏 ; 張志雄 | 化工 | |||
375 | 1988 | Elastic load transfer from partially embedded axially loaded fibre to matrix | CHUN-HWAY HSUEH | Journal of Materials Science Letters | |||
376 | 1988 | Residual stress and strain in pyrolytic boron nitride resulting from thermal anisotropy | Naito N.; Hsueh C.H.; CHUN-HWAY HSUEH | Journal of Materials Science | |||
377 | 1988 | Toughening Behavior in Whisker?Reinforced Ceramic Matrix Composites | BECHER P.F.; HSUEH C.?H.; ANGELINI P.; TIEGS T.N.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
378 | 1988 | The Dislocation Density of Acicular Ferrite in Steel Weld Deposits | Yang, Jer-Ren | 1988 Annual Conference of the Chinese Society for Materials Science | |||
379 | 1988 | Effect of Cyclic Heating on the Sintering of Iron Powder | 段維新 ; Matsumura, G.; Tuan, Wei-Hsing | Power Metallurgy International | |||
380 | 1988 | Comment on ?§Sintering with Rigid Inclusions?? | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
381 | 1988 | Sintering of Whisker?Reinforced Ceramics and Glasses | Hsueh, C.?H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
382 | 1988 | Effects of Interfacial Films on Thermal Stresses in Whisker?Reinforced Ceramics | HSUEH C.?H.; BECHER P.F.; ANGELINI P.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
383 | 1988 | Effect of Silver Inclusions on the Strength and Toughness of Yba2Cu3O7-X | 段維新 ; Tien, T. C.; Tuan, Wei-Hsing | Bulletin of the College of Engineering | |||
384 | 1988 | Analytical Evaluation of Interfacial Shear Strength for Fiber?Reinforced Ceramic Composites | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
385 | 1988 | Some Considerations of Nonideal Transformation?Zone Profile | HSUEH C.?H.; BECHER P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
386 | 1988 | Thermal Expansion Coefficients of Unidirectional Fiber?Reinforced Ceramics | Hsueh C.?H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
387 | 1988 | Evaluation of Bridging Stress from R?Curve Behavior for Nontransforming Ceramics | Hsueh C.?H.; Becher P.F.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
388 | 1987 | High?Temperature Stress Corrosion Cracking in Ceramics | CAO, H.C.; DALGLEISH, B.J.; HSUEH, C.?H.; EVANS, A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
389 | 1987 | Liquid?Phase Sintering of Ceramics | MARION, J.E.; HSUEH, C.H.; EVANS, A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
390 | 1986 | Sintering behaviour of powder compacts with multiheterogeneities | CHUN-HWAY HSUEH | Journal of Materials Science | |||
391 | 1986 | Behavior of Large Pores During Sintering and Hot Isostatic Pressing | EVANS, A.G.; HSUEH, C.H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
392 | 1986 | Mathematical Model of Viscosity Measurements for Viscoelastic Solids | CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
393 | 1986 | Viscoelastic stresses and sintering damage in heterogeneous powder compacts | Hsueh, C.H.; Evans, A.G.; Cannon, R.M.; Brook, R.J.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
394 | 1986 | Transient stresses in bimodal compacts during sintering | De Jonghe, L.C.; Rahaman, M.N.; Hsueh, C.H.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
395 | 1986 | Creep During Sintering of Porous Compacts | RAHAMAN M.N.; DE JONGHE L.C.; HSUEH C.H.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
396 | 1986 | Influence of Multiple Heterogeneities on Sintering Rates | Hsueh, C.?H.; Evans, A.G.; Mcmeeking, R.M.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
397 | 1985 | 多向位研磨裝置 | 段維新 | ||||
398 | 1985 | Residual Stresses in Meta/Ceramic Bonded Strips | HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
399 | 1985 | Effects of heterogeneity shape on sintering induced stresses | CHUN-HWAY HSUEH | Scripta Metallurgica | |||
400 | 1985 | Fatigue crack propagation in oil environments- II. A model for crack closure induced by viscous fluids | Tzou, J.-L.; Hsueh, C.H.; Evans, A.G.; Ritchie, R.O.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
401 | 1985 | Sintering of a ceramic film on a rigid substrate | CHUN-HWAY HSUEH | Scripta Metallurgica | |||
402 | 1985 | Residual Stresses and Cracking in Metal/Ceramic Systems for Microelectronics Packaging | HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
403 | 1984 | Particle Rotation in Early Sintering | HSUEH C.?H.; DE JONGHE L.C.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
404 | 1984 | Effect of Repetitive Phase Transformations on the Sintering of Iron Wires | Matsumura, G.; 段維新 ; Tuan, Wei-Hsing | Powder Metal International | |||
405 | 1983 | Oxidation induced stresses and some effects on the behavior of oxide films | Hsueh C.H.; Evans A.G.; CHUN-HWAY HSUEH | Journal of Applied Physics | |||
406 | 1983 | A damage model of creep crack growth in polycrystals | Thouless, M.D.; Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
407 | 1983 | Microstructure evolution during sintering: The role of evaporation/condensation | Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
408 | 1983 | Experimental Assessment of Pore Breakaway During Sintering | SAKARCAN M.; HSUEH C.H.; EVANS A.G.; CHUN-HWAY HSUEH | Journal of the American Ceramic Society | |||
409 | 1982 | Thermal Cycling and Dual Phase Treatments of HSLA Steel | 楊哲人 ; Chen, L. J.; Lin, W. T.; Yang, Jer-Ren | 3rd R.O.C. Symposium of Electron Microscopy | |||
410 | 1982 | High-Frequency Characteristics of Gaaias Injection-Lasers | Figueroa, L.; Slayman, Cw; Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
411 | 1982 | Microstructure development during final/intermediate stage sintering-I. Pore/grain boundary separation | Hsueh, C.H.; Evans, A.G.; Coble, R.L.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
412 | 1981 | Dual Ferrite-Martensite Treatments of an ASTM A588 HSLA Steel | 楊哲人 ; Chen, L. J.; Yang, Jer-Ren | 39th Annual Proceding Electron Microscopy Society American | |||
413 | 1981 | Overview 14 Creep fracture in ceramic polycrystals-II. effects of inhomogeneity on creep rupture | Hsueh, C.H.; Evans, A.G.; CHUN-HWAY HSUEH | Acta Metallurgica | |||
414 | 1980 | Optical-Injection Locking of Si Impatt Oscillators | Yen, Hw; HUNG-WEI YEN | Applied Physics Letters | 16 | ||
415 | 1980 | Studies of (gaal)as Injection-Lasers Operating with an Optical Fiber Resonator | Figueroa, L.; Lau, Ky; Yen, Hw; Yariv, A.; HUNG-WEI YEN | Journal of Applied Physics | 17 | ||
416 | 1979 | Optical-Injection Locking of Si-Impatt Oscillators | Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
417 | 1978 | Optical Injection Locking and Switching of Transistor Oscillators | Yen, Hw; Barnoski, Mk; HUNG-WEI YEN | Applied Physics Letters | |||
418 | 1977 | Switching of Gaas Impatt Diode Oscillator by Optical Illumination | Yen, Hw; Barnoski, Mk; Hunsperger, Rg; Melville, Rt; HUNG-WEI YEN | Applied Physics Letters | 44 | ||
419 | 1976 | Gaas Distributed Bragg Reflector Lasers | Yen, Hw; Ng, W.; Samid, I.; Yariv, A.; HUNG-WEI YEN | Optics Communications | |||
420 | 1976 | Room-Temperature Operation of Gaas Bragg-Mirror Lasers | Ng, W.; Yen, Hw; Katzir, A.; Samid, I.; Yariv, A.; HUNG-WEI YEN | Applied Physics Letters | 30 | ||
421 | 1975 | Gaas-Gaalas Double-Heterostructure Injection Lasers with Distributed Feedback | Nakamura, M.; Aiki, K.; Umeda, J.; Katzir, A.; Yariv, A.; Yen, Hw; HUNG-WEI YEN | Ieee Journal of Quantum Electronics | |||
422 | 1975 | Gaas-Gaalas Distributed-Feedback Diode Lasers with Separate Optical and Carrier Confinement | Aiki, K.; Nakamura, M.; Umeda, J.; Yariv, A.; Katzir, A.; Yen, Hw; HUNG-WEI YEN | Applied Physics Letters | 70 | ||
423 | 1974 | Liquid-Phase Epitaxy of Gaalas on Gaas Substrates with Fine Surface Corrugations | Nakamura, M.; Aiki, K.; Umeda, J.; Yariv, A.; Yen, Hw; Morikawa, T.; HUNG-WEI YEN | Applied Physics Letters | 22 | ||
424 | 1974 | Gaas-Ga1-Xalxas Double-Heterostructure Distributed-Feedback Diode Lasers | Nakamura, M.; Aiki, K.; Umeda, J.; Yariv, A.; Yen, Hw; Morikawa, T.; HUNG-WEI YEN | Applied Physics Letters | |||
425 | 1973 | Laser Oscillation in Epitaxial Gaas Waveguides with Corrugation Feedback | Nakamura, M.; Yen, Hw; Yariv, A.; Garmire, E.; Somekh, S.; Garvin, Hl; HUNG-WEI YEN | Applied Physics Letters | 87 | ||
426 | 1973 | Optically Pumped Gaas Surface Laser with Corrugation Feedback | Nakamura, M.; Yariv, A.; Yen, Hw; Somekh, S.; Garvin, Hl; HUNG-WEI YEN | Applied Physics Letters | 140 |